Loading ...
Loading ...
Loading ...
English - 24
Operating your French Door
Refrigerator
USING THE CONTROL PANEL
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
( 1 ) Freezer / Power Freeze (3sec)
The Freezer button serves two purposes:
- To set the Freezer to your desired
temperature.
- To turn the Power Freeze function on
and off.
1. To set the Freezer temperature, touch
the Freezer button.
You can set the temperature between
5°F (-15°C) and -8°F (-23°C).
2. Power Freeze function
Touch and hold this button for 3 seconds
to decrease the time needed to freeze
products in the Freezer.
It can be helpful if you need to quickly
freeze easily spoiled items or if the
temperature in the freezer has warmed
dramatically.
(For example, if the door was left open.)
When you use this function, the energy
consumption of the refrigerator will
increase. Remember to turn it off when
you don’t need it and return the freezer to
your original temperature setting.
This icon will light up when you activate
the Power Freeze function. Power Freeze
function generates cool air for 72 hours
continuously and it makes the inside of
the refrigerator cool faster.
When you have enough, just press and
hold the Freeze (Hold 3 sec for Power
Freeze) button again for 3 seconds to
cancel the Power Freeze function.
( 2 ) Alarm / Filter Reset (3sec)
The Alarm button serves two purposes:
- To turn the door open alarm on and off
- To reset the water filter life indicator.
1. Door Alarm Function
If the door alarm is set to On, an alarm
beeps if any refrigerator door is left open
for more than three minutes.
The beeping stops when you close the
door. The door alarm function is pre-set
to On in the factory.
You can turn it off by pressing and then
releasing the Alarm button.
You can turn it back on in the same
fashion.
The icon lights up when the function is
on. When the Door Alarm function is on
and the alarm sound is triggered, the
Door Alarm Icon will blink while the alarm
sounds.
2. Water Filter Life Indicator Function
After you replace the water filter, touch
and hold this button for 3 seconds to
reset the water filter life indicator.
When you reset the water filter life
indicator, the Filter icon on the panel turns
Off. The Filter icon will turn red to let you
know it is time to change the water filter
after six months (about 300 gallons).
Some areas have large amounts of lime
in their water, which causes the water
filter to clog more quickly. If this is the
case in your area, you will have to change
the filter more frequently than every six
months.
DA68-02954H (EN)-03-���.indd 24 2018. 2. 1. �� 3:48
Loading ...
Loading ...
Loading ...