DV331A User Manual

Loading ...

TEST MODE

Continuous Run Mode:

1. PressSignal+DryLevelfor3secduringPowerOnState(NormalUserMode).

2. OnceinContinuousRunMode,7-Segmentwilltoggledisplay“totalcycle”andtheremaining

time.

3. ThepreviouscyclewillrestartduringContinuousRunModeuntilcontinuousrunmodeis

disabled.

4. DuringContinuousRunMode,pressSignal+DrynessLevelfor3secondstoreturntonormal

usermode.7-segmentwillnolongdisplay“totalcycle”andonlydisplaytheremainingtime.

Cycle Count Mode

Denition of Cycle Count Mode:

- While in Service Mode pressing the Signal key will put the dryer into the cycle count mode

- Cycle number executed will display.

How to Enter:

- To enter Special Test Mode press While in Service Mode pressing the Signal key for 3 seconds

or until the control beep.

Special Test Mode

Denition of Special Test Mode:

- Dryer must be on before Service Mode can be entered.

- Press Signal and Temp Keys for 3 seconds, or until 3 beeps are heard.

- The machine will now be in Service Mode.

- UponentryintoServiceMode,theSensorBarTouchDatawillbeshown(DefaultSpecialTest

Mode).

How to Enter:

- To enter Special Test Mode press Signal and Temp Keys for 3 seconds for 3 seconds or until

the control beep.

Sensor Bar Touch Data Mode

Denition of Sensor Bar Touch Data Mode:

- With Power On pressing Signal and Temp Keys for 3 seconds

- This action will put the dryer into sensor bar touch data mode

- Dryer will display Sensor Bar data. This mode is default mode of entering service mode

How to Enter:

- With Power On pressing Signal and Temp Keys for 3 seconds

ALIGNMENT AND ADJUSTMENTS

WARNING

To avoid risk of electrical shock, personal injury or death; disconnect power to dryer before

servicing, unless testing requires power.

Technical_information-02365B-07_EN.indd 3 2011-09-21 �� 3:02:35

Loading ...

User Manual - Page 3