Loading ...
Loading ...
Loading ...
Cleaning and maintenance
CAUTION!
• Before cleaning the rangehood or carrying out
maintenance, make sure the operation and
light switches are set to the “ 0 ” position and
the rangehood is disconnected from the power
supply.
• It is important to clean the filters regularly as oil
and food residues can become a fire hazard.
• Never use a steam cleaner to clean any part of
the rangehood.
Cleaning the rangehood exterior
Wipe the exterior surface of the rangehood
regularly using a soft cloth moistened with a
household solvent such as methylated spirits, or
with a sponge dampened with water and a little
non-abrasive liquid detergent.
Cleaning the grease filters
The aluminium mesh filters must be cleaned
regularly in order to prevent a fire hazard. Regular
cleaning also ensures better efficiency, as
grease and grime can impede the airflow. We
recommend cleaning them at least every two
months.
• Push in the plastic opening latch and take
the filters out of their frames (Fig. ).
Fig.
• Wash the filters thoroughly in warm, soapy
water, leaving them to soak for best results.
Rinse with warm water and leave to dry.
NOTE: The aluminum panels may slightly
change colour after several washes.
This is not a fault and no cause
for concern. It does not affect
performance and does not warrant
replacement of these parts.
Replacing a light bulb
If the light bulb needs replacing, proceed as
follows:
• Slide out the front panel for easier access and
remove the two aluminium mesh flters (Fig. 10).
• Carefully turn the bulb in anticlockwise
direction and remove (Fig. 11).
• Replace the bulb with one of the same type
and wattage (E14, 28W), as illustrated below
(Fig. 12).
OTHER USEFUL INFORMATION
Fig. 10
Fig. 11
Fig. 12
Loading ...
Loading ...
Loading ...