User Manual - Page 187

For DW60M6040SS/EG. Also, The document are for others Samsung models: DW60M6050**, DW60M6051**, DW60M6040**, DW60M6031**, DW60M6040SS

Loading ...
Loading ...
Loading ...
Using the detergent and water softener _19
02
USING THE DETERGENT AND WATER SOFTENER
Using the detergent and water
softener
WATER SOFTENER MODE (WATER HARDNESS LEVEL SETTING)
The dishwasher is designed to allow for adjusting the amount of salt consumed based on the hardness of
the water used. This is intended to optimise the level of salt consumption. To set the salt consumption,
proceed as below:
1. Switch on the appliance;
2. Press the button for more than 5 seconds to start the water softener set model
Press the button to select the proper set according to your local environment,
H2 H3 H4 H5 H6; It is r
ecommended that
adjustments should be made in accordance with the following table.
* The manufactory setting: H3 (EN 50242)
3. Wait for 5 seconds to end the set up model.
WATER HARDNESS
Selector Position
Salt consumption
(gram/cycle)
º dH º fH º Clark mmol/l
0-5 0-9 0-6 0-0.94 H1 0
6-11 10-20 7-14 1.0-2.0 H2 9
12-17 21-30 15-21 2.1-3.0 H3 12
18-22 31-40 22-28 3.1-4.0 H4 20
23-34 41-60 29-42 4.1-6.0 H5 30
35-55 61-98 43-69 6.1-9.8 H6 60
1 dH (German degree) = 0.178 mmol/l
1 Clark (British degree) = 0.143 mmol/l
1 fH (French degree) = 0.1 mmol/l
Contact your local water board for information on the hardness of your water supply.
WATER SOFTENER
The hardness of the water varies from place to place. If hard water is used in the dishwasher, deposits
may form on dishes and utensils. The appliance is equipped with a special softener that uses a salt
specifically designed to eliminate lime and minerals from the water.
[Deposits on utensils]
DW5500M-02437D-00_EN.indd 19DW5500M-02437D-01_EN.indd 19 3/14/2017 5:30:35 PM3/14/2017 5:30:35 PM
Pre W h o Program
within 60 seconds after the appliance was switched on;
Pre Wash o Program
as
the sets will change in the following sequence: H1
r
r
Regeneration will be operated in dry phase with an additional 2.0–2.5 l of water being
used and 4–10 minutes taken for the cycle.
The energy used may be increased however this should be by an insignicant amount.
Loading ...
Loading ...
Loading ...