Loading ...
Loading ...
Loading ...
6 operating instructions Kelvinator Air Conditioning
Timer:
Press the "TIMER" keypad to activate the "auto start/auto
stop" timer function.
Auto start/stop programs can be set from 1/2-12 hours.
Each press of the "TIMER" keypad will increase the selected
time in 1/2 hour increments.
Dry:
In the Dry mode, the air conditioner will operate in the form
of a dehumidifier.
Since the conditioned space is a closed or sealed area, some
degree of cooling will continue.
Cooling:
The temperature settings are adjustable between 16°C
to 30°C . Cooling begins automatically when the room
temperature is 1°C above the set point, and stops when the
room temperature is 1°C below the set point. The fan will
not stop running.
Heat:
The temperature settings are adjustable between 16°C to
30°C in heating mode.
The default temperature setting is 24°C in heating mode and
the fan speed is optional.
Note: When heating stops, there may be a slight delay of 30
seconds for the fan motor to stop.
Auto:
For the cooling only models, after selecting "AUTO" by
pressing the "MODE" button, the air conditioner will select
the appropriate operating mode from "FAN", "COOL" or
"DRY" based upon the temperature difference between the
actual and desired room temperature.
For the cooling and heating models, after selecting "AUTO"
by pressing the "MODE" button, the air conditioner wioll
select the appropriate mode for cool, heat or dry based
upon the temperature difference between the actual and
desired room temperature. The default heating temperature
set point is 20°C, the default cooling temperature set point
is 25°C
Note: When activating the SLEEP mode when the unit is
in AUTO mode, the fan motor will change into LOW
speed mode immediately.
Operating instructions
Power:
Press the POWER keypad to turn the unit on/off.
(The TIMER keypad controls the auto start/stop feature
of the unit.)
Mode:
Press the "MODE" keypad to select the appropriate
operating mode. For the Reverse Cycle models (cooling &
heating), the mode selection will alternate between AUTO,
HEATING, COOLING, FAN and DRY. For the Cooling only
models, select the operating mode from AUTO, COOLING,
FAN and DRY. The green indicator light beside the "MODE"
option will illuminate, identifying the mode selected.
When using the DRY and AUTO mode, you cannot select a
fan speed. The fan motor operates on LOW speed in DRY
mode and on MED speed in AUTO mode.
Note: There is no green indicator light for "Auto" mode.
When you select "Auto " mode, a beep will sound
indicating this "MODE" option was selected.
+ Temperature settings up:
Press the
+ keypad to increase the set (operating)
temperature of the unit.
Each time the keypad is pressed the temperature increases
by 1°C with a maximum setting of 30°C
– Temperature settings down:
Press the
– keypad to decrease the set (operating)
temperature of the unit.
Each time the keypad is pressed the temperature decreases by
1°C with a maximum setting or minimum temperature of 16°C
Fan:
Press this keypad button to activate the appropriate fan
speed setting. Each press of the button will alternate through
LOW, MED, HIGH fan speed options. The green indicator
light beside the FAN speed option will illuminate, identifying
the fan speed selected.
Swing:
Press the "SWING" keypad to activate the automatic air
swing (oscillation) feature.
The green indicator light adjacent to the "SWING" keypad
will illuminate, identifying that the selected mode is
operational. The vertical louvers will oscillate back and
forth (side to side) automatically sweeping air around for
comfortable cooling/heating. To stop the air swing feature,
pressing the "SWING" keypad again, the green indicator
light adjacent to the keypad will go off.
When the SLEEP mode is activated, the green indicator light
beside the "SLEEP" function will illuminate.
Operating instructions
Loading ...
Loading ...
Loading ...