User Manual
Semi-Automatic Espresso Machine
With Integrated Milk Cup
CEP 5464 DX
01M-8919383200-0625-01
EN
2 / EN
Semi-Automatic Espresso Machine/ User Manual
CONTENTS
ENGLISH 3-21
Please read this user manual first!
Dear Customer,
Thank you for selecting this Beko product. We hope that you get the best results from your product, which
has been manufactured to a high quality with state-of-the-art technology. Please read this entire user
manual and all other accompanying documents carefully before using the product and keep them as a
reference for future use. If you pass on the product to someone else, please give them the user manual
as well. Please take into consideration all warnings and information in the user manual.
Explanation of symbols
The following symbols are used in the various section of this manual:
Important information or useful hints about usage.
DANGER: This warning for dangerous situations with regard to life and property.
WARNING: This warning indicates potentially dangerous situations.
CAUTION: This warning indicates the potential for material damage.
Materials are suitable for food contact
4 / EN
1 Important instructions for safety and environment
Semi-Automatic Espresso Machine/ User Manual
This section includes the safety instructions that
will help providing protection against personal
injury and material loss risks. Failure to follow these
instructions invalidates the granted warranty.
1.1 Danger of electric current
Danger to life by electric current!
Contact with live wires or components could lead
to serious injury or even death!
Observe the following safety precautions to avoid
electric shocks:
•
Do not use the coffee machine if the connecting
cable or mains plug are damaged.
•
Before reusing the coffee machine, the mains
cable must be renewed by a qualified electrician.
•
Do not open the housing of the coffee machine.
Danger of electric shock if live connections are
touched and/or the electrical and mechanical
configuration is changed.
1.2 Danger of burning or scalding
Parts of the coffee machine can become very hot
during operation! Dispensed drinks and escaping
steam are very hot!
Observe the following safety precautions to avoid
burning/scalding yourself and/or others:
•
Do not touch either of the metal sleeves on both
coffee spouts.
•
Avoid direct contact of the skin with escaping
steam or hot rinsing, cleaning and descaling
water.
1.3 Fundamental safety precauti-
ons
Observe the following safety precautions to ensure
safe handling of the coffee machine:
•
Never play with packaging material. Risk of
suffocation.
•
Inspect the coffee machine for visible signs
of damage before use. Do not use a damaged
coffee machine.
•
If the supply cord is damaged, it must be replaced
by the manufacturer or its agent or similarly
qualified person in order to avoid hazard.
•
Repairs to the coffee machine must only be
carried out by an authorised specialist or by the
works customer service. Unqualified repairs can
lead to considerable danger for the user. They
will also void the warranty.
•
Repairs to the coffee machine during the
warranty period may only be carried out by
service centres authorised by the manufacturer,
otherwise the warranty will become void in the
event of subsequent damage.
•
Defective parts may only be replaced with
original spare parts. Only original spare parts
guarantee that the safety requirements are met.
•
Appliances can be used by persons with reduced
physical, sensory or mental capabilities or lack
of experience and knowledge if they have been
given supervision or instruction concerning use
of the appliance in a safe way and understand
the hazards involved.
•
This appliance can be used by children aged
from 8 years and above if they have been
given supervision or instruction concerning
use of the appliance in a safe way and if they
understand the hazards involved. Cleaning and
user maintenance shall not be made by children
unless they are older than 8 and supervised.
Keep the appliance and its cord out of reach of
children aged less than 8 years.
•
Children shall not play with the appliance.
•
This appliance is intended to be used in
household and similar applications such as:
-staff kitchen areas in shops, offices and other
working environments;
-farm houses;
-by clients in hotels, motels and other residential
environments;
-bed and breakfast type environments.
•
Protect the coffee machine against the effects
of weather such as rain, frost and direct sunlight.
Do not use the coffee machine outdoors.
•
The appliance must not be immersed.
•
Do not clean the coffee machine or accessories
in a dish washer.
•
Do not pour any other liquids apart from water or
place foodstuffs into the water tank.
5 / EN
1 Important instructions for safety and environment
Semi-Automatic Espresso Machine / User Manual
•
Do not fill the water tank beyond the maximum
mark (lower edge of the filling hole) (1.1 litres).
•
Only operate the machine when the waste
container, drip tray and the cup grate are fitted.
•
Do not pull the cable to remove the plug from the
mains socket or touch with wet hands.
•
Do not hold the coffee machine with the mains
cable.
•
Keep the appliance and its cord out of reach of
children aged less than 8 years.
•
Before removing the water tank to fill or empty it,
always turn the machine off.
•
Always place the unit on a flat, stable, heat-
resistant work surface.
•
Before brewing, the portafilter must be turned
to the right as tight as possible to prevent the
portafilter from loosening due to high pressure.
•
Serious injury may result from misuse. To protect
against a fire, electric shock or personal injury,
do not immerse cord, electric plugs, heating
base in water or other liquids. Do not operate
any appliance with a damaged cord or plug,
after the appliance malfunctions, or is dropped
or damaged in any manner. Please contact the
manufacturer or his customer service.
•
Heating element surface is subject to residual
heat after use, do not touch the hot surface, use
the handle or the button. Always keep hands
out of container and machine while in use and
afterward to reduce the risk of injury to persons.
•
Coffee-maker shall not be placed in a cabinet
when in use.
•
Cleaning: Do not place the appliance in water
or other liquids. Clean the housing only with a
sponge/cloth moistened in warm, soapy water.
Do not use harsh, abrasive cleaners. See chapter
6 for detailed cleaning instructions.
•
The heating element surface is subject to
residual heat after use.
1.4 Intended use
The manual espresso machine Beko is intended for
use in homes and similar applications, for instance
in staff kitchens, shops, offices and similar areas
or by customers in bed & breakfast, hotels, motels
and other living accommodation. This coffee
machine is not intended for commercial use. The
machine is only intended for preparing coffee and
heating milk and water. Any other use other than
previously stated is considered as improper use.
Danger resulting from improper use!
If not used for its intended purpose or used in any
other way, the coffee machine may be or become a
source of danger.
A
• Therefore, the coffee machine
may only be used for its
intended purpose.
• Observe the procedures
described in this user manual.
No claims of any kind will be accepted for damage
or injury resulting from use of the coffee machine
for other than its intended purpose.
The risk has to be borne solely by the machine owner.
1.5 Limitation of liability
All technical information, data and instructions
on installation, operation and maintenance of
the coffee machine contained in these operating
instructions represent the current status at the
time of printing and are based on the best possible
knowledge gained by experience and knowhow.
No claims can be derived from the information,
illustrations and descriptions in this user manual.
The manufacturer assumes no liability for damage
or injury resulting from failure to observe the user
manual, use for other than the intended purpose,
unprofessional repairs, unauthorised modifications
or use of non-approved spare parts.
6 / EN
1 Important instructions for safety and environment
Semi-Automatic Espresso Machine/ User Manual
1.6 Compliance with the WEEE
Directive and Disposing of the
Waste Product:
This product complies with EU WEEE Directive
(2012/19/EU). This product bears a classification
symbol for waste electrical and electronic
equipment (WEEE).
This symbol indicates that this product
shall not be disposed with other
household waste at the end of its
service life. The used device must be
returned to an offical collection point for
the recycling of electrical and electronic
devices. To find these collection points, please
contact your local authority or retailer where the
product was purchased. Each household performs
an important role in the restoring and recycling of
old appliances. The appropriate disposal of used
appliance helps prevent potential negative
consequences for the environment and human
health.
1.7 Compliance with RoHS
Directive
The product you have purchased complies with EU
RoHS Directive (2011/65/EU). It does not contain
harmful and prohibited materials specified in the
Directive.
1.8 Package information
Packaging materials of the product are
manufactured from recyclable materials
in accordance with our National
Environment Regulations. Do not
dispose of the packaging materials together with
the domestic or other wastes. Take them to the
packaging material collection points designated by
the local authorities.
7 / EN
Semi-Automatic Espresso Machine / User Manual
All declared values on the product and on the printed leaflets are picked up after laboratory measurements performed ac-
cording to related standarts. These values may differ upon usage and ambient conditions.
2 Overview & Control panel
1. Control panel
2. Portafilter
3. Cup holder
4. Drip tray grid
5. Floater
6. Drip tray
7. Water tank lid
8. Water tank
9. Milk tank cover
10. Milk foam adjustment knob
11. Milk tank
12. Single espresso basket
13. Double espresso basket
14. Coffee Scoop / Tamper
15. Capsule piercer
16. Capsule portafilter
17. Pod basket
18. Cleaning needle
1
7
8
9
10
11
12
13
14
15
16
2
4
5
6
3
17
18
1
4
5
2
3
2.1 Control Panel
1
Pre-heating indicator
2
On/off & cancel button
3
General error
4
Cleaning and descaling
button
5
Milk button
8 / EN
Semi-Automatic Espresso Machine/ User Manual
3 Technical data
Power supply: 220-240 V~, 50-60 Hz
Power: 1376 - 1628 W
The right to make technical and design changes is reserved.
All declared values on the product and on the printed leaflets
were obtained from laboratory measurements performed
according to the relevant standards. These values may differ
depending on usage and ambient conditions.
Product Dimensions:
20,5 cm (Width) x 30,8 cm (Height) x 42,3 cm (Depth)
[Width w/out milk cup: 14,4 cm
Depth w/out portafilter: 32,5 cm]
Weight: 4.35kg
Cable Length: >90 cm
Basket Capacities
Single: 10g
Double: 17g
Drip Tray Capacity: Up to 0.2 L
Water Tank Capacity: 1.1±5%L
Machine Pre-heating time: <55s
Volume of coffee* (Default settings):
Espresso: 30-55ml
Double: 65-95ml
Latte: 170-280 ml milk, 30-55 ml coffee
Cappuccino: 114-190 ml milk, 30-55 ml coffee
*Amounts may vary based on different capsule and pod usage.
This button " " will light up as orange when machine needs descaling.
If the NTC is not connected to the power board, the red light of the error indicator will be on at
the time, and there will be no response if any button is pressed.
9 / EN
Semi-Automatic Espresso Machine / User Manual
4 Preparation
4.1 First Time Use
Remove any protective films, stickers and any other packaging material from the appliance.
150mm
1
2
3
1
3
2
150mm
150mm
.
150mm
Choose a safe and stable sur-
face with an easily reachable
power supply and allow the
minimum distance from the
sides of the machines.
Fill the water tank with fresh,
cold pure water at least up to
the MIN marking and at most
up to the MAX marking. (Do not
add hot water)
Then insert tank on to the ma-
chine and the other end of the
power cord into a wall socket
with the suitable power voltage.
The power on/off button " " on
the control panel will light up.
Press that button to turn on the
machine. Put a cup right under
the brewing head and press the
cleaning button " ". The ma-
chine will sound one beep and
start cleaning. Once complet-
ed the machine will be ready to
use.
10 / EN
Semi-Automatic Espresso Machine/ User Manual
4.2 Brewing Single / Double Espresso
.
Bip
3
2
1
Place the single or double
espresso basket into the filter
holder. Fill the freshly ground
coffee powder into the fil-
ter with measuring spoon (ap-
prox. 8-15g) and use the spoon
to flatten the excess powder.
With the tamping end of the
spoon, apply around 15 kg to
push down the powder even
and firmly.
Install the portafilter under the
coffee outlet. Align it with the
unlock symbol, slide it into the
groove, and slowly rotate it to
the right to the lock symbol.
- Place a coffee cup right under
the coffee outlet.
- Press the single or double
button and a beep will sound.
- Selected coffee will start
blinking and the beverage prep-
aration will begin.
After brewing is completed, ma-
chine will sound one beep and
enter idle mode. Remove the
portafilter clockwise. Clean the
portafilter and dry it after each
use.
• Wait 5 seconds after brewing and then take out the filter. This will help remove the moving
filter easily.
• Coffee powder cannot be used after brewing.
• Use the handle extension to knock the coffee residue out while keeping the basket in place.
• To ensure your espresso stays at optimum temperature, we recommend that you preheat
your cups.
• To extract the fullest flavor from your coffee beans, we recommend using whole coffee
beans that have been freshly ground each time espresso is prepared.
• In addition to the coffee used, using fresh cold water that is free of chlorine, odors and other
impurities will help ensure the perfect espresso.
• Store your espresso grounds in an airtight container, and in a cool, dry place to retain the
flavor. Grounds should not be kept for long periods of time as the flavor will be reduced.
4 Preparation
11 / EN
Semi-Automatic Espresso Machine / User Manual
4 Preparation
4.3 Brewing Cappuccino & Latte
Cappuccino or Latte are combinations of one shot of espresso with different amounts of hot milk and
milk froth.
.
1
2
3
1
1
2
Holding the milk tank with one
hand, press the button on the
top of the milk tank lid to re-
move the milk tank rightwards.
Remove the lid of the milk tank
by pressing the release button
on the right side of the lid body.
Add milk to the milk tank. The
milk should always be below
the max mark. The recom-
mended temperature for milk is
4-8 ° C (~ 40-46 ° F). Put on the
lid of the milk tank and attach
the milk tank to the appliance,
it must click audibly into place.
Make sure that the milk tank
fits correctly. Adjust the angle
of the milk foam outlet over the
cup. Adjust the milk foam den-
sity with the help of knob based
on your preferences.
Insert the single basket into
the portafilter. Fill the filter with
finely ground espresso pow-
der (approx. 8-15 g). Press the
powder down with the flat side
of the coffee spoon. Install the
portafilter under the coffee out-
let. Align it with the unlock sym-
bol, slide it into the groove, and
slowly rotate it to the right to the
lock symbol.
This machine allows the user to set the foam ratio by turning the knob from Max to Min to enjoy
the desired foam. Suggested setting for Latte is min-mid, Cappuccino is mid-max. Adjust the
milk foam density based on your preferences.
12 / EN
Semi-Automatic Espresso Machine/ User Manual
Bip
Press the "cappuccino or latte"
button, then one beep sounds.
The selected beverages button
will start blinky and brewing will
start.
The pump will work intermit-
tently as the milk froth first en-
ters your cup. After the milk
froth is ready, the device au-
tomatically starts to brew the
coffee.
When the unit beeps once, the
beverages is ready enjoy!
- The machine will revert to idle
mode.
4.4 Brewing / Adding Milk Foam
Fill in the milk tank and adjust the knob into position. Press the milk foam button " ". Machine will start
milk dispensing automatically (90-140 ml). Once completed machine will revert back to idle stage.
Always make sure the milk tank is placed correctly. If not fitted well; the cappuccino, latte &
milk foam buttons will light off and the functions will not be available. Buzzer will sound as 3
beeps to indicate this.
The removal of the milk tank has no impact on the coffee brewing, single/double espresso
programs can be used.
4 Preparation
13 / EN
Semi-Automatic Espresso Machine / User Manual
4.5 Adjusting Height for Different Cup Size
For smaller cups, the cup tray
(3) can be used.
For average size cups, place cup
over the drip tray (6) in normally
inserted position.
If drip dray is removed for bigger cups, it should be placed back into the machine
right after beverage preparation is completed. If drip tray is not placed back after
beverage preparation, due to internal system release, water might come to the
base and would need a manual cleaning with dry cloth.
4 Preparation
14 / EN
Semi-Automatic Espresso Machine/ User Manual
5 Operation and use
5.1 Capsule Usage
Capsule coffee can be used besides powder coffee by using the capsule accessories. Product is only
suitable for original Nespresso type capsules.
.
Bip
1
2
Capsule should be placed in-
side the capsule portafilter.
Then place the capsule piercer
onto the capsule inside the por-
tafilter. Make sure to insert all
the way through.
After this, same as for pow-
der coffee, place the portafilter
onto the device and turn right
to lock.
Press the beverage of your
choice to prepare your coffee. If
you are going to choose a milk
beverage make sure that milk
tank is filled.
Once completed, take out the
capsule piercer. Residual cap-
sule will stay inside the porta-
filter. Without touching the cap-
sule, you can throw it out by
holding the portafilter handle.
Capsule cannot be used after brewing.
Do not wash the portafilter in the dishwasher.
Do not put your hand directly into the inside of the capsule holder to avoid puncture wounds.
Make sure all accessories and portafilter is cleaned before next use to ensure best
performance.
15 / EN
Semi-Automatic Espresso Machine / User Manual
5 Operation and use
5.2 E.S.E. Pod Usage
In addition to powder & capsule coffee options, Easy-Serve-Espresso pods can also be used to prepare
your beverages.
.
Bip
1
2
Pod basket should be placed
inside the main portafilter. Pod
should be placed inside the pod
basket.
Place the portafilter onto the
device and turn right to lock.
Press the beverage of your
choice to prepare your coffee. If
you are going to choose a milk
beverage make sure that milk
tank is filled.
Once completed, remove the
portafilter to dispose the re-
sidual pod. You can use the
small handle on the portafilter
in place while knocking out the
residual pod.
E.S.E pod cannot be used after brewing.
5.3 Adjusting the Volume of your Coffee / Milk
Setting amounts for Single & Double Espresso
1. Select the function that is to be reprogrammed. Press the appropriate button (single or double
espresso) and keep it held down. You will hear one beep. [single/double espresso programmable
amounts (min: 30/60ml, max: 50/100ml)]
2. Only let go of the button once the desired amount of coffee has passed through. You will hear two
beeps. This amount is now saved under the corresponding function.
Setting amounts for Latte, Cappuccino & Milk Foam
1. Select the function that is to be reprogrammed. Press the appropriate button (cappuccino, latte or milk)
and keep it held down. You will hear one beep. (The shortest time of brewing milk is 10s, the longest
time is 45s.)
2. Only let go of the button once the time of brewing milk that you want has passed through. You will hear
two beeps. This time is now saved under the corresponding function.
3. To change amount of black coffee; after milk dispensing is completed, press and hold down selected
beverage icon until desired amount has passed through.
16 / EN
Semi-Automatic Espresso Machine/ User Manual
The adjusted beverage settings will be saved to device memory for future use until resetted or
changed again.
To reset single beverage to default/factory setting:
Press and hold down any beverage and power buttons together for
more than 3 seconds to reset the selected beverage amount.
To reset all beverages to default/factory setting:
Press and hold down single and double espresso buttons together
for more than 3 seconds to reset the all beverage amount.
Standby time: The machine will automatically shut down after 29 minutes without any
operation (or after work).
5 Operation and use
17 / EN
Semi-Automatic Espresso Machine / User Manual
6 Cleaning
6.1 Cleaning the Milk Tank
Pour water in the milk tank until MAX level and press the milk foam button " ". Once completed, take
out the milk tank components (9) (11) and clean them under clean water.
Clean the milk tank after each use to avoid milk residue.
Use the cleaning needle (18)
to clean inside the milk frother inlet.
6.2 Cleaning/Rinsing Function
For cleaning the brewing head, place a container under the brewing head and press the cleaning button
" ". Cleaning will be completed within 16 seconds and the machine will be ready to use.
• If you do not use the machine for more than 5 consecutive days, rinse and drain the water tank.
• All accessories and drip tray and its grid (6) (4) can be cleaned manually under clean water.
• Do not put the portafilters into the dishwasher.
6.3 Descale Function
When descaling is required, descale icon " " will light up as orange. Place a container that can hold 1.5L
under the brewing head. Pour water into the water tank until MAX level and mix with scale remover or
citric acid. Press & hold descale button " " for more than 3 seconds and you will hear two beep sounds
which indicates that the first cycle of descaling has begun. The first cycle will take around 15 minutes.
Once completed, the descale icon will turn white " ".
18 / EN
Semi-Automatic Espresso Machine/ User Manual
Empty and replace the container under the brewing head. Clean and fill water tank until MAX level with
clean water. Press & hold descale button " " for more than 3 seconds and you will hear two beep
sounds which indicates that the second cycle of descaling has begun. The second cycle will take around
6 minutes. Once all complete, the machine will go back to idle stage and will be ready to use.
To reset descale warning status:
Press and hold power and descale button together for more than
3 seconds.
• Descale is required after predefined brewing cycle.
• Resetting descaling warning status is not suggested for maintaining the best condition of
the appliance.
6 Cleaning
19 / EN
Semi-Automatic Espresso Machine / User Manual
7.1 Problems, possible causes and remedies
Problem Cause Remedy
Coffee runs down
the side of the
portafilter.
Portafilter (2) is not properly
inserted.
Turn the handle of the portafilter (2) further to the right.
Edge of sieve is not free of
ground coffee
Turn off the machine, remove the portafilter (2) holder and
clean the edges of the sieve.
Screen inside brew head is
dirty.
Clean the brew head using a wet cloth and run the cleaning
function without placing the portafilter.
Very little or no
coffee flows
through the por-
tafilter.
No water in tank. Fill the tank with water.
The screen inside the brew
head is blocked.
Brew water through the screen without the portafilter (2)
inserted. If no water comes through, unscrew the screen,
clean and replace.
The sieve is blocked.
Correction: Clean the sieve, insert into the portafilter (2)
and pump water through without coffee. If no water comes
through the sieve call Customer Service to order a replace-
ment sieve.
Espresso brews
out only as drops.
Coffee grounds are too fine or
packed down too firmly.
Do not tamp coffee grounds so firmly. Use a coarser grind
of coffee.
Machine blocked by calcium
deposits.
Descale the appliance. See page 15.
Espresso brews
too quickly.
Ground coffee is too coarse. Use a finer grind.
Not enough coffee in the sieve. Use more ground coffee.
No crema.
Coffee old or too dry. Use fresh coffee.
Coffee not pushed down firmly
enough. Water pushes through
the coffee too fast.
Tamp coffee grounds more firmly. Use a finer grind.
Coffee too coarse.
Use a conical burr grinder to obtain a finer and more consis-
tent grind.
Coffee blend not suited to
espresso coffee.
Change brand of espresso.
Not enough froth
when frothing
milk.
Milk not fresh. Use fresh milk.
Milk not suitable. Check that the milk is suitable for frothing.
Milk was too warm from the
start.
Use milk straight from the refrigerator (34°F).
Not enough milk to froth. Use more cold milk.
Milk inlet hole is blocked.
Use the cleaning needle (18) to clean inside the milk frother
inlet.
7 Troubleshooting
EN-Additional Information for User Manual:
Technical information on the operating Low Power Modes pursuant to EU Regulation 2023/826
Mode POWER CONSUMPTION(WATT) PERIOD(MINUTES)*
Off 0,5 30
Standby - -
Standby Mode with information or status display - -
Networked Standby - -
*:The period after which the equipment reaches automatically standby mode, off mode or networked standby in minutes and rounded to the
nearest minute.
55 Blanck Street, Ormeau Q 4208
P O Box 354, Ormeau Q 4208
p : 5549 3146 f : 5549 3546
ABN : 49 152 055 162
Sensitivity: Public
ORIGINAL MANUFACTURER’S WARRANTY
ADVICE FORM
BEKO COFFEE MACHINE
24 months warranty, full parts and labour warranty only.
WARRANTY CONDITIONS
The following conditions apply only in relations to the warranty expressly given on this Warranty Advice Form supplied with the product. This
warranty only applies to appliances purchased and used in Australia or New Zealand and is in addition to (and does not exclude, restrict or
modify in any way) other rights and remedies under a law to which the appliances relate, including any non-excludable statutory guarantees in
Australia and New Zealand. It applies to the original purchaser and for appliances used in domestic applications only.
1. This warranty does not apply:
(a) if the identification number attached to the appliance has been altered, rendered illegible or removed;
(b) to light globes;
(c) to paint and vitreous enamel finishes and glass;
(d) to surfaces damaged by use of aerosols or cleaners;
(e) if the appliance has been –
(i) subject to misuse, abuse, negligence, accident, fire or floods;
(ii) connected or improper, inadequate or faulty electricity, gas, water or drainage services or intake or exhaust
ducts or flues, or operated using incorrect or contaminated fuels or lubricants;
(iii) installed, maintained or operated otherwise than in accordance with the instructions furnished by Beko including the
improper use of detergents, bleaches, cleaners or other additives;
(iv) damaged by foreign objects in the appliance;
(v) serviced, repaired or altered otherwise than by Beko authorised service agents of Beko, or using other than Beko
approved replacement parts.
2. The purchaser shall be responsible for any expenses involved in making the appliances readily accessible for servicing, the purchaser
shall be responsible for any costs of transporting the appliance or parts thereof to and from the nearest Beko authorised service agent.
3. This warranty is the only expressed warranty given by Beko.
4. Beko reserves the right to determine whether or not the fault is caused by faulty workmanship or material or that any part is defective.
5. Where permitted by law, this warranty shall not apply to loss suffered through or resulting from the non-operation or the ineffective
operation of the appliance or any part of the appliance.
6. The purchaser must produce proof of the date of purchase together with this Warranty Advise Form when making a claim.
7. Subject to your statutory rights as to the merchantable quality of the product or accessory. In the event of a product or accessory being
replaced during the guarantee, the guarantee on the replacement will expire at the original date, i.e., 24 months from the original
purchase date.
8. Australia: For Appliances and services provided by Beko in Australia, Beko goods come with a guarantee by Beko that cannot be
excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for
any other reasonably foreseeable loss or damage. You are also entitled to have the Appliance repaired or replaced if the Appliance
fails to be of acceptable quality and the failure does not amount to a major failure. ‘Acceptable quality’ and ‘major failure’ have the
same meaning as referred to in the Australian Consumer Law.
9. New Zealand: For Appliances and services provided by Beko in New Zealand, the Appliances come with a guarantee by Beko
pursuant to the provisions of the Consumer Guarantees Act, the Sales of Goods Act and the Fair Trading Act. Where the Appliance
was purchased in New Zealand for commercial purposes the Consumer Guarantee Act does not apply.
These Warranty Conditions supersedes and excludes all other representations, conditions and warranties, except those implied
by legislation previously referred to.
For Service or Spare Parts: Aust 1300 282 356 NZ 0800 692 356
Beko A&NZ Pty Ltd
55 Blanck Street , Ormeau QLD, 4208
AUSTRALIA
www.beko.com.au
