Loading ...
Loading ...
Loading ...
12
* For discolorations or deposits that persist, use a non-scratching household
cleanser or stainless steel polishing powder with a little water and a soft
cloth.
* For stubborn cases use a plastic scouring pad or soft bristle brush together
with cleanser and water. Rub lightly in direction of polishing lines or “grind”
of the aluminum finish. Avoid using too much pressure that may mar the
surface.
* Do not allow deposits to remain for long periods of time.
* Do not use ordinary steel wool or steel brushes. Small bits of steel may
adhere to the surface causing rust.
* Do not allow salt solutions, disinfectants, bleaches, or cleaning compounds
to remain in contact with aluminum finish for extended periods. Many of
these compounds contain chemicals that may be harmful. Rinse with water
after exposure and wipe dry with a clean cloth.
* Painted surfaces should be cleaned with warm water and mild detergent
only.
TROUBLE SHOOTING
In case if the Cooker Hood is not working or working improperly,
before calling the after sales service, switch off the appliance, unplug
the power supply and refer to the guide below to determine the
problem
S.No.
Status
Reasons
Solutions
1
Lamp doesn’t
work
Power supply not
connected
Check if the power
cord is properly
connected or not
Lamp is damaged
Call consumer
service for support
2
Hood gives out
loud noise
Filter not properly
fitted
Remove and refit
the filters in its
place
Loading ...