Loading ...
Loading ...
Loading ...
32
Safety Instructions
Operating Instructions
Care and CleaningTroubleshooting TipsConsumer Support
Using the self-cleaning lower oven.
The oven door must be closed and all controls must be set correctly for the cycle to work properly.
How to Delay the Start of Cleaning (available on JKP86 models only)
Press the SELF CLEAN pad.
Using the number pads, enter the
desired clean time.
Press the DELAY START pad. The
earliest start time you can set will
appear in the display.
Using the number pads, enter the
time of day you want the clean cycle
to start.
Press the START pad.
The door locks automatically. The display
will show the start time. It will not be
possible to open the oven door until
the temperature drops below the lock
temperature and the LOCKED or LOCKED
DOOR light goes off.
When the LOCKED or LOCKED DOOR light
goes off, you will be able to open the
door.
After a Clean Cycle
You may notice some white ash in the
oven. Wipe it up with a damp cloth after
the oven cools.
If white spots remain, remove them with a
soap-filled steel wool pad and rinse thoroughly
with a vinegar and water mixture.
These deposits are usually a salt
residue that cannot be removed by
the clean cycle.
If the oven is not clean after one clean
cycle, repeat the cycle.
■ You cannot set the oven for cooking
until the oven is cool enough for the
door to unlock.
■ While the oven is self-cleaning, you
can press the CLOCK pad to display
the time of day. To return to the
clean countdown, press the COOKING
TIME pad.
■ If the shelves become hard to slide,
apply a small amount of vegetable oil
or cooking oil to a paper towel and
wipe the edges of the shelves with the
paper towel.
Loading ...
Loading ...
Loading ...