Whirlpool UDT555SAHP - 24 Inch Fully Integrated Panel Ready Dishwasher

User Manual - Page 14

For UDT555SAHP.

PDF File Manual, 72 pages, Read Online | Download pdf file

UDT555SAHP photo
Loading ...
Loading ...
Loading ...
14
Dishwasher Features
AnyWare™ Silverware Basket
The AnyWare™ silverware basket can be hung on the door, the
bottom rack, or placed inside the bottom rack.
Door position Rack position Rack position side
To open the AnyWare™ silverware basket:
To unlock, grasp the front panel, pull up, and rotate 90° as shown.
Make sure the front panel is up all the way before rotating. To unlock
and rotate the front panel, grasp the front panel as shown and pull it
up and out.
PUSH
NOTE: Be sure the front panel of the silverware basket is
completely locked into place before pulling out the bottom rack
and before closing the dishwasher door.
To remove the basket from the door:
1. Grasp the silverware basket by the handle. Slide it toward the
top of the door.
2. Lift the basket off the holding buttons.
To replace the basket in the door:
3. Slide the basket toward the bottom of the door until it locks into
place.
Cup Shelves
Fold down the extra shelf on the left-hand
or right-hand side of the top rack to hold
additional cups, stemware, or long items
such as utensils and spatulas. For best
results on cups, stagger the spacing so
that the cups on the shelf are not directly
above the cups below.
Fold-Down Tines
The row of tines on the left-hand
and right-hand sides of the upper,
or in the back of lower rack can
be adjusted to make room for a
variety of dishes.
To adjust the fold-down tines:
1. Grasp the tip of the tine that is
in the tine holder.
2. Gently push the tine out of the
holder.
3. Lay the tines down, toward the
center of the rack.
EZ-2-Lift™ Top Rack Adjuster
You can raise or lower the
top rack to t tall items in
either the top or bottom rack.
Adjusters are located on
each side of the top rack.
To raise the rack:
Press both rack adjuster
thumb levers and lift the rack
until it is in the Up position
and level.
To lower the rack:
Press both rack adjusters thumb levers and slide the rack to its
Down position and level.
NOTE: The top rack must be level.
Easy-to-Remove Third Level Rack (on some models)
If additional space is
needed in the upper
rack, the third level
rack can easily be
removed.
To remove, fully
extend rack until it
stops. Then, open the
track stops on each
side and slide the rack
out to remove.
Low-prole items,
such as serving
utensils and
silverware, may be
loaded on the third
level rack.
A. Track stop B. Track
Loading ...
Loading ...
Loading ...