Loading ...
Loading ...
Loading ...
En-8
3
Clean the air outlet and fan.
• Wipe with a soft dry cloth.
Clean the fan.
• Use the QUICK CLEAN KIT (option).
Parts Number MAC-093SS-E
• Refer to
the instructions described in the
QUICK CLEAN KIT for details.
Instructions:
Air outlet and Fan (before cleaning, make sure that the fan is stopped)
CLEANING
1
Turn the horizontal vanes down-
ward. Then, remove the upper
vane as shown in ➀ and
➁.
• Repeat ➀ and ➁ for the lower vane.
2
Swing out the two vertical vanes
one by one.
4
Put the vertical vanes back to their
original positions correctly one by
one, into their respective guide.
• Push the vanes until they click into place.
5
Install the horizontal vanes by
following the removal procedure
in reverse.
• If the horizontal vanes are not installed
correctly, all LED lamps blink when power
is turned on.
• Switch off the power supply or turn off the breaker before cleaning.
• Be careful not to touch the metal parts with your hands.
• Do not use benzine, thinner, polishing powder, or insecticide.
• Use only diluted mild detergents.
• Do not expose parts to direct sunlight, heat, or re to dry.
• Do not use water hotter than 50°C.
Note:
Do not apply excessive force to the fan or fan guard.
Front panel
Hole
Hinge
Upper
vane
Unlock
Air lter (Nano platinum lter)
• Clean every 2 weeks
• Remove dirt by a vacuum cleaner, or rinse with water.
• After washing with water, dry it well in shade.
What is “Nano platinum lter” ?
Nano platinum is a ceramic particle that includes a platinum nanoparticle.
The particles are incorporated into the lter material, which results in pro-
viding
semi-permanent antibacterial and deodorizing characteristics for the
lter. Nano platinum surpasses the catechin (a bioavonoid that is found
in green tea) in performance. Nano platinum lter uses this compound not
only
to improve air quality but also to eliminate bacteria and viruses. This air
lter has a semi-permanent lasting effect even after washing it with water.
Air cleaning lter
(Electrostatic anti-allergy enzyme lter)
Every 3 months:
• Remove dirt by a vacuum cleaner.
When dirt cannot be removed by vacuum cleaning:
•
Soak the lter and its frame in lukewarm water before rinsing it.
•
After washing, dry it well in shade.
Every year:
• Replace it with a new air cleaning lter for best performance.
• Parts Number
MAC-2310FT
1. Lift the front panel until a “click” is heard.
2.
Hold the hinges and pull to remove as shown in the left illustration.
•
Wipe with a soft dry cloth or rinse it with water.
• Do not soak it in water for more than two hours.
• Dry it well in shade.
3. Install the front panel by following the removal procedure in reverse. Close the
front panel securely and press the positions indicated by the arrows.
Guide (catch)
Important
• Clean the lters regularly for best performance and to
reduce power consumption.
• Dirty lters cause condensation in the air conditioner
which will contribute to the growth of fungi such as
mold. It is therefore recommended to clean air lters
every 2 weeks.
Heat exchanger
• Wear gloves to protect your hands.
• Use the QUICK CLEAN KIT
(option).
Parts Number MAC-093SS-E
• Refer t
o the instructions described in the
QUICK CLEAN KIT for details.
JG79A789H01_en.indd 8 2013/07/18 11:12:51
Loading ...
Loading ...
Loading ...