Loading ...
Loading ...
Loading ...
10
!
i
155
PRACTICAL INFORMATION
PEUGEOT will not accept responsi-
bility for the cost incurred in repairing
your vehicle or for rectifying malfunc-
tions resulting from the installation
of accessories not supplied and not
recommended by PEUGEOT and
not installed in accordance with its
instructions, in particular when the
combined consumption of all of the
additional equipment connected ex-
ceeds 10 milliamperes.
Installing electrical accessories
Your vehicle's electrical system is
designed to operate with standard
or optional equipment.
Before installing other electrical
equipment or accessories on your
vehicle, contact a PEUGEOT dealer
or a qualifi ed workshop.
CHANGING A FUSE
Access to tooling
The extraction tweezer is fi tted to the
back of the dashboard fusebox cover.
For access to them:
turn the screw a quarter of a turn to
the left,
unclip the cover by pulling the top
right,
disengage and pull away the cover,
remove carrier on the back of which
is fi tted the tweezer.
Changing a fuse
Before changing a fuse, you must:
identify and correct the cause of the
fault,
switch off all all electrical consumers,
immobilise the vehicle and switch
the ignition off,
identify the failed fuse using the al-
location tables and layout diagrams
in the following pages.
Good Failed
Tweezer
When changing a fuse, you must:
use the special tweezer to extract
the fuse from its housing and check
its fi lament,
always replace the failed fuse with
a fuse of the same rating (same co-
lour); using a different rating may
cause faults (risk of fi re).
If the fuse fails again soon after it is
changed, have the electrical system
checked by a PEUGEOT dealer or a
qualifi ed workshop.
Loading ...
Loading ...
Loading ...