Loading ...
Loading ...
Loading ...
Rinsing the ice cube maker
Rinse out the ice cube maker and
the water pipes:
– before using for the first time,
– if the ice cube maker has not been
used for quite a while,
– regularly (at least once a month) if
it is constantly being used, to
remove any ice residues and
therefore avoid an blockages in the
water pipes, and
– before switching the ice cube
maker off for an extended period of
time.
After selecting "Rinse the ice cube
maker," the ice cube maker b and the
water pipes will automatically be rinsed.
The ice cube tray will turn to the
cleaning position so that it can be dried
by hand.
The water is collected in the ice cube
drawer a.
Ensure the ice cube drawer is empty
before selecting the "Rinse the ice
cube maker" setting. The water will
otherwise flow onto the contents of
the drawer.
"Rinse the ice cube maker" can only
be selected when the ice cube
maker is switched on.
^ Touch the settings button.
All symbols available for selection will
appear in the display and the 0 symbol
flashes.
^ Touch the buttons for setting the
temperature (X or Y) repeatedly until
the symbol for the ice cube maker ®
flashes in the display.
^
Touch the OK button to confirm your
selection.
^
The required setting can be selected
by touching the X and Y buttons:
0: Ice cube maker is switched off
1: Ice cube maker is switched on
2: Set the water quantity
3: Set cleaning position for the ice
cube tray
4: Rinse the ice cube maker
Cleaning
39
Loading ...
Loading ...
Loading ...