Loading ...
Loading ...
Loading ...
5
Control Panel and Features
Not all features and cycles are available on all models.
NOTES:
n
The control panel features a sensitive surface that responds to a light touch of your finger. To ensure your selections are registered,
touch the control panel with your fingertip, not your fingernail. When selecting a setting or option, simply touch its name.
n
At cycle completion, your setting and option choices will be remembered for your next use of that cycle. However, if power is lost
to the washer, the settings and options will go back to the factory defaults.
3
21
5
BA
4
POWER
Touch to turn the washer on and off. Touch to stop/cancel
a cycle at any time.
NOTE: Turning the Wash Cycle knob will also turn the
washer on.
WASH CYCLE KNOB
Turn the knob to select a cycle for your laundry load. An LED
will light up for the cycle selected.
NOTE: The Clean Washer with affresh
®
LED will flash when
the washer has run 30 wash cycles as a reminder to run the
Clean Washer with affresh
®
cycle.
See “Cycle Guide” for detailed descriptions of cycles.
NOTE: For best results when using the Wash & Dry cycle,
use for loads weighing 2 lbs and less, such as a soccer
uniform or a running tank and shorts. Allow the cycle to
run the full duration of 12 hours.
START
Touch and hold for 3 seconds until the light above START
comes on to start a cycle, or touch once while a cycle is in
process to pause it. If you want to add a garment, you can
touch START when the “Add Garment” LED is on.
LED DISPLAY AND SETTINGS
When you select a cycle, its default settings will light up and
the Estimated Time Remaining will be displayed. Factors
such as load size, wash temperature, and water pressure
may affect the time shown in the display. Tightly packing,
unbalanced loads, or excessive suds may cause the washer
to lengthen the cycle time, as well.
Touch the desired setting along the bottom of the display
to adjust. See “Cycle Guide” for available settings on each
cycle. Not all settings are available with all cycles.
1
2
3
4
Cycle Status Lights
The Cycle Status Lights show the progress of a cycle.
At each stage of the process, you may notice sounds or
pauses that are different from traditional washers.
Door Locked
Door Locked will light to indicate that the door is locked
and cannot be opened without first pausing or canceling
the cycle.
Add Garment
When Add Garment is lit, you may pause the washer, open
the door, and add items. Touch and hold START to start the
washer again.
Done
Once the cycle is complete, this light will come on.
Remove the load promptly for best results.
Delay Wash
This will light when a delay time has been set.
Wash Temp
The recommended wash temperature is preset for each
cycle. You may also select a wash temperature based on
the type of fabric and soils being washed. For best results,
use the warmest wash water safe for your fabric, following
the garment label instructions. All wash temperatures
feature a cold rinse.
Spin
This washer automatically selects the spin speed
based on the cycle selected. Some preset speeds
can be changed.
n
Faster spin speeds mean shorter dry times, but may
increase wrinkling in your load.
n
Slower spin speeds reduce wrinkling, but will leave
your load more damp.
Loading ...
Loading ...
Loading ...