Loading ...
Loading ...
Loading ...
207
uuOperating the Switches Around the Steering WheeluDriving Position Memory System
*
Controls
1. Set the power mode to ON. Adjust the
driver’s seat to the desired position.
2. Press the SET button.
u You will hear the beeper, and the
memory button indicator light will blink.
3. Press the memory button
(1 or (2 within
five seconds of pressing the SET button.
u Once the seat position has been
memorized, the indicator light on the
button you pressed stays on and you will
hear two beeps.
1. Put the transmission into
(P.
2. Apply the parking brake.
3. Press a memory button (
(1 or (2).
u You will hear a beep, and the indicator
light will blink.
The seat will automatically move to the
memorized position. When it has finished
moving, you will hear a beep, and the
indicator light stays on.
■
Storing a Position in Memory
1Storing a Position in Memory
After you press the SET button, the storing operation
will be canceled when:
•
You do not press the memory button within five
seconds.
•
You readjust the seat position before the two
beeps.
•
You set the power mode to any position except
ON.
Memory
Button 1
Memory
Button 2
SET Button
■
Recalling the Stored Position
1Recalling the Stored Position
The seat will stop moving if:
•
The vehicle speed is above 2 mph (3 km/h).
•
You press the SET button or memory button (1 or
(2.
•
You adjust the seat position.
Memory
Button 1
Memory
Button 2
Loading ...
Loading ...
Loading ...