Loading ...
Loading ...
Loading ...
DISPLAY UNITS (STANDARD/METRIC)
The display can be changed to display either standard or metric units of
measurement.
The reverse override button acts as the MODE button when pressed and
released quickly. The transmission cannot be in reverse when using the override
button as a MODE button. This feature does not contain a vehicle speed lockout
function and can be used at any operating speed.
NOTE
To exit the set-up mode at any time, wait 10 seconds.The display automatically
exits and returns to the odometer display.
Standard Display Metric Display
Distance Miles Kilometers
Time 12–Hour Clock 24–Hour Clock
1. Turn the key to the OFF position.
2. Place the transmission in neutral.
3. Press and hold the MODE button while turning the key to the ON position.
4. When the display flashes the distance setting, tap the MODE button to
advance to the desired setting.
5. Press and hold the MODE button to save the setting and advance to the next
display option.
6. Repeat the procedure to change remaining display settings.
CLOCK MODE
TIP
The clock must be reset any time the battery has been disconnected or
discharged.
To set the clock time, do the following:
1. Turn the key to the ON position. Use the MODE button to toggle to the
odometer display.
2. Press and hold the MODE button until the hour segment flashes. Release
the button.
3. With the segment flashing, tap the MODE button to advance to the desired
setting.
39
FEATURES AND CONTROLS
Loading ...
Loading ...
Loading ...