Loading ...
Loading ...
Loading ...
50
ENGLISH
5
Press the “ ” button to start a co ee brewing cycle.
6
Wait until the machine automatically ends the dispensing process.
7
Press the “ ” button to turn o the machine, and let the solution take
e ect for approximately 15 minutes. Empty the container and put it
back.
8
Turn on the machine and wait until the rinse cycle is completed.
9
Remove the co ee ground drawer and open the service door. Remove
the co ee residues drawer and then the brew group.
10
Wash the brew group thoroughly with fresh water.
11
After rinsing the brew group, insert it again in its seat until it locks into
place (see “Weekly cleaning of the brew group” chapter). Insert the
co ee residues drawer and the co ee ground drawer. Close the service
door.
12
Press the “ ” button to select the pre-ground co ee function. Do not
add co ee to the pre-ground co ee department.
13
Press the “ ” button to start a co ee brewing cycle.
14
Repeat steps 12-13 twice. Empty the container.
15
To clean the drip tray, place “Co ee Oil Remover” tablet inside and ll it
up to 2/3rds full with hot water. Let the cleaning solution take e ect for
about 30 minutes, then rinse thoroughly.
Green
Loading ...
Loading ...
Loading ...