Loading ...
Loading ...
Loading ...
19
Universal Rear Speaker Kit
www.insigniaproducts.com
Specifications
Designs and specifications are subject to change without notice.
Legal notices
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply within the limits for a class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
My TV remote does not control my
speakers.
• If you are using a universal remote control, make sure that it is
programmed to your speakers. See Programming a universal
remote on page 10.
• Universal remotes will only control your speakers’ volume. Use the
controls on your speakers or the remote that came with it to
change the speakers’ audio source or sound mode.
• Make sure that you aim your universal remote at the remote
sensor on the front of your speakers.
• Make sure that you select the correct source on your universal
remote.
My s keep unpairing.
• Shorten the distance between the s.
Power output Left and right channel
Frequency response 20Hz-20 KHz
Dimensions (approx.)
(H x W x D)
Transmitter Module: 1.04 x 5.04 x 3.6 in. (26.5 x 128 x 91mm)
Receiver Module: 1.04 x 5.04 x 3.7 in. (26.5 x 128 x 93.4 mm)
Surround speaker Module: 3.6 x 3.5 x 4.15 in.(92 x 90 x 105.5 mm)
Weight Transmitter: 5.3 oz. (0.15 kg)
Receiver: 5.6 oz. (0.16 kg)
Battery 3V lithium battery (CR2025)
Inputs AUX (3.5 mm stereo audio) jack
Digital optical audio jack
PROBLEM POSSIBLE SOLUTIONS
NS-HURSK18_17-0287_MAN_V1_ENG.fm Page 19 Monday, May 22, 2017 8:46 AM
Loading ...
Loading ...
Loading ...