Loading ...
Loading ...
Loading ...
4. Set rate begin. Turn the controller until the
desired time is set and press the controller.
5. Set rate end. Turn the controller until the
desired time is set and press the controller.
Setting charging via a
Level 1 charging cable
Depending on the electrical mains, the vehicle
must be charged with a different charging cur‐
rent strength, refer to page 150.
1. "Settings"
2. "Charging"
3. "AC charging power:"
Settings are stored. When you change charg‐
ing locations you also might need to change
the setting for charging.
Set the charge current strength at other
household sockets to "Low".
Stopping charging process
The charging operation can be stopped at any
time by removing the charging cable and con‐
tinued at a later time by connecting the charg‐
ing cable in order to use other loads on the
power connection or to prevent simultaneous
high power from multiple loads.
The charging operation is interrupted when the
vehicle is unlocked and automatically resumed
after a brief time or when it is locked.
Continue charging operation
If the charging operation is interrupted, e.g.,
through a temporary power failure, the charg‐
ing operation is automatically continued after
the interruption.
Terminating charging process
1.
Removing the charging cable from the ve‐
hicle, refer to page 152.
2. Stow the charging cable as required.
3. Close the charging port flap.
4. Lock vehicle if it is unlocked.
Displays in the instrument
cluster
The charging state indicator light, refer to
page 77, shows the charging state of the high-
voltage battery in the instrument cluster, if op‐
erating readiness is switched on. If all seg‐
ments are filled, the high-voltage battery is
fully charged.
Even if no segments are filled, the high-voltage
system is still under high voltage.
Information regarding the charging process are
shown on the charging screen, refer to
page 76.
Display Meaning
Blue plug: charging process active
or completed.
White plug: charging interruption.
Running light: animated with active
charging operation.
End of charging time or set depar‐
ture time.
Charging progress bar.
Indicator in blue: charged electrical
range.
Indicator in white: maximum electri‐
cal range.
White clock: departure time set.
Blue plug: charging process active
or completed.
White plug: charging interruption.
Climate control activated at depar‐
ture time.
Flashing: ventilation active.
Seite 155
Charging vehicle Mobility
155
Online Edition for Part no. 01 40 2 960 891 - II/15
Loading ...
Loading ...
Loading ...