DV331A User Manual

Loading ...

Temperature Display Mode(in Celsius)

Denition of Temperature Display Mode:

- With power on, Press Sinal and Wrinkle Prevent keys simultanously for 3 seconds.

- This action will put the dryer into Touch Sensor Mode

- Under“TouchSensorMode”,PressTimeandWrinklePreventKeysatthesametime.

- Then the dryer will display the temperature of drum inside in Celsius.

How to Enter:

- UndernormalUserMode,Press“SignalandWrinklePrevent”Keyssimultanouslyfor3seconds

- Thenpress“TimeandWrinklePrevent”keysatthesametime.

• Converting °C



°F

Celsius(°C) -30 -10 10 30 50 70

F =9/5C + 32

Fahrenheit(°F) -22 14 50 86 122 158

Software Version Mode

Denition of Software Version Mode:

- While in Service Mode pressing the Temp key will put the dryer into the software version

mode

How to Enter:

- To enter Special Test Mode press Temp Key until the control beep.

ex)Incaseof“U105”,U1meansmajorversion“U1”,05meansminorversion“05”.

System Check Mode

Special Test Mode:

- While in Power O, pressing the Dryness Level + Power keys simultaneously will put the dryer

into the System Check mode

- “t2“willdisplay.

- System Check Mode Progress t2 mode Function Performed Start/Pause

Motor(CW)RelayOn



HeaterRelayOn



HeaterRelayO



Motor(CW)RelayO

(Circulation)

ALIGNMENT AND ADJUSTMENTS

WARNING

To avoid risk of electrical shock, personal injury or death; disconnect power to dryer before

servicing, unless testing requires power.

Technical_information-02365B-07_EN.indd 4 2011-09-21 �� 3:02:35

Loading ...

User Manual - Page 4