Loading ...
Loading ...
Loading ...
INSTALLATION INSTRUCTIONS
Before Using Your Freezer
Remove the exterior and interior packing.
Check to be sure you have all the following parts:
1 Storage Basket
1 Instruction Manual
1 Plastic Scraper (optional)
Before connecting the freezer to the power source, let it stand upright
for approximately 2 hours. This will reduce the possibility of a
malfunction in the cooling system from handling during transportation.
Clean the inside with a damp warm cloth with water and baking soda
solution.
Installing Your Freezer
This appliance is designed to be freestanding only, and should not be
recessed or built-in.
Place your freezer on a floor that is strong enough to support the freezer
when it is fully loaded.
Allow 6 inches of space between the back and sides of the freezer, to
allow the proper air circulation.
Place the freezer away from direct sunlight and heat sources (stove,
heater, radiator, etc.). Direct sunlight may affect the acrylic coating and
heat sources may incr
ease electrical consumption. Extreme cold
environmental temperatures may also cause the freezer not to perform
Do not use extension cords.
Electrical Connection
For your safety please read the following information
OPERATING YOUR FREEZER
Temperature Control
Your freezer has one control for regulating
the temperature. The temperature control is
located on the lower right hand corner.
MAX
OFF
MIN
properly.
Avoid locating the freezer in moist areas.
After plugging the appliance into a wall
outlet, allow the unit to cool down for 2~3 hours
before placing food in the freezer compartment.
Plug the freezer into an exclusive,
properly installed-grounded wall outlet. Do not
under any circumstances, cut or remove the
third (ground) prong from the power cord. Any
questions concerning power and/or grounding
should
be directed toward a certified
electrician or an authorized service center.
Loading ...
Loading ...
Loading ...