Loading ...
Loading ...
Loading ...
quired for operation of the onboard electron‐
ics.
With a discharged vehicle battery, no operation
of the vehicle is possible.
Place vehicle in service
To place the vehicle in service, charge as
usual.
If there is no possibility of charging on site,
contact the service center.
Charging vehicle with a discharged
vehicle battery
1.
Unlock the vehicle, if needed, using the
integrated key, refer to page 38.
2. Secure the vehicle against rolling.
3. Connect either a Level 1 or Level 2 charg‐
ing cable to the household socket or the
port on the charging station.
4. Attach charging cable corresponding to
the charging socket connection.
Charging is started. The charging status is
not displayed. Do not open vehicle during
this time.
After several minutes, the vehicle is slightly
charged. The onboard electronics are ready
again. It is again possible to open the vehicle.
The charging status as well as the charging
state of the high-voltage battery can be dis‐
played again.
If the vehicle battery cannot be charged, con‐
tact the service center.
Seite 157
Charging vehicle Mobility
157
Online Edition for Part no. 01 40 2 960 891 - II/15
Loading ...
Loading ...
Loading ...