Loading ...
Loading ...
Loading ...
13
SETTING OVEN CONTROLS
Setting the Clock
The set clock control is used to set the clock. The clock may
be set for 12 or 24 hours display operation. The clock is
preset at the factory for 12 hour display. When the oven is
first plugged in, or when the power supply to the oven has
been interrupted, the timer in the display will flash.
To set the clock (example below for 1:30):
1. Press Set Clock. CLO will appear in the display.
2. Press 1 3 0 on the keypad to set the time of day to 1:30.
CLO will stay in the display.
3. Press START. CLO will disappear and the clock will
start.
Setting Control for Silent Operation
Delay Start and Self Clean keys control the silent control
operation feature. The silent control operation feature
allows the oven control to be operated without sounds or
beeps whenever necessary. If desired the control can be
programmed for silent operation and later returned to
operating with all the normal sounds and beeps.
To change control from normal sound operation to
silent control operation:
1. To set oven for normal or silent operation, press and
hold Delay Start. -- -- will appear and DELAY will flash
in the display. After 6 seconds bEEP On or bEEP OFF
will appear in the display.
2. Press Self Clean to switch between normal sound
operation and silent operation mode. The display will
show either bEEP On or bEEP OFF. If bEEP On
appears, the control will operate with normal sounds
and beeps. If bEEP OFF appears, the control is in the
silent operation mode.
3. Press START to accept the change or press OFF to
reject the change.
Setting 12 or 24 Hour Time of Day Display
1. Press and hold set clock for 6 seconds. CLO will
appear in the display.
2. Continue holding the key until 12Hr dAY or 24Hr dAY
appears in the display and the control beeps once.
3. Press Self Clean to switch between the 12 and 24 hour
time of day display. The display will show either 12Hr
dAY or 24Hr dAY.
4. Press START to accept the change or press OFF to
reject the change.
5. Reset the correct time as described in this section. If the
24 hour time of day mode was chosen, the clock will
display time from 0:00 through 23:59 hours.
Setting Continuous Bake or 12 Hour Energy
Saving
The Timer On-Off and Self Clean keys control the contin-
uous bake or 12 hour energy saving features. The oven
control has a factory preset 12 Hour Energy Saving feature
that shuts off the oven if the oven control is left on for more
than 12 hours. The oven can be programmed to override
this feature for Continuous Baking.
To set the control for continuous bake or 12 hour
energy saving:
1. Press and hold Timer On-Off for 5 seconds. 12Hr OFF
or StAY On will appear in the display and the control will
beep once.
2. Press Self Clean to switch between the 12 hour energy
saving and continuous bake features.
3. Press START to accept the change (display will return
to time of day) or press OFF to reject the change.
12Hr OFF indicates the control is set for the 12 hour energy
saving mode. StAY On indicates the control is set for the
continuous bake feature.
Loading ...
Loading ...
Loading ...