Loading ...
Loading ...
Loading ...
VIZIO M190MV/M220MV User Manual
Version 3/16/2010 25
www.VIZIO.com
COMPUTER
Connecting a Home Theater System
If your sound system has a SPDIF (optical) digital audio input you can connect it to the OPTICAL
digital audio out on the back of your HDTV. This is active when receiving audio with the content
being viewed no matter which input is being used.
1. Connect one end of the optical cable to the optical connection on the Home Theater and
the other end to the OPTICAL jack on your HDTV.
2. Turn on the power to your HDTV and Home Theater.
Change the input on your Home Theater to optical. See your Home Theater user manual for more
information.
Connecting a Computer
1. Turn off the power to your HDTV and Computer.
2. Connect the VGA cable from your computer to the RGB PC jack on your HDTV.
3. Connect the 1/8-inch audio cable from your computer to the RGB PC Audio jack on your
HDTV. This step is optional and only needed to transmit audio from the computer through
the TV.
4. Turn on the power to your HDTV and computer.
5. Select RGB using the INPUT button on the remote control or side of your HDTV.
6. Set computer to a resolution supported by your HDTV. If your computer supports it, we
recommend 1360 x 1080 (M190MV) or 1920 x 1080 (M220MV). (See Preset PC
Resolutions.)
Note: Refer to your Computer user manual for more information about the video output
requirements.
Loading ...
Loading ...
Loading ...