Loading ...
Loading ...
Loading ...
If Honda MTF is not available, you
may use an SAE 10W-30 or 10W-40
viscosity motor oil with the API
Certification seal that says ‘‘FOR
GASOLINE ENGINES’’ as a
temporary replacement. However,
motor oil does not contain the proper
additives, and continued use can
cause stiffer shifting. Replace as
soon as it is convenient.
Check the fluid level with the
transmission at normal operating
temperature and the vehicle sitting
on level ground. Remove the
transmission filler bolt, and carefully
feel inside the bolt hole with your
finger. The fluid level should be up
to the edge of the bolt hole. If it is
not, add Honda Manual
Transmission Fluid (MTF) until it
starts to run out of the hole. Reinstall
the filler bolt, and tighten it securely.
The transmission should be drained
and refilled with new fluid according
to the maintenance minder (see page
).
If you are not sure how to add fluid,
contact your dealer.
303
CONTINUED
Manual Transmission Fluid
Automatic Transmission Fluid, Manual Transmission Fluid
Maintenance
321
FILLER BOLT
Correct Level
Correct Level
SiDX, Canadian DX-G, LX, EX, EX-L
FILLER BOLT
Use only Honda Genuine ATF-Z1
(Automatic Transmission Fluid). Do
not mix with other transmission f luids.
Using transmission f luid other than
Honda Genuine ATF-Z1 may cause
deterioration in transmission operation
and durability, and could result in
damage to the transmission.
Damage resulting f rom the use of
transmission f luid other than Honda
Genuine ATF-Z1 is not covered by the
Honda new vehicle warranty.
０８／０７／０８ １１：２７：４８ ３１ＳＶＡ６３０ ０３２６
2009 Civic Coupe
Table Of Contents
Main Menu
Loading ...
Loading ...
Loading ...