Loading ...
Loading ...
Loading ...
13
8. Select CYCLE*
Turn cycle knob to select your wash cycle. See “Cycle Guide”
for details on cycle features.
The display will show the default settings for the selected
cycle. To adjust a setting, touch its name – Wash Temp, Spin,
or Soil. Adjusting settings will change the Estimated Time
Remaining. Tightly packing the load, unbalanced loads, or
excessive suds may also cause the washer to increase the
cycle time.
9. Adjust settings, if desired*
10. Select any additional options*
To add an option to the cycle, touch its name – Extra Rinse,
Cycle Signal, or Control Lock. To remove an option from the
selected cycle, touch the option again.
11. Setting a delayed wash
If you do not want to begin a cycle immediately, you may
choose the Delay Wash option. This will delay the start
of the wash cycle by up to 8 to 12 hours depending on
your model.
To set a Delayed Start:
1. Touch ADJUST DELAY TIME + or – to set the desired
delay time.
2. Touch START to start the delay countdown. The countdown
stops blinking.
* Not all options and settings are available with all cycles.
See “Cycle Guide” for available options and settings.
7. Touch POWER to turn on washer
Slowly close the dispenser drawer. Make sure the drawer is
closed completely, then touch POWER to turn on the washer
or go to Step 8.
Loading ...
Loading ...
Loading ...