Loading ...
Loading ...
Loading ...
24
HOW TO USE
OPTION BUTTONS
Your washing machine features several additional cycle
options that customize cycles to meet your individual
needs. To use these options, select the desired option
AFTER selecting the desired cycle.
After selecting the desired cycle and settings, press
the cycle option button(s) for the option(s) you would
like to add. The button will light when that option is
selected. If the selected option is not allowed for the
selected cycle, the chime will sound twice to alert you
and the LED will not illuminate.
NOTE:
y To protect your garments, not every option is
available with every cycle.
y If the START/PAUSE button is not pressed within 60
minutes to start the cycle, the control will shut off
and all settings will be lost.
COLD WASH
This option saves energy by using cold water while
increasing the wash and rinse times to maintain wash
performance.
NOTE:
y The Stain Care feature cannot be selected with the
Cold Wash option.
y Wash time will increase up to 50% with the Cold
Wash option.
y For best wash results, only wash small loads (less
than 8 lbs.) with the Cold Wash option.
DELAY WASH
Once you have selected the cycle and other settings,
press this button to delay the start of the wash cycle.
Each press of the button increases the delay time by 1
hour, for up to 19 hours. Once the desired delay time is
set, press the START/PAUSE button to start the delay
time.
NOTE:
If the START/PAUSE button is not pressed to
begin the delay time, the washer will automatically
shut off after five minutes and all cycle settings will
be lost.
CUSTOM PROGRAM (PGM)
Custom Program allows you to store a customized
wash cycle for future use. It allows you to save your
favorite temperature, spin speed, soil level, and other
options for a cycle, and then recall them at the touch of
a button. To create a Custom Program:
1. Press the POWER button to turn on the washer.
2. Turn the cycle selector knob to select the desired
cycle.
3. Press the cycle modifier button to change the
desired setting.
4. Press the cycle option button to add the desired
options.
5. Press and hold the Custom PGM button for 3
seconds.
TO RUN A CUSTOM PROGRAM:
1. Press the POWER button to turn on the washer.
2. Briefly press the Custom PGM button. The stored
settings will display.
3. Press the START/PAUSE button to start the cycle.
(Pressing any other button at this time will cancel the
Custom Program.)
NOTE:
You may only save one custom program at a
time. Pressing and holding the Custom PGM button
will overwrite any previously saved custom program.
TUB CLEAN
Use this cycle to clean the tub of your washing
machine. See the Care and Cleaning section for more
information.
MFL68267016_E_A5.indd 24 16. 11. 23. 오전 11:05
Loading ...
Loading ...
Loading ...