Loading ...
Loading ...
Loading ...
^
Open the appliance door.
^ Hang the door panel on the threaded
bolts h.
^ Screw the nuts c loosely onto bolts.
^ Close the door and check the
distance between the door and
neighboring cabinet doors. The gaps
should be even.
Adjusting the position of the door
– Side adjustments (X)
^ Adjust the door panel.
– Height adjustment (Y)
^ Tighten the nuts with a wrench h.
A gap of 3/8" (8 mm) is factory set
between the appliance door and the
bracket. This must only be adjusted
within its permitted range.
Installing the appliance
88
Loading ...
Loading ...
Loading ...