Loading ...
Loading ...
Loading ...
13.1 Technical data
Dimensions
Height 894 - 912 mm
Width 599 mm
Depth 600 mm
Top oven capacity 40 l
Main oven capacity 79 l
13.2 Location of the appliance
You can install your freestanding
appliance with cabinets on one or two
sides and in the corner.
A
A
B
Minimum distances
Dimension mm
A 2
B 685
13.3 Levelling of the appliance
Use small feet on the bottom of appliance
to set the appliance top surface level with
other surfaces.
13.4 Anti-tilt protection
Adjust the appliance to the correct height
and put it in the correct area before you
attach the anti-tilt protection.
CAUTION!
Install the anti-tilt protection
to prevent the appliance from
falling under incorrect loads.
The anti-tilt protection only
works when the appliance is
put in a correct area.
The anti-tilt protection has two parts (A
+B). You can find the anti-tilt protection (B)
on the right or left side of the rear wall of
the appliance.
B
1. Install the anti-tilt protection (A) on the
wall.
Make sure that the wall is made of a
solid material. If not, you need to
make the wall sufficiently strong to
hold the weight.
Make sure that the surface behind the
appliance is smooth.
2. Put the appliance in the middle of the
space between the cupboards.
If the space is larger than the width of
the appliance, you must adjust the
side measurement.
3. Install the anti-tilt protection (A)
approximately 77 mm below the top
surface of the appliance and 50 mm
from the left or right side of the
appliance into the circular hole on the
bracket. Screw it into the wall.
ENGLISH
23
Loading ...
Loading ...
Loading ...