Loading ...
Loading ...
Loading ...
JVR0186X
Side support (if so equipped):
The side support feature allows you to
adjust the torso supports. Push the switch
inside
or outside to adjust the torso
area.
JVR0497X
Walk-in mechanism:
This feature makes it easier to get in and out
of the rear seat. Use the following procedure
when getting in and out of the rear seat.
If the sun visor is used, close it to the original
position before operating the walk-in fea-
ture.
1. Pull the seatback lever upward
to fold
the front seatback down. Make sure that
the front seatback is completely folded
down.
2. To slide the front seat forward, firmly
push the seatback switch
. The front
seat will move forward.
3. Get in or out of the vehicle.
4. To return the front seat to its original
position, raise the seatback and push the
seatback switch
again.
. To stop the seat sliding, push the seat-
back switch
again or operate the seat
sliding/lifter switches.
. The front passenger seat will stop re-
turning 6.5 in (165.8 mm) from its front-
most position to retain space for the rear
passenger.
. Depending on the seat position, the head
restraint may contact the roof headlining
during the walk-in operation. To prevent
possible interference, lower the seat
using the seat lifter switch.
Safety — Seats, seat belts and supplemental restraint system 1-5
Loading ...
Loading ...
Loading ...