Loading ...
Loading ...
Loading ...
9
4. Attach an adequate length of φ160mm round duct to the air outlet
adapter. Let the exhaust run for a minimum of 1 meter in Straight line in
between bends / elbows for better efficiency.
5. The air must not be discharge into a flue that is used for exhausting
fumes from appliances burning gas or other fuels" "Regulations
concerning the discharge of air have to be fulfilled.
6. Install a roof/wall cap. Connect round metal ductwork to cap and
work back towards hood location. Use duct tape to seal the joints
between ductwork sections.
Electrical Connection
* Electrical wiring must be done by a qualified person(s) in accordance with
all applicable codes and standards. Turn off electrical power at service
entrance before wiring.
* If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
* Do not use the plug and an extension cord other than the ones initially
supplied with the hood.
* The earthing of this hood is compulsory. Do not remove ground prong of
the plug.
OPERATION OF CONTROLS
FUNCTION KEYS:
A= Timer (automatic shut off)
B= Turn on at Speed 1 / adjust / switch off
C= digital display screen (showing timer and speed)
D= Turn on at Speed 3 / adjust / switch off
Loading ...
Loading ...
Loading ...