STANDING DOUBLE FRYER
SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY,
OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT’S
SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH
AND YEAR OF PURCHASE IF PRODUCT HAS NO NUMBER)
OWNER’S MANUAL AND SAFETY INSTRUCTIONS
ITEM: 95514
FOR QUESTIONS PLEASE CALL OUR CUSTOMER SUPPORT: 909.628.0880 MON-FRI 9AM TO 3PM PST
1
IMPORTANT SAFETY INFORMATION
GENERAL SAFETY WARNINGS
Read these instructions for use carefully. Familiarise yourself with the appliance before connecting it to a gas
cylinder. Keep these instructions for future reference. This instruction manual contains important information
necessary for the proper assembly and safe use of the appliance. Follow all warnings and instructions when
using the appliance. If you have questions about assembly, operation, servicing or repair of this product,
please call Customer Service at 909.628.0880.
This appliance can produce carbon monoxide which has no odor.
CARBON MONOXIDE HAZARD
USE EXTREME CAUTION: Using it in an enclosed space can kill you.
NEVER use this appliance in an enclosed space such as a camper,tent, car or home.
EXPLOSION FIRE HAZARD
Never store propane near high heat, open ames, pilot lights, direct sunlight, other ignition sources or
where temperatures exceed 120degrees F (49°C).
Propane is heavier than air and can accumulate in low places. If you smell gas, leave the area immediately.
NEVER install or remove propane tank while outdoor stove is lighted, near ame, pilot lights, other ignition
sources or while outdoor stove is hot to touch.
During operation, this product can be a source of ignition. Never use the stove in spaces that contain or
may contain volatile or airborne combustibles, or products such as gasoline, solvents, paint thinner, dust
particles or unknown chemicals. Minimum clearances from combustible materials: 12 inches from the
sides & 48 inches from the top.
Provide adequate clearances around air openings into the combustion chamber.
This stove is a combustion appliance. All combustion appliances produce carbon monoxide (CO) during
the combustion process. This product is designed to produce extremely minute, non-hazardous amounts
of CO if used and maintained in accordance with all warnings and instructions. DO NOT block air ow into
or out of the stove.
Carbon Monoxide (CO) poisoning produces u-like symptoms, watery eyes, headaches, dizziness, fatigue
and possibly death. You can’t see it and you can’t smell it. It’s an invisible killer. If these symptoms are
present during operation of this product get fresh air immediately.
For outdoor use only.
NEVER use inside house, camper, tent, vehicle or other unventilated or enclosed areas. This stove
consumes air (oxygen). DO NOT use in unventilated or enclosed areas to avoid endangering your life.
2
IMPORTANT SAFETY INFORMATION
SAVE THESE WARNINGS
This product is fueled by propane gas. Propane gas is invisible, odorless,and ammable. An odorant is
normally added to help detect leaks and can be described as a “rotten egg” smell. The odorant can fade
over time so leaking gas is not always detectable by smell alone.
Propane gas is heavier than air and leaking propane will sink to the lowest level possible. It can ignite by
ignition sources including matches, lighters,sparks or open ames of any kind many feet away from the
original leak. Use only propane gas set up for vapor withdrawal.
Propane gas should be stored or used in compliance with local ordinances and codes or with ANSI/NFPA
58. Turn off propane when not in use.
CALIFORNIA PROPOSITION 65:WARNING: This fuel, and by products of combustion of this fuel,contain
chemicals known to the state of California to cause cancer,birth defects, or other reproductive harm.
Keep all connections and ttings clean. Inspect propane cylinder and stove propane connections for
damage before attaching.
During set up, check all connections and ttings for leaks using soapy water. Never use a ame. Bubbles
indicate a leak. Check that the connection is not cross-threaded and that it is tight. Perform another leak
check. If there is still a leak, remove the cylinder and contact Stark Tools for service or repairs.
Use as a cooking appliance only. NEVER alter in any way or use with any device or part not specically
designed and sold for this product.
Clean stove frequently to avoid grease accumulation and possible grease res.
NEVER leave stove unattended when hot or in use.
Keep out of reach of children.
Propane stoves and appliances are for outdoor use only. They should be placed on a at, level surface
that is sturdy and never near a wall or other obstruction.
Never store propane near high heat, open ames, pilot lights, direct sunlight, other ignition sources.
Minimum clearances from combustible materials: 12 inches from the sides and 48 inches from the top.
When cooking with oils, re’s can happen easily. Use extreme caution when using this stove and never
leave it unattended while in use.
Be sure to provide adequate clearances around air openings into the combustion chamber.
WARNING: Not for home or recreational vehicle use. We cannot foresee every use which may be
made of our products. Check with your local re safety authority if you have questions about use. Other
standards govern the use of fuel gases and heat producing products for specic uses. Your local authorities
can advise you about these.
• Never rell disposable cylinders.
• Use the preset regulator that came with the stove. Do not attempt to adjust.
During stove set-up, check all ttings for leaks using soapy water. Never use a ame.
PARTS
3
ASSEMBLY
110,000 BTU Cast Iron Burner
Removable oil tanks
Fryer Basker with carrying handles
Detachable leg for easier storage
Individual regulator controls
CSA Certicate Regulator
12” Thermometer
Step 1: Take out the burner ame
Step 2: Install four legs with screws
Step 3: Install the regulator gas hose
OPERATION
PREPARATION
Step 1: Follow “ASSEMBLY INSTRUCTION” to install burner and
assemble unit.
Step 2: Place stove on a level and stable surface.
Step 3: Make sure there is propane in the tank and it is turned OFF,
connect propane tank and stove with regulator and hose.
GAS LEAK TESTING
Step 1: Slowly open propane tank valve and check for leaks by
applying small amount of liquid soap and look for bubbles. If you
smell gas, TURN OFF propane valve immediately.
Step 2: Detach and reconnect the regulator on tank and test it again,
if leaking continues, please stop using and contact retailer/distributor
for help.
Step 3: If no gas is detected, please follow Part Three OPERATION.
GAS LEAK TESTING
Step 1: Hold a re lighter near the burner (Picture 2).
Step 2: Open regulator valve slowly (Put picture 3 to the “ON”
position).
Step 3: Put regulator knob to “OPEN” position (Picture 4), please
note that these two knobs are individual.
Step 4: If ame is not blue, please use installing tools to release
screws on the air damper(Picture 1), slowly adjust the air damper
up and down until burner has blue ame, some yellow tipping of the
ame is normal. Please screw the air damper tight when you gain
blue ame.
Step 5: Place stainless steel oil tank, fryer basket on burner for
cooking sh, chicken, res, onion rings, cheese curds and more!
(Picture 5)
Step 6: To gain necessary ame height and heat by rolling regulator.
(Picture 3).
Step 7: Use different temperature for cooking different foods, please
use the thermometer to test oil rst.
OPERATION
SUGGESTED COOKING TIMES
CLEANING
1. Allow burners and oil tank, baskets to cool completely.
2. Turn regulator (Picture 3&4) to the OFF/CLOSE position, remove propane hose from tank and stove.
3. Clean the stainless steel baskets, oil tank, cast iron burner thoroughly with soapy water and dry them with
dry and soft cloth.
4. When not in use, store the product in a place which is dry and out of direct sunlight.
OF NOTE
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT
HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS
QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR
DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD
BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE
BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE
ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER
INSTALLATION OF REPLACEMENT PARTS THERETO.
PLEASE READ THE FOLLOWING CAREFULLY
4
PRODUCT MADE IN CHINA
