Loading ...
Loading ...
Loading ...
3. Mark point P on the wall or screen.
4. Back up the vehicle 5,000 mm (197.0 in,
16.4 ft) straight away from the wall or
screen.
”L” is the distance between the wall or
screen to the vehicle’s front bumper.
5. Apply the parking brake.
Adjusting the headlight aim
Be sure that the vehicle is parked directly
vertical to the wall on which the headlights
will be projected.
1. Turn on the headlight low beam
2. Open the hood.
3. Turn the aiming adjustment screws
䊊
1
䊊
2
, located inside the engine compart-
ment, until the headlight projection, on
the wall or screen, does not move.
NOTE:
The aim adjustment screws are located
on each side of the headlights. The lower
screw
䊊
1
is used to adjust the horizontal
aim. The upper screw
䊊
2
is used to adjust
the vertical aim.
The screws can be turned indefinitely in
each direction. Therefore be sure to ob-
serve the headlight projection move-
ment to determine the necessary turn-
ing amount.
LDI2979
Do-it-yourself 8-25
Loading ...
Loading ...
Loading ...