Loading ...
Loading ...
Loading ...
49MAINTENANCE
ENGLISH
Replacing Filter Type LT700P
(LSFXC2476*/LSFD2491**)
1
Remove the old water filter.
Lower or remove the top left shelf to allow the
water filter to rotate all the way down.
Pinch the sides to open the water filter cover.
NOTE
• Replacing the water filter causes a small amount of
water (around 1 oz. or 25 cc) to drain.
• Wrap a cloth around the front end of the water filter
cover to collect any leaking water. Hold the water
filter upright, once it is removed, to prevent any
remaining water from spilling out of the water filter.
2
Pull the water filter downward and pull out.
3
Replace with a new water filter.
Take the new water filter out of its packing and
remove the protective cover from the o-rings.
With the water filter tabs in the horizontal position,
push the new water filter into the manifold hole
until it stops.
4
Close the water filter cover. The cover will click
when closed correctly.
5
After the water filter is replaced, dispense 2.5
gallons of water (flush for approximately 5
minutes) to remove trapped air and contaminants
from the system.
NOTE
• Do not dispense the entire 2.5 gallon amount
continuously. Press and release the dispenser pad
for cycles of 30 seconds ON and 60 seconds OFF.
• Keep the water filter bypass plug. You MUST use
the water filter bypass plug when a replacement
water filter cartridge is not available.
6
After changing the filter, press and hold the
Water Filter button for three seconds to reset the
indicator light.
CAUTION
• DO NOT operate the refrigerator without a water
filter or water filter bypass plug installed.
NOTE
To purchase a replacement water filter:
• Visit your local dealer or distributor
• Search using "water filter" on lg.com
• Use replacement cartridge: ADQ360061**
For further assistance, call:
1-800-243-0000 (USA)
1-888-542-2623 (Canada)
Loading ...
Loading ...
Loading ...