Loading ...
Loading ...
Loading ...
6
Installation
Electrical Requirements
The induction warmer must be properly grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock
by providing a safe path for the electric current. The induction warmer has a power cord with a 3-prong grounding plug, which must be
used in a compatible and properly grounded outlet. It is the owner’s responsibility to replace any 2-prong wall outlet with a properly
grounded 3-prong wall receptacle.
For your safety, never cut, remove, or disable the electrical (ground) connection from the plug. Never use an adapter plug or an
extension cord with the induction warmer.
WARNING
FIRE AND ELECTRICAL
SHOCK HAZARD
DO NOT use an extension cord with
this appliance. Such use may result
in fire, electrical shock, or other
personal injury.
WARNING
ELECTRICAL GROUNDING
INSTRUCTIONS
This induction warmer must be electrically
grounded in accordance with local codes or, in
the absence of codes, with the National Electrical Code,
ANSI/NFPA-70 – latest edition. FOR PERSONAL
SAFETY, THIS APPLIANCE MUST BE PROPERLY
GROUNDED.
Mounting Magneeto
TM
II Control Panel
Use included screws. Do Not use alternate hardware.
Determine desired location for control panel on cabinet
underneath cooktop. Do not locate control panel on flat
cooktop surface. Always mount vertically, not
horizontally
2-7/8”
(7.4 cm)
2-1/4”
(5.7 cm)
Cutout Dimensions
3-13/16”
(9.7 cm)
2-1/2”
(6.3 cm)
1-3/16”
(3.0 cm)
3-1/2”
(8.9 cm)
• Insert Ethernet cable straight into RJ-45 connector
• Strain relieve cable so that connector entry remains straight
• Route and protect cable to prevent damage/pulling from
behind/under counter installations/storage
Loading ...
Loading ...
Loading ...