Y2
FOOT MASSAGER
User Manual
MMF-01C
MMF-01S
1
Important safety instruction
When using an electrical appliance, basic precautions should always be
followed. Read all the instructions before using your Y2 foot massager.
DANGER
To reduce the risk of electric shock, always unplug this appliance from the
WARNING
1.
2. Do not operate under a blanket or pillow. Excessive heating can occur
3. Close supervision is necessary when this appliance is used by, or near
children, invalids, or disabled persons.
4. Use this appliance only for its intended use as described in this manual.
Do not use attachments which are not recommended by the MIKO.
5. Never operate this appliance if it has a damaged cord or plug if it is not
working properly, if it has been dropped or damaged,or dropped into water.
Return the appliance to MIKO service center for examination and repair.
6. Do not carry this appliance by cord or use cord as a handle.
7. Keep the cord away from heated surfaces.
8. Never operate the appliance with the air openings blocked. Keep the
air openings free from lint, hair, etc.
9. People who are heat-sensitive should pay attention to the unit when
the surface of the unit becomes hot.
10. Never drop or insert any object into any opening.
11. Do not use outdoors.
12. Do not operate where aerosol (spray) products are being used or where
oxygen is being administered.
13.
from outlet.
2
had surgery and/or are pregnant, consult your doctor before using the unit.
• Do not use the massager for any purpose other than massage.
• Keep out of reach of children.
• Do not use the massager if some parts are missing.
• Do not insert any metal objects inside the massager. This may result in
electric shock
• Do not stand inside the unit and apply excessive pressure to the
unit to overheat.
• Do not fall asleep using the massager.
• Do not cover the massager during operation, this may result in
overheating of the unit.
• Do not unplug the massager from the electrical outlet during operation.
unplug it from the outlet.
• Due to risk of electric shock do not place wet legs and feet inside the unit.
• Do not use the massager in the bathroom where you might come in
contact with water.
• Prior to use make sure that your voltage corresponds with the voltage of
the massager.
• Do not pull on the power cord when disconnecting from the electrical
outlet, hold the plug when disconnecting.
• Due to risk of electric shock, do not handle the plug and cord with wet
hands.
• Do not wrap cord around the unit as it may damage the cord and result in
• Do not place power cord under the massager or any heavy object.
• Do not
yourself. Contact MIKO for repair.
• If you experience any discomfort while using the massager, press the
• Some users may experience foot itching during and aer the massage.
This happens as a result of improved blood circulation and is ok.
3
WARNING:
Connect this appliance to a properly grounded outlet
only. See Grounding Instructions. STOP USING THE
!
Immediately discontinue use if any of the following occurs:
• If you experience severe or abnormal pain during the massage. Please
consult a doctor.
• If water was accidently spilled on the massager. This may cause
electrical shock.
• If you detect any malfunction during operation.
• If there is a power failure. Injury may occur when the power will be
restored unexpectedly.
• If there is lightning.
Save these instructions
FOR HOUSEHOLD USE ONLY
• Do not attempt to repair the appliance, contact MIKO service center.
• A short power supply cord is provided to reduce the hazards resulting
from entanglement or trapping over the long cord.
• Do not use extension cord as it can be pulled on by children causing
the unit to tip over.
GROUNDING INSTRUCTIONS
This product must be grounded. If it should malfunction or break down,
grounding provides a path of least resistance for electric current to reduce
the risk of electric shock. This product is equipped with a cord having an
equipment grounding conductor and a grounding plug. The plug must be
plugged into an appropriate outlet that is properly installed and grounded
in accordance with all local codes and ordinances.
4
Introduction
• Massages your feet with pressure and heating to help relax
• Works on the pressure points in your feet to relieve tightness and
soothe tired feet
• Ergonomically sleek appearance, light and portable
• With washable cloth cover
Kneading Massaging Heat Air Pressure
Control panel
Magnetic area for
remote control
Removable and
washable cloth cover
Includes
Adaptor x1
Wireless remote x2
5
(1)
Heat
(2)
Massage Mode
(3)
Foot Rollers / Air Pressure
(5) Massage Mode Indicator
(4)
Increase Pressure
(6) Decrease Pressure
(7)
LCD Display
(8)
Power
Control Panel
Wireless remote
ON/OFF
HEAT
(1) Power
(2) Heat
(4)
Increase Pressure
(5) Decrease Pressure
(3) Massage Mode
6
How to Operate Y 2
Please read all user instructions prior to operating your Y 2 massager.
IMPORTANT Do not stand inside the unit or apply excessive pressure to the massager.
This may significantly slow down or stop the motor, causing the unit to overheat.
1. Connect the adapter to the massager, then plug into the wall outlet.
There is a “beep” sound to indicate that the massager is ready for use.
2. Choose a comfortable chair of equal height. Place your legs into the slots and relax.
3. Press the power button to turn the massager on. The unit will beep one time
and start with L1(Pressure level 1) and the Heat Mode on.
The LCD will start a 15-minute countdown.
4. There are a total 5 pressure levels. L1 is the lowest and L5 is the highest.
Press the + button to increase the massage intensity and press the - button to decrease
the massage intensity.
5. You will feel the air pressure increasing and then releasing during the duration of the
massage. For optimal massage experience, you will feel the change of direction and
type of massage. During the massage, feel free to change levels by pressing + and -
buttons according to your comfort level.
6. The heat will gently rise up to the perfect temperature in a few minutes. You can turn
7.
Press on the power button to turn the massager off at any time.
The next time you turn it back on, it will start a new 15-minute massage session
with L1 and heat on.
8. Unplug the unit when done using the massager.
•
Before cleaning, always make sure to turn off the unit first, then unplug from the
electrical outlet.
• Do not use any abrasive cleaners when cleaning the unit.
• Use a dry cloth when cleaning the massager. Never use the damp cloth to clean the
control panel and massager unit.
• When not in use for a long time, store the massager in a dust and moisture free
environment with the cord coiled. Do not wrap the cord around the unit.
• Do not leave the unit under direct sunlight for an extended period of time.
• Do not store the massager unit near the heat source.
• If the massager unit malfunctions or breaks down, never try to repair it yourself, contact
MIKO service center.
Care and Storage
For all comments, questions or complaints reach out to us:
www.shopmiko.com
+1-866-201-9816
