Loading ...
Loading ...
Loading ...
18_ setting up
LEVELLING THE REFRIGERATOR
If the front of the appliance is slightly higher than
the rear, the door can be opened and closed more
easily.
Case 1) The appliance tilts down to the left.
Turn the left adjusting leg in the direction of the
arrow until the appliance is level.
Case 2) The appliance tilts down to the right.
Turn the right adjusting leg in the direction of the
arrow until the appliance is level.
< Case2 >
< Case1 >
INSTALLING THE HANDLES
(APPLICABLE MODELS ONLY)
The handles are included in the product
package.
1. Align each screw hole of the handle to the
corresponding screw hole of the door.
Then, insert the provided screws (x2) and use a
Phillips screwdriver to tighten them.
2. Insert the Cap-Handle Screws (x2) into each
handle hole on both sides.
Cap-Handle
screw
3. Repeat the steps above to install the handle on
the other freezer or fridge door.
4. Insert the Cap Screws (x2) into the door holes
of the opposite side of the door where no
handle is installed.
Cap screw
Use caution when installing the handle.
The door may be scratched.
CAUTION
DA68-02833A (EN)-19.indd 18 2018. 1. 31. �� 9:55
Loading ...
Loading ...
Loading ...