User Manual - Page 6

For MSZ-GE80VAD. Also, The document are for others Mitsubishi models: MSZ-GE60VAD, MSZ-GE71VAD

Loading ...
Loading ...
Loading ...
En-5
● OPERATING INSTRUCTIONS ●
FAN SPEED AND
AIRFLOW DIRECTION ADJUSTMENT
Press to select fan speed. Each press changes
fan speed in the following order:
• Two short beeps are heard from the indoor unit when set to AUTO.
Use higher fan speed to cool/heat the room quicker. It is recommended
to lower the fan speed once the room is cool/warm.
• Use lower fan speed for quiet operation.
Note:
Multi system operation
When several indoor units are operated simultaneously by one outdoor unit for
heating operation, the temperature of the airow may be low. In this case, it is
recommended
to set the fan speed to AUTO.
Press to select airow direction. Each press
changes airow direction in the following order:
Two short beeps are heard from the indoor unit when set to AUTO.
Press to select horizontal airow direction. Each
press changes airow direction in the following order:
Airflow direction
(AUTO) .........The vane is set to the most efcient airow direction. COOL/
DRY:horizontal position. HEAT:position (5).
(Manual) .......For efficient air conditioning, select the upper position for
COOL/DRY, and the lower position for HEAT. If the lower
position is selected during COOL/DRY, the vane automatically
moves to the horizontal position after 0.5 to 1 hour to prevent
any condensation from dripping.
(Swing) .........The vane moves up and down intermittently.
(AUTO) (Silent) (Low) (Med.) (High) (Super High)
(AUTO) (1) (2) (3) (4) (5) (SWING)
(SWING)
LONG OPERATION
Press to start LONG operation.
Fan speed increases and the horizontal vane moves to the position for
LONG mode.
Air reaches to longer distance.
Press again to cancel LONG operation.
LONG operation is cancelled when the ON/OFF, VANE, or ECONO
COOL button is pressed.
Press
during COOL or HEAT mode Page 4 to
start POWERFUL operation.
Fan speed : Exclusive speed for POWERFUL mode
Horizontal vane : Set position, or downward airflow position during
AUTO setting
Temperature cannot be set during POWERFUL operation.
Press again to cancel POWERFUL operation.
POWERFUL operation also is cancelled automatically in 15 min-
utes, or when the ON/OFF, FAN, ECONO COOL, or i-save button is
pressed.
POWERFUL OPERATION
JG79A789H01_en.indd 5 2013/07/18 11:12:46
Loading ...
Loading ...
Loading ...