
SCB 7000WH
EN
FOOD CHOPPER
Translation of the original manual

SCB 7000WH

A
MAX
1
2
3
4
5
6
7
8
B
1
2

C
1
3
Max.
20 s
4
6
5
9
8
10
13
11
MAX
MAX
MAX
MAX
MAX
MAX
MAX
MAX
MAX
MAX MAX
2
12
7
M
I
N
M
A
X

D
MAX
MAX
max. 55 °C
MAX
MAX
MAX
MAX
MAX
MAX
MAX
MAX
MAX
MAX
MAX
MAX
MAX

- 1 -
01/2025
2025, .
EN
Food Chopper
User Manual
Important Safety Instructions
READ CAREFULLY AND STORE FOR FUTURE USE.
General Warnings
• This appliance may be used by persons with physical,
sensory or mental impairments or by inexperienced
persons, if they are properly supervised or have been
informed about how to use of the product in a safe manner
and understand the potential dangers.
• This appliance is not to be used by children. Keep the
appliance and its power cord out of the reach of children.
• Children must not play with the appliance.
• This appliance is intended for domestic use only.
The appliance is not intended for use in premises such as:
– kitchenettes in shops, offices and other work
environments;
– agricultural farms;
– hotels, motels and other residential environments;
– bed and breakfast establishments.
• This appliance is not intended for commercial use in order
to conduct business.
• If the power cord is damaged, have it replaced in a
professional service centre in order to prevent a dangerous
situation. It is forbidden to use the appliance with the
power cord damaged.
FOOD CHOPPER

- 2 -
01/2025
2025, .
• To avoid injury from the chopping blades, take extra care
when handling the blade unit, especially when assembling
the appliance, removing the blade unit from the container,
emptying the container and during cleaning. Do not touch
the chopping blades.
• General warning for food preparation andprocessing
machines andblenders: Take special care if you pour hot
liquid into the appliance container, as it may splash out of
the appliance due to sudden evaporation.
Warning:
Improper or unintended use can lead to injury.
• Food processing times and speed settings are listed
in thechapter QUICK GUIDE TO PROCESSING
INGREDIENTS.
• The maximum continuous operation time of the appliance
is 20 seconds. Allow the appliance to cool down for at
least 2 minutes before the next operating cycle. After
two 20-second operating cycles, allow the appliance to
cool down for 15 minutes. Do not exceed the maximum
operating time andobserve the cooling time of the
appliance.
Warning:
If you need to press down the food in the container,
use a suitable kitchen utensil such as a kitchen
spatula. Do not use your fingers to avoid being
injured by theblade unit. The chopping blades are
very sharp.

- 3 -
01/2025
2025, .
• Before replacing the accessories or accessible movable
parts, please turn the appliance off and disconnect it from
the power supply.
• Always disconnect the appliance from the power socket
if you are leaving it unattended and before assembly,
disassembly or cleaning.
• Clean the food contact surfaces of the appliance and its
accessories according to the instructions in the chapter
CLEANING AND MAINTENANCE.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Additional Important Safety Instructions forUse of the
Appliance
• Use the appliance and its accessories in accordance with the instructions in this manual.
• The appliance is designed to process food of solid consistency. Do not process liquids in it. Do not use the appliance for purposes other than those
for which it was designed.
• The appliance is intended for indoor use only. Do not use it in industrial surroundings or outdoors.
• It is forbidden to modify the surface of the appliance in any way, e.g. using self-adhesive foil, etc.
• Do not expose the appliance or its accessories to the outdoor environment, extreme temperatures, rapid temperature changes, direct sunlight or
excessive dust.
• Always place the appliance on a clean, flat, dry and stable surface. Do not place it on the edge of the table to prevent it from falling.
• Do not place the appliance or its accessories on or near an electric or gas hob. Keep it at a sufficient distance from open fire, heating elements
andother sources of heat. Do not place it or any part of it into the freezer.
• Do not place any items on the appliance or its power cord.
• Ensure that the power cord does not hang over the edge of the table or touch hot surfaces or sharp objects.
• Before connecting this appliance to a power socket, make sure the rated voltage stated on the product's rating label corresponds to the voltage in
your power socket.
• The use of an extension cable is not recommended.
• Before use, always make sure that no part of the appliance is damaged. Do not use the appliance if it is damaged in any way.
• Only use the appliance with original accessories from the manufacturer.
Warning:
The use of non-original accessories can lead to a dangerous situation.
• Prior to connecting the appliance to apower socket, make sure that the appliance is properly assembled according to the instructions in this
user'smanual.
• The appliance is equipped with a safety lock that will not allow it to start if the motor unit is not properly seated on the lid of the container.
• The appliance may vibrate during operation. Do not use the appliance without an anti-skid base.
• Do not overfill the appliance container. The maximum capacity of the food chopper container is indicated by the MAX mark.
• Before processing food in the appliance, remove nut shells, bones, hard fruit stones, etc.
• Do not process ingredients such as baking soda, baking powder, yeast, etc. in the appliance.
• This appliance is not intended for preparing dough, mashed potatoes or whipping egg whites, etc.
• To avoid damage to the blade unit, do not use the appliance to process hard ingredients such as cereals, coffee beans, nutmeg, frozen foods, ice
cubes, hard bread crusts, etc.
• Take extra care when handling hot liquids and food. Hot steam or splashes of hot liquids or food can cause scalding.
• The appliance container is temperature resistant up to 55 °C. Do not put food at higher temperatures into it. For added safety, allow hot foods to cool
to room temperature before placing them in the container.
• If you place hot food in the container, the surface will heat up. Avoid contact with heated surfaces.
• Do not place the lid on the container if hot food is inserted init. Wait until the food has cooled down to room temperature.

- 4 -
01/2025
2025, .
• Never process hot food. Allow hot foods to cool to room temperature before processing.
• Do not open the lid or remove the motor unit while the appliance is running.
• Do not turn the appliance on when empty. Improper use can adversely affect the life of the appliance.
• Do not leave the motor unit running empty. If food is sticking to the sides of the container and the blade unit is running empty, stop the appliance.
Disconnect the appliance from the power socket. Wait until the rotating parts come to a stop. Remove the motor unit and lid. Use a spatula to loosen
the food from the sides of the container. Do not release food with your hands to avoid injury from thechopping blade.
• After use, switch off and disconnect the appliance from the power socket. Wait for the rotating parts to stop before removing the motor unit from the
container lid. Carefully remove the blade unit from the container first andthen the food to avoid injury from thechopping blade.
• Unplug the appliance from the power socket by pulling the plug. Do not pull the power cord. Otherwise, damage to the power cable or the socket
may occur.
• Do not connect or disconnect the power cord plug to or from the power socket with wet hands.
• None of the components of this appliance are intended for use ina microwave or electric oven, etc.
• The appliance container is not designed forstoring food.
• To avoid the risk of electric shock, do not immerse the motor unit, power cord or power cord plug in water or any other liquid, or wash these parts
under running water.
• Do not use the appliance if it is not working properly, if the motor unit has been immersed in water or if it shows any signs of damage. Take it to an
authorised service centre for inspection or repair.
• Do not make any adjustments to the appliance. Do not disassemble the motor unit.
• To avoid a dangerous situation, never repair the appliance yourself. All repairs should be carried out by an authorised service centre. Tampering with
the appliance during the validity of the warranty may result in the loss of your legal rights regarding faulty performance or warranty for quality.
• Store the appliance in a dry and clean environment out of the reach of children and animals.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
EXPLANATION OF SYMBOLS PLACED ON THE PRODUCT OR INTHE ACCOMPANYING DOCUMENTATION
Product with protection class II
The product meets all the basic requirements of the applicable EU directives.
This symbol on products or original documents means that used electric or electronic products must not be added to ordinary municipal
waste.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

- 5 -
01/2025
2025, .
• Thank you for purchasing our SENCOR product; we hope it will serve
to your satisfaction.
• Prior to using this appliance, please read the user manual thoroughly,
even in cases when you are already familiar with the use of similar
types of appliances. Use the appliance only as described in this
user manual. Keep the manual for future reference. If you pass the
appliance on to another person, ensure that this user manual is
included.
• Carefully unpack the appliance and make sure not to discard any part
of the packaging material until you have found all its components. It
is recommended to keep the original packaging, packing material,
receipt and confirmation of the extent of the seller'sliability or warranty
certificate at least for the duration of the legal right of defective
performance or quality guarantee. When transporting the appliance,
we recommend packaging it again in the original box provided by the
manufacturer.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DESCRIPTION OF THE CHOPPER AND ITS ACCESSORIES (FIG. A)
A1 Power switch
A2 Speed regulator Min to Max
– low to high speed
A3 Motor unit
A4 Container lid
with acentral
andcircumferential seal
A5 2-piece blade unit with six
chopping blades
A6 Glass container with handles
– total volume 2.7 l, max.
filling capacity 1.5 l
A7 Centre pin
A8 Anti-skid base
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
THE PURPOSE OF USING THE CHOPPER
• The food chopper is designed for chopping foods such as fruit,
vegetables, semi-hard or hard cheeses, nuts, herbs or lean meat, and
for preparing fruit or vegetable purees or spreads.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BEFORE FIRST USE
• Take the appliance and its accessories out of the packaging materials.
• Wash the A6 glass container, A4 container lid, A5 blade unit and A8
anti-skid base thoroughly with warm water using afew drops of hand
dishwashing liquid. Then thoroughly rinse everything under running
water to remove any dishwashing detergent residue andwipe dry with
akitchen towel.
Warning:
When handling and cleaning the A5 blade unit, take
extra care not to cut yourself on the chopping blades.
Clean each part of the A5 blade unit separately
andhold it by the central part. The chopping blades
are very sharp. Do not touch them.
• Wipe the A3 motor unit with alightly damp cloth anddry with
akitchen towel.
Warning:
To avoid the risk of electric shock, do not immerse
the A3 motor unit, power cord or power cord plug in
water or any other liquid, or wash these parts under
running water.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ASSEMBLY AND DISASSEMBLY OF THE BLADE UNIT (FIG. B)
• The A5 blade unit consists of basic chopping blades, which are put
on the A7 centre pin on the bottom of the A6 container, andadditional
chopping blades. Additional chopping blades are attached to thebase
blades.
• Place the basic chopping blades on the table. Carefully slide the
auxiliary blade unit onto the central part of the basic blade unit. Hold
the basic blade unit from above by the central part andturn the
additional blade unit counterclockwise until it stops.
• In the opposite way, disassemble the A5 blade unit into its individual
parts. To remove the additional chopping blades, hold the basic
chopping blades from above by the central section. Carefully rotate
the central part of the additional chopping blades clockwise, slide the
additional blades upwards and remove them from the basic chopping
blades.
Warning:
When handling the A5 blade unit, take extra care
not to injure yourself on the chopping blades. The
chopping blades are very sharp. Do not touch them.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
USING THE CHOPPER (FIG. C)
• Check that the A3 motor unit is disconnected from the power socket.
• Place the A8 anti-skid base on aflat, dry and stable surface, e.g. on
akitchen worktop. Select alocation withinreach of the power socket.
• Insert the A6 container into the A8 anti-skid base. Place the A5
assembled blade unit on the A7 centre pin on the bottom of the A6
container.
• Prepare the food you will be processing. Cut them into cubes up to
2 cm in size or follow the chapter QUICK GUIDE TO PROCESSING
INGREDIENTS.
• Place the prepared food into the A6 container. When filling the A6
container, do not go above the MAX mark.
• Place the A4 lid on the A6 container so that it follows the
circumference of the A6 container. Push the A4 lid down so that it
seats around the entire perimeter on the A6 container.
• Place the A3 motor unit on the A4 lid. Make sure that the A3 motor
unit fits into the A4 lid and the shaft of the A5 blade unit fits into the
A3 motor unit.
Warning:
The safety lock will not allow the chopper to start if
the A3 motor unit is not properly located in the A4 lid.
• Connect the power cord plug to apower socket. Adjust the speed by
turning the A2 speed regulator. The groove marked on the A2 speed
regulator faces theset speed. Press the A1 switch to put the A3 motor
unit into operation. Hold the A6 container by the handle with one hand
during operation, especially when processing harder foods. Release
the A1 switch to stop the A3 motor unit.
• Forsome foods, it is advisable to use pulse switching, i.e. alternately
press andrelease the A1 switch and repeat this procedure until
the ingredients are processed. Recommended speed settings
and processing times are given in the chapter QUICK GUIDE TO
PROCESSING INGREDIENTS.
Warning:
The maximum continuous operation time of the
appliance is 20 seconds. Allow the appliance to cool
down for at least 2 minutes before the next operating
cycle. After two 20-second operating cycles, allow
the appliance to cool down for 15 minutes. Do not
exceed the maximum operating time andobserve the
cooling time of the appliance.
• Release the A1 switch to stop the operation of the A3 motor unit
whenever food gets stuck to the walls of the A6 container and the
A3 motor unit is running idle. Disconnect the A3 motor unit from the
power socket. Wait until the rotating parts come to astop. Remove
the A3 motor unit and A4 lid. Use aspatula to loosen the food from
EN
Food Chopper
User Manual

- 6 -
01/2025
2025, .
the walls of the A6 container. Do not use your hands to avoid injury from thechopping blade. Reassemble the chopper, connect it toawall socket
andcontinue processing the food.
• After use, disconnect the A3 motor unit from the power socket. Wait for the rotating parts to come to acomplete stop.
• Remove the A3 motor unit from the A4 lid. Remove the A4 lid from the A6 container.
• First remove the A5 blade unit from the A6 container andonly then remove the processed food.
Warning:
When handling the A5 blade unit, take extra care not to injure yourself on the chopping blades. The chopping blades are very
sharp. Do not touch them.
• After each use, properly clean the parts that have come into contact with food according to the instructions in the chapter CLEANING AND
MAINTENANCE.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
QUICK GUIDE TO PROCESSING INGREDIENTS
Ingredients | dishes Preparing the ingredients
before processing
Maximum amount per
dose
Speed setting Recommended chopping
time
Apple puree Peel the apples, remove the
cores, cut them into 2 cm
cubes andlet them stew
until soft.
600g Low to medium speed 10−15 s
Onion Peel the onion andcut it into
quarters.
For larger onions, cut the
quarters in half crosswise.
600g Medium speed 10−15 spulse switching
Walnuts Remove the nuts from the
shells.
450g Medium to high speed 20 s
Semi-hard cheeses Cut the cheese into 2 cm
cubes.
500g Medium to high speed 10−15 s
Hard cheeses Cut the cheese into 2 cm
cubes.
500g High speed 2× 20 s*
Hard pastry for
breadcrumbs
Cut the bread into 2 cm cubes. 140g (approx. 3 rolls) High speed 2× 20 s*pulse switching
Baby biscuits or cookies Break the biscuits or cookies
into smaller pieces.
150g High speed 2× 20 s*pulse switching
Lean meat Remove the bones from the
meat andcut 2 cm cubes.
600g Medium to high speed 20 s
Fresh herbs Cut the stems to alength
of 5 cm.
45g Low to medium speed 10 spulse switching
* Observe a2-minute break between operating cycles.
Note:
The Quick Guide to Processing Ingredients provides only
arepresentative list of ingredients.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CLEANING AND MAINTENANCE (Fig. D)
• Before any cleaning or maintenance work, the appliance must be
switched off and disconnected from the power socket. Disassemble
the appliance into its individual parts before cleaning. Wait for the
rotating parts to stop before dismantling. Be sure to disassemble the
A5 blade unit into its individual parts.
• Never use thinners, metal or other dish scourers or abrasive cleaners
for cleaning. The finish of the appliance and its accessories could be
damaged.
Warning:
To avoid the risk of electric shock, do not immerse
the A3 motor unit, power cord or power cord plug in
water or any other liquid, or wash these parts under
running water.
Warning:
When handling and cleaning the A5 blade unit,
take extra care not to cut yourself on the chopping
blades. The chopping blades are very sharp. Do not
touch them.
• Clean the appliance immediately after use. Do not store food in the A6
container or allow food remains to dry init. Dried food residues would
be more difficult to remove.
• Wash the A6 glass container, the lid of the A4 container and the A5
blade unit thoroughly with warm water using afew drops of hand
dishwashing liquid. Pay special attention to the cleaning of the central
andcircumferential sealing of the lid and the area underneath it. Do
not wash the A5 blade unit by immersing it in afoamed detergent
solution. When covering the chopping blades with foam, cleaning
could causeinjuries. Then thoroughly rinse everything under running
water to remove any dishwashing detergent residue andwipe dry with
akitchen towel.
• The A6 glass container can be washed inthe upper dishwasher
basket at temperatures up to 55°C. Other components of the
appliance are not dishwasher safe.
• Always check that the central andcircumferential seals of the A4 lid
are clean. Residual dirt could cause the seal to not perform its purpose
properly.
• Use alightly dampened cloth to clean the A3 motor unit. Wipe the
cleaned surface of the A3 motor unit dry with asoft cloth.

- 7 -
01/2025
2025, .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
STORAGE
• Clean the chopper and its accessories according to the instructions
in the chapter CLEANING AND MAINTENANCE. Before storing, the
chopper andits accessories must be clean anddry.
• Store the chopper and its accessories in aclean, dry place out of the
reach of children and pets.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TECHNICAL SPECIFICATIONS
Rated voltage range ..............................................................................220 − 240 V
Rated frequency .......................................................................................50 − 60 Hz
Rated input power ..............................................................................................800 W
Safety class (for electric shock protection) ............................................................ II
Noise level .........................................................................................................78 dB(A)
Total container volume ...........................................................................................2.7 l
Maximum filling capacity of the container ........................................................1.5 l
The declared noise emission level of the appliance is 78 dB(A), which
represents alevel Aof acoustic power with respect to areference acoustic
power of 1 pW.
Glossary of technical terms
Safety Class for Electric Shock Protection:
Class II – Electric shock protection is provided by double or heavy-duty
insulation.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INSTRUCTIONS AND INFORMATION ON DISPOSAL OF USED
PACKAGING MATERIAL
Dispose of used packaging material at the location designated by the
municipality for waste disposal.
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT
Used electrical andelectronic products must not be added to ordinary
municipal waste. For proper disposal and recycling of these products,
deliver them to designated collection points. Alternatively, in some
European Union states or other European countries the products can be
returned to the local retailer when buying an equivalent new product. By
properly disposing of this product, you help preserve valuable natural
resources and contribute to preventing potential negative impacts on the
environment and human health resulting from improper waste disposal.
For further details, contact your local authorities or the nearest collection
point. Fines may be imposed for improper disposal of this type of waste in
accordance with national regulations.
For Business Entities in European Union States
To dispose of electric or electronic equipment, request necessary
information from your retailer or supplier.
Disposal in Other Countries Outside the European Union
If you wish to dispose of this product, request the necessary information
about the correct disposal method from the local council or from your
retailer.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changes to text and technical parameters are reserved.

- 8 -
01/2025
2025, .
