Loading ...
Loading ...
Loading ...
9
Unpacking
• This product has been packaged to protect
it against transportation damage. Unpack
the appliance and remove all packaging
materials from around the rangehood. Keep
all packaging materials until you have made
sure your new rangehood is undamaged
and in good working order. The carton is
recyclable. Whenever possible, reuse the
carton and recycle it when disposing of
the packaging materials.
• Plastic wrapping can be a suffocation hazard
for babies and young children, so ensure all
packaging materials are out of their reach,
and dispose of them safely.
Important installation advice
WARNING!
• All electrical work associated with the
installation of this rangehood must be carried
out by a licensed electrician.
• This rangehood must be correctly installed by
a suitably qualifi ed person in strict accordance
with all applicable rules and regulations and
following the instructions in this manual.
• Do not try to install the rangehood yourself;
doing so will expose you to danger and void
the warranty. Improper installation, adjustment,
alteration or service can cause injury or
damage. We decline any responsibility for
injury or damage, to persons or property, as a
result of improper installation.
Before Installation:
7KLVSURGXFWKDVEHHQVXSSOLHGZLWK³GXWLQJ
PRGH´RQO\
%HIRUHLQVWDOODWLRQSOHDVHFRQILUPWKH
DGMXVWHUSRLQWLQJRQWKHGXFWLQJPRGH
Fig. 1
DUCTING RECIRCULATING
Fig. 2
External Outdoor Ducting Mode
Recommended wherever possible for optimal
performance
.
Remove the aluminium grease fi lters (Fig 6. on
page 10) from the underside of the rangehood.
Turn the switch in the centre of the motor
housing to “External Outside Ducting” position
(Fig. 1)
.
Clip in the plastic Front Vent Cover (part ID 7,
installation kit) over the vent holes on the front
of the rangehood.
.
Using the screws provided, install the Flu
Outlet Adaptor (Part ID 8, Installation kit)
to the top of the rangehood
.
Install the ducting pipe (not supplied) to the
outlet on the top of the rangehood and
vent to external air. It is recommended that
the ducting pipe is 120mm in diameter.
Fig.
White Plastic Cover
• When choosing the outdoor exhausting mode,
you can cover the front outlet (part ID ) with
the white plastic cover. (fig. ).
Fig.
Loading ...
Loading ...
Loading ...