Loading ...
Loading ...
Loading ...
en-us Operating the Dishwasher
34
Changing the wash cycle
When the Start button ( has been
pressed, the wash cycle cannot be
changed. The only way a wash cycle
can be changed is by terminating the
wash cycle (Reset).
Child Lock (panel lock)
The child lock will lock the panel
while the dishwasher is in operation
to prevent that a wash cycle is
interrupted unintenionally (e.g. by
children).
To set the panel lock:
1.
Start the desired wash cycle.
2.
Hold down the button with the /
symbol over it for approximately
3 seconds until the display reads
’–.
The panel lock is active.
’– will be indicated now if any button
is pressed and the program will not
be reset.
To deactivate the panel lock hold
down the button with the / over it for
approximately 3 seconds until the
display no longer reads ’–.
The panel lock is deactivated
automatically when the wash cycle is
completed. In case of a power
outage the panel lock will remain
active. The panel lock has to be
activated with each new wash cycle.
Intensive drying
The final rinse uses a higher
temperature which improves the
drying result. The cycle time and
energy usage may be increased.
(Caution if utensils are delicate!)
This feature has two settings:
1.
Press the On/Off button (.
2.
Hold down function key # and
press Start button P until the
display 8 indicates š:x (x can
be any number).
3.
Release both buttons.
4.
Press function key # until the
display 8 indicates the factory
set value š:‹‹.
5.
Press function key 3 to switch
the intensive drying feature on
š:‹‚ or off š:‹‹.
6.
Press Start button P to save
setting.
š:‹‹ Off
š:‹‚ On
Loading ...
Loading ...
Loading ...