Loading ...
Loading ...
Loading ...
10
E= Light
When key A is being pressed, digital display screen will show "15 minutes"
for timer whereas the minutes can be adjusted by pressing "+" or "-" on key
B and D. When the first speed is on, pressing key A once to switch off, the
digital display will shows "00" on the screen
When key B is being pressed, it shows "F1" on the digital display screen at
the same time first speed is on. By pressing key B again to switch off, the
digital display will show "00" on the screen.
When key D is being pressed, it shows "F3" on the digital display screen at
the same time the third speed is on. By pressing key D again to switch off,
the digital display will show "00" on the screen.
The second speed F2 can be adjusted by pressing key B or D. When key E is
being pressed, the light will on, by pressing key E again is to switch off the
light.
If the motor and light are operating together or only the motor is working,
pressing key A, automatic switch off timer mode will get on. In other word
the unit will delay 15 minutes to turn off the motor and the light. To press
key B or key D is to adjust the time, whereas to press key A again is to stop
the timer.
MAINTENANCE
Switch off or unplug the appliance from the mains supply
before carrying out any maintenance work.
GREASE FILTER
* The grease filters should be cleaned frequently (every two months
of operation, or more frequently for heavy use). Use a warm
detergent solution.
* Grease filters are washable.
1. Remove the grease filter by pressing the latch on the filter (Fig5).
This will disengage the filter from the hood. Tilt the filter
downward and remove.
2. Wash the filters, taking care not to bend them. Allow them to be
dry before refitting.
3. To install the grease filter, press the latch on the filter again.
Loading ...
Loading ...
Loading ...