Philips HTS3264D/37 DVD home theater system

User Manual - Page 48

For HTS3264D/37.

PDF File Manual, 55 pages, Read Online | Download pdf file

HTS3264D/37 photo
Loading ...
Loading ...
Loading ...
48
English
Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this will
invalidate the warranty. Never open the system as there is a risk of electric shock.
If a fault occurs,  rst check the points listed below before taking the system for repair.
If you are unable to solve a problem by following these instructions, consult your dealer or
Philips for help.
No picture.
Completely distorted picture
or black/white picture.
No sound or distorted sound.
No surround sound effect
from the speakers.
The remote control does not
function properly.
Refer to your TVs manual for correct Video In
channel selection. Change the TV channel until you
see the DVD screen.
Press DISC to select disc mode.
If this happens when you turn on the progressive scan
feature, wait for 15 seconds for the auto recover or
switch to the default mode as below:
1) Press ç to open the disc tray.
2) Press on the remote control.
3) Press AUDIO SYNC on the remote control.
Check the video connection.
Sometimes a small amount of picture distortion may
appear. This is not a malfunction.
The disc is dirty. Clean the disc.
Adjust the volume.
Check the speaker connections and settings.
Make sure that the audio cables are connected and
press the correct source button (for example,
AUX (MP3 LINK)) to choose the device that you want
to hear through this unit.
Press SURROUND to select a correct surround
sound setting.
For playback of DTS track, press AUDIO SYNC to
select other audio track.
Make sure that the source you are playing is recorded
or broadcast in surround sound (Dolby Digital, etc).
Select the source you want to play (for example,
DISC or RADIO) before pressing the function button
(u, í / ë).
Reduce the distance between the remote control and
this unit.
Batteries are weak, replace the batteries.
Point the remote control directly toward the IR sensor.
Problem (General) Solution
1_hts3264D_37_eng4_final810.indd48 481_hts3264D_37_eng4_final810.indd48 48 2008-03-13 10:29:46 AM2008-03-13 10:29:46 AM
Loading ...
Loading ...
Loading ...