Loading ...
Loading ...
Loading ...
25
ENGLISH
HOW TO USE
FABRIC SOFTENER
The fabric softener is dispensed in the final rinse.
Select the Fabric Softener option to optimize the final
rinse for fabric softener use.
EXTRA RINSE
This option will add an extra rinse to the selected cycle.
Use this option to help ensure the removal of detergent
or bleach residue from fabrics. Liquid fabric softener, if
used, is always dispensed in the final rinse.
NOTE:
You cannot select the Extra Rinse option with
the Spin Only option and Tub Clean cycle.
WATER PLUS
Use this option to add extra water to the wash cycle for
better wash performance and stain treatment of large or
bulky items.
NOTE:
y If the washing machine reaches its maximum water
level, the WATER PLUS button will have no effect.
y The Water Plus option can only be selected or
deselected while the cycle is running.
y Once the Water Plus option has been added to a
cycle, it is saved as a default option on that cycle
until you deselect it.
y To deselect the option, press WATER PLUS after
starting the cycle.
Adding the Water Plus Option to a Cycle
1. While the cycle is running, press START/PAUSE to
pause the cycle
2. Press WATER PLUS to add Water Plus as a default
option for that cycle.
3. Press START/PAUSE to resume the cycle.
SIGNAL
The washing machine plays a melody when the wash
cycle has finished. The volume of the melody is
adjusted using the SIGNAL button.
Press the SIGNAL button repeatedly to adjust the
volume of the signal. When no signal is heard, the
signal is off. The volume settings are LOW – HIGH –
OFF. The signal volume can be adjusted at any time as
long as the washer is turned ON.
CONTROL LOCK
Use this option to disable the controls. This feature can
prevent children from changing cycles or operating the
machine. Once the CONTROL LOCK is set, it must be
deactivated before any controls, except the POWER
button, can be used. Once the washer has shut off,
the POWER button will allow the machine to be turned
ON, but the controls will still be locked. When the
controls are locked, CL will display alternately with the
estimated time remaining.
Press and hold the SIGNAL button for 3 seconds to
activate or deactivate CONTROL LOCK.
NOTE: Once the controls are locked, they must be
manually unlocked to restore operation.
ADD GARMENTS
Laundry may ONLY be added to the load at the
proper time in the wash cycle. When the Add
Garments light is illuminated, it is safe to pause the
cycle and add more items to the load. If garments
are added when the Add Garments light is off, the
washer will not adjust for these items which could
result in poor performance and/or fabric damage.
1. Press the START/PAUSE button to pause the
washer.
2. Open the lid after it unlocks.
3. Add your additional items.
4. Close the lid.
5. Press the START/PAUSE button. The cycle will
resume after the lid locks.
NOTE:
y The ADD GARMENTS light is an indicator only
and is not selected by pressing the SPECIAL USE
button.
y If the washer remains idle for 4 minutes after
pausing the cycle, the water in the tub will drain.
MFL68267016_E_A5.indd 25 16. 11. 23. 오전 11:05
Loading ...
Loading ...
Loading ...