INREACH
®
MINI 2
Owner’s Manual
© 2022 Garmin Ltd. or its subsidiaries
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change
or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to
www.garmin.com for current updates and supplemental information concerning the use of this product.
Garmin
®
, the Garmin logo, ANT+
®
, fēnix
®
, inReach
®
, and TracBack
®
are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. Garmin Explore
™
,
Garmin Express
™
, Garmin Messenger
™
, and Garmin Response
SM
are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission
of Garmin.
The BLUETOOTH
®
word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Garmin is under license. Iridium
®
is a registered trademark of Iridium
Satellite LLC. Other trademarks and trade names are those of their respective owners.
Table of Contents
Introduction......................................1
Getting Started........................................ 1
Device Overview...................................... 1
Buttons.....................................................2
Turning On the Device......................... 2
Viewing the Main Menu.......................2
Power Menu......................................... 2
Viewing the Widget Glances............... 3
Widget Glances....................................3
Status Icons......................................... 4
Pairing Your Phone and Activating the
Device...................................................... 4
Garmin Messenger App...................... 5
Garmin Explore.................................... 5
Iridium Satellite Network.....................5
Bluetooth Connected Features........... 5
Syncing inReach Data......................... 5
Testing the Device...................................6
inReach Device Features.................. 6
Messages................................................ 6
Sending a Check-In Message............. 6
Sending a Text Message.....................7
Checking for Messages...................... 7
Replying to a Message........................ 7
Adding a Contact from a Message.... 7
Viewing Message Details....................8
Navigating to a Message Location.... 8
Deleting Messages.............................. 8
Contacts...................................................8
Adding a Contact................................. 8
Editing a Contact................................. 8
Deleting a Contact............................... 8
inReach Tracking.....................................9
Starting Tracking................................. 9
Navigating to the Start of Your Current
Track.................................................... 9
Stopping Tracking............................... 9
Sharing Your Tracking Page............... 9
SOS.........................................................10
Initiating an SOS Rescue...................10
Sending a Custom SOS Message.... 11
Canceling an SOS Request............... 11
Navigation Widget.......................... 11
Acquiring GPS Satellite Signals............11
Panning and Zooming the Map............ 12
Changing the Map Orientation............. 12
Setting the Compass Heading............. 12
Calibrating the Compass...................... 12
Sharing Your Current Location............. 12
Waypoints.............................................. 13
Saving Your Current Location as a
Waypoint............................................ 13
Saving a Message Location as a
Waypoint............................................ 13
Navigating to a Waypoint..................13
Navigating Using TracBack®............... 13
Navigating to Known Coordinates....... 13
Navigating with Sight 'N Go.................. 14
Courses.................................................. 14
Navigating a Saved Course...............14
Reversing a Course........................... 14
Activities................................................ 14
Viewing the Current Activity............. 14
Navigating to the Start of Your Current
Activity............................................... 14
Navigating a Saved Activity.............. 15
Stopping Navigation............................. 15
Weather..........................................15
Adding a Waypoint as a Weather
Location................................................. 15
Setting the Weather Location............... 15
Requesting an inReach Weather
Forecast................................................. 15
Updating an inReach Weather
Forecast................................................. 16
Deleting a Weather Location................ 16
Data Use and History...................... 16
Viewing Plan Details............................. 16
Viewing Data Use.................................. 16
Saved Data..................................... 16
Viewing Saved Data.............................. 17
Editing a Waypoint................................ 17
Exporting Saved Data to GPX Format.. 17
Deleting Saved Data.............................. 17
Customizing the Device.................. 17
Tracking Settings.................................. 17
Table of Contents i
Sounds Settings.................................... 18
Map Settings......................................... 18
Phone Settings...................................... 18
inReach Remote Settings..................... 18
System Settings.................................... 19
Time Settings.................................... 19
Units Settings.................................... 19
Device Information......................... 20
Product Updates................................... 20
Setting Up Garmin Express............... 20
Getting More Information................. 20
Viewing E-Label Regulatory and
Compliance Information....................... 20
Attaching the Spine Mount Adapter.....21
Attaching a Lanyard.............................. 22
Locking and Unlocking the Buttons..... 22
Device Care............................................22
Cleaning the Device...........................22
Troubleshooting.................................... 22
Maximizing Battery Life.................... 22
Resetting All Default Settings........... 23
My device is in the wrong
language............................................ 23
Charging the inReach Device............... 23
Saving Energy While Charging the
Device.................................................24
Specifications........................................24
Battery Information........................... 24
ii Table of Contents
Introduction
WARNING
See the Important Safety and Product Information guide in the product box for product warnings and other
important information.
Getting Started
When using your device the first time, you should complete these tasks to set it up and get to know the basic
features.
1 Press and hold to turn on the device.
2 Follow the on-screen instructions to select your language and begin activating your device.
3 Download the Garmin Messenger
™
app to your phone, and follow the on-screen instructions to pair and
activate your device (Pairing Your Phone and Activating the Device, page4).
You can use the Garmin Messenger app to compose and send messages using your phone.
4 Download the Garmin Explore
™
app to your phone, and log in with the account information you used to
activate a service plan.
You can use the Garmin Explore app for planning adventures, navigating, and sharing data with friends and
family.
5 Sync your device with the Garmin Messenger or Garmin Explore app (Syncing inReach Data, page5).
6 Test your device before you begin your trip (Testing the Device, page6).
Device Overview
Internal Iridium
®
antenna
Buttons
USB port (under weather cap)
SOS button (under protective cap)
Power button
Mounting screw
Introduction 1
Buttons
Press to scroll through menus, pages, and settings.
From the home page, press to view the widget glances.
Press to scroll through menus, pages, and settings.
From the home page, press to view the widget glances.
Press to cancel or return to the previous page.
OK
Press to choose an option or to acknowledge a message.
From the home page, press to open the main menu.
Press to open the options menu for the page that is currently open (if available).
Press and hold to turn the device on.
Press to open the power menu.
Turning On the Device
Press and hold .
Viewing the Main Menu
1 From the home page, press OK to open the main menu.
2 Press or to scroll through the menu options.
Power Menu
The Power menu displays the device battery life. It also allows you to adjust settings and turn off the device.
Press to open the power menu.
: Displays the current battery level.
Lock Buttons: Locks the device buttons to prevent inadvertent button presses.
Mute Sounds: Mutes all device tones.
Brightness: Adjusts the brightness of the screen.
Alerts: Displays alert messages.
Power Off: Turns off the device.
2 Introduction
Viewing the Widget Glances
Widget glances provide quick access to messages, tracking, navigation, weather, and more (Widget Glances,
page3).
1 From the home page, press or .
The device scrolls through the widget glances and displays summary data for each.
2 Press OK to view more information.
3 Press OK to open the options menu (if available).
Widget Glances
From the home page, press or to scroll through the widget glances.
Home page: Displays the date, time, and status icons (Status Icons, page4).
Activation: Allows you to activate your device if you skipped activation during the initial setup (Pairing Your
Phone and Activating the Device, page4).
Messages: Allows you to send and receive text messages using the Iridium satellite network or Garmin
Messenger app (Messages, page6).
Tracking: Allows you to start and stop tracking. While tracking, the glance shows your distance traveled and
time spent tracking (inReach Tracking, page9).
Navigation: Displays location information and provides access to additional navigation features (Navigation
Widget, page11).
Weather: Allows you to request weather forecasts (Weather, page15).
Message Check: Allows you to check for new messages (Checking for Messages, page7).
Introduction 3
Status Icons
Transmitting data
Tracking enabled
Navigating
Unread messages
Sounds muted
Charging battery
Charging complete
Approaching minimum operating temperature
Approaching maximum operating temperature
Pairing Your Phone and Activating the Device
WARNING
Before you can use the inReach features of your device, including messaging, SOS, tracking, and inReach
Weather, you must have an active satellite subscription. Always test your device before you use it outdoors.
The inReach device works best when it is paired with the Garmin Messenger app. The app allows you to
compose and send messages using your phone, and to sync contacts and check-in messages with your device.
1 Turn on the inReach device.
2 Bring your compatible phone within 10m (33ft.) of your device.
3 From the app store on your phone, download the Garmin Messenger app, and follow the on-screen
instructions to complete the pairing process.
4 Follow the on-screen instructions to activate a subscription service plan.
After the devices are paired, they connect automatically when they are turned on and within Bluetooth
®
range.
4 Introduction
Garmin Messenger App
WARNING
Before you can use certain inReach features of the Garmin Messenger app, including SOS, tracking, and inReach
Weather, you must have an active satellite subscription and a connected inReach device. Always test the app
before you use it outdoors.
With an inReach subscription and a connected inReach device, you can use the Garmin Messenger app for
tracking, SOS, inReach Weather, and managing your service plan. You can also use the app to message other
inReach device users, as well as friends and family. The app works over both the Iridium satellite network
and the internet (using a wireless connection or cellular data on your phone). Messages sent using a wireless
connection or cellular data on your phone do not incur data charges or additional charges on your inReach
subscription. Messages received may incur charges if message delivery is attempted over both the Iridium
satellite network and the internet. Standard text messaging rates for your cellular data plan apply.
Without an inReach subscription, the app also provides a messaging experience for friends and family. Anyone
can download the app and connect their phone, allowing them to communicate with other app users over
the internet (no login is required). App users can also create group messaging threads with other SMS phone
numbers. New members added to the group message can download the app to see what others are saying.
You can download the Garmin Messenger app from the app store on your phone (garmin.com/messengerapp).
Garmin Explore
The Garmin Explore website and app allow you to plan trips and use cloud storage for your waypoints, courses,
and collections. They offer advanced planning both online and offline, allowing you to share and sync data with
your compatible Garmin
®
device. You can use the app to download maps for offline access, and then navigate
anywhere without using your cellular service.
You can download the Garmin Explore app from the app store on your phone, or you can go to
explore.garmin.com.
Iridium Satellite Network
Your device requires a clear view of the sky to transmit messages and track points over the Iridium satellite
network. Without a clear view of the sky, your device attempts to send the information until it acquires satellite
signals.
TIP: For the best connection with satellites, place the device with the antenna pointed toward the sky.
Bluetooth Connected Features
Your device has several Bluetooth connected features for your compatible phone using the Garmin Explore and
Garmin Messenger apps.
Downloadable Features: View downloaded maps, such as aerial imagery and USGS quadrangle maps on your
phone in the Garmin Explore app. You should download maps and charts before going on your trip.
Sync: Both the Garmin Explore and Garmin Messenger apps can sync data with your device, such as plan
changes, contacts, and messages.
Messages: Both the Garmin Explore and Garmin Messenger apps allow you to read and write messages and
access the contacts list on your phone. Messages appear on both devices.
NOTE: You can have only one phone paired with your inReach device at a time.
Syncing inReach Data
After you make changes to your data, such as plan changes, contacts, or check-in messages, you must sync
your device using the app.
1 Open the paired Garmin Messenger or Garmin Explore app.
2 Wait while your data syncs.
TIP: You can check the connection status on the Device tab in the app.
Introduction 5
Testing the Device
You should test the device outdoors before using it on a trip to ensure your satellite subscription is active.
1 From the home page, press OK to open the main menu.
2 Select Service Plan > Test Service.
3 Press OK.
4 Select Begin Test.
Wait while the device sends a test message. When you receive a confirmation message, your device is ready
to use.
inReach Device Features
WARNING
Before you can use the inReach features of your inReach Mini 2 device, including messaging, SOS, tracking,
and inReach Weather, you must have an active satellite subscription. Always test your device before you use it
outdoors.
Ensure you have a clear view of the sky when using the messaging, tracking, and SOS functions, because these
features require satellite access to operate properly.
NOTICE
Some jurisdictions regulate or prohibit the use of satellite communications devices. It is the responsibility of the
user to know and follow all applicable laws in the jurisdictions where the device is intended to be used.
Messages
Your inReach Mini 2 device sends and receives text messages using the Iridium satellite network. You can send
messages to an SMS phone number, an email address, or another device that uses inReach technology. Each
message you send includes your location details where allowed.
Sending a Check-In Message
Check-in messages are messages with predefined text and recipients. You can use the Garmin Messenger app
to customize recipients.
1 From the home page, press OK to open the main menu.
2 Select Check In.
3 Press or to scroll through the check-in messages.
4 Press OK to select a message.
5 Press OK to send the message.
6 inReach Device Features
Sending a Text Message
1 From the home page, press OK to open the main menu.
2 Select Send Message.
3 Choose recipients from your contacts list, or select Type Contact to enter each recipient's contact
information.
4 Select Next.
5 Select an option:
• To start with a pre-written message, press or to scroll through the quick text messages.
NOTE: You can add and edit quick text messages on the Garmin Explore website.
• To write a custom message, select Type Message.
NOTE: To select from the autocomplete options, begin typing a word, hold OK, and use and to scroll
through the options.
6 When you have finished your message, select .
7 Press OK to send the message.
Checking for Messages
When you send a message, your device listens for replies for 10 minutes. The device also checks for new
messages every hour. When you are using the inReach tracking feature, your device automatically checks for
messages at your tracking interval.
NOTE: To receive messages, your device must have a clear view of the sky and be in view of a satellite when it
checks for messages.
You can force a check for messages by manually checking for messages, sending a message, or sending a
track point. During a check, your device connects to satellites and receives messages waiting to be sent to your
device.
1 From the home page, press or to scroll through the widget glances.
2 Select Message Check.
Replying to a Message
1 From the home page, press or to scroll through the widget glances.
2 Select Messages, and select a conversation.
3 Select Reply.
4 Select an option:
• To start with a pre-written message, press or to scroll through the quick text messages.
• To write a custom message, select Type Message.
5 When you have finished your message, select .
6 Press OK to send the message.
Adding a Contact from a Message
1 From the home page, press or to scroll through the widget glances.
2 Select Messages, and select a conversation.
3 Select Add Contact.
TIP: You can edit the details of an existing contact or add a new contact record.
inReach Device Features 7
Viewing Message Details
1 From the home page, press or to scroll through the widget glances.
2 Select Messages, and select a conversation.
3 Select a message.
4 Press OK to open the options menu.
5 Select View Details.
Navigating to a Message Location
When you receive a message from another device with inReach technology, the message may include location
information. For these messages, you can navigate to the location from which the message was sent.
1 From the home page, press or to scroll through the widget glances.
2 Select Messages, and select a conversation with location information.
3 Select a message.
4 Press OK to open the options menu.
5 Select Navigate.
Deleting Messages
1 From the home page, press or to scroll through the widget glances.
2 Select Messages, and select a conversation.
3 Select Delete.
Contacts
You can add, delete, and edit contacts on the inReach Mini 2 device.
Adding a Contact
1 From the home page, press OK to open the main menu.
2 Select Contacts > Add Contact.
3 Select an item to edit.
4 Enter the new information.
Editing a Contact
1 From the home page, press OK to open the main menu.
2 Select Contacts.
3 Select a contact.
4 Press OK to open the options menu.
5 Select Edit Details.
6 Select an item to edit.
7 Enter the new information.
Deleting a Contact
1 From the home page, press OK to open the main menu.
2 Select Contacts.
3 Select a contact.
4 Press OK to open the options menu.
5 Select Delete.
8 inReach Device Features
inReach Tracking
You can use the tracking feature on your inReach Mini 2 device to record track points and transmit them over
the Iridium satellite network at the specified send interval.
Track points appear on the Garmin Explore website.
Starting Tracking
1 From the home page, press OK to open the main menu.
2 Select Start Tracking.
Your track appears on a tracking webpage for friends and family to follow your trip. Starting the tracking
feature also starts recording your path as an activity.
Navigating to the Start of Your Current Track
1 From the home page, press or to scroll through the widget glances.
2 Select Tracking.
3 Press OK to open the options menu.
4 Select Back to Start.
Stopping Tracking
1 From the home page, press OK to open the main menu.
2 Select Stop Tracking.
3 Select an option:
• To save the track as an activity, select Save.
• To clear the track, select Discard.
Sharing Your Tracking Page
You can share a link to a tracking webpage with other people. The system automatically adds text, including link
information, to the end of your message.
1 From the home page, press or to scroll through the widget glances.
2 Select Tracking.
3 Press OK to open the options menu.
4 Select Share With.
5 Select recipients from your contacts list, or select Type Contact to enter each recipient's contact
information.
6 Select Next.
7 Select an option:
• To start with a pre-written message, press or to scroll through the quick text messages.
• To write a custom message, select Type Message.
8 When you have finished your message, select .
9 Press OK to send the message.
inReach Device Features 9
SOS
WARNING
Before you can use the SOS function, you must have an active satellite subscription. Always test your device
before you use it outdoors.
Ensure you have a clear view of the sky when using the SOS function, because this feature requires satellite
access to operate properly.
NOTICE
Some jurisdictions regulate or prohibit the use of satellite communications devices. It is the responsibility of the
user to know and follow all applicable laws in the jurisdictions where the device is intended to be used.
During an emergency, you can use your inReach Mini 2 device to contact the Garmin Response
SM
center to
request help. Pressing the SOS button sends a message to the Garmin Response team, and they notify the
appropriate emergency responders of your situation. You can communicate with the Garmin Response team
during your emergency while you wait for help to arrive. You should only use the SOS function in a real
emergency situation.
Initiating an SOS Rescue
You can initiate an SOS rescue with the device turned on or off if the device has battery power.
1 Lift the protective cap from the SOS button .
2 Press and hold the SOS button.
3 Wait for the SOS countdown.
The device sends a default message to the emergency response service with details about your location.
4 Reply to the confirmation message from the emergency response service.
Your reply lets the emergency response service know that you are capable of interacting with them during
the rescue. If you do not reply, the emergency response service will still initiate a rescue.
For the first 10 minutes of your rescue, an updated location is sent to the emergency response service every
minute. To conserve battery power after the first 10 minutes, an updated location is sent every 10 minutes.
TIP: You can also initiate an SOS rescue and interact with the Garmin Response team using the Garmin
Messenger app. You must have an active satellite subscription to use the SOS feature in the app.
10 inReach Device Features
Sending a Custom SOS Message
After pressing the SOS button to initiate an SOS rescue, you can reply with a custom message.
1 From the home page, press or to scroll through the widget glances.
2 Select SOS > Reply to compose a custom SOS message.
3 Select an option:
• To start with a pre-written message, press or to scroll through the quick text messages.
• To write a custom message, select Type Message.
4 When you have finished your message, select .
5 Press OK to send the message.
Your reply lets the emergency response service know that you are capable of interacting with them during the
rescue.
Canceling an SOS Request
If you no longer need assistance, you can cancel an SOS request after it is sent to the emergency response
service.
1 Lift the protective cap, and hold the SOS button.
2 Select Cancel SOS.
3 When prompted to confirm your cancellation request, select Cancel SOS.
Your device transmits the cancellation request. When you receive a confirmation message from the
emergency response service, the device returns to normal operation.
Navigation Widget
From the home page, press or to scroll through the widget glances. Select Navigation, and press or
to scroll through the navigation pages.
Map: represents your location on the map. As you travel, moves and displays your path. Depending on your
zoom level, waypoint names and symbols may appear on the map. You can zoom in on the map to see more
detail. When you are navigating to a destination, your route is marked with a line on the map. When you start
tracking, your activity recording appears on the map.
Compass: Shows your heading.
Location: Displays your current GPS location and elevation. Each message you send includes a link to your
current location. You can also send your GPS coordinates as text within a message.
Acquiring GPS Satellite Signals
Before you can use GPS navigation features, you must acquire satellite signals.
When you turn on your navigation device, the GPS receiver must collect satellite data and establish the current
location. The time required to acquire satellite signals varies based on several factors, including how far you are
from the location where you last used your navigation device, whether you have a clear view of the sky, and how
long it has been since you last used your navigation device. The first time you turn on your navigation device, it
may take several minutes to acquire satellite signals.
1 Turn on the device.
2 Wait while the device locates satellites.
It may take up to 60 seconds to acquire satellite signals.
3 If necessary, go to an open area, away from tall buildings and trees.
Navigation Widget 11
Panning and Zooming the Map
1 From the home page, press or to scroll through the widget glances.
2 Select Navigation, and scroll to the map.
3 Press OK to open the options menu.
4 Select Pan/Zoom Map.
5 Select an option:
• To toggle between panning up and down, panning left and right, or zooming, press OK.
• To pan or zoom the map, press and .
• To quit, press .
Changing the Map Orientation
1 From the home page, press or to scroll through the widget glances.
2 Select Navigation, and scroll to the map.
3 Press OK to open the options menu.
4 Select an option:
• Select North Up to show north at the top of the map.
• Select Track Up to show your current direction of travel at the top of the map.
Setting the Compass Heading
1 From the home page, press or to scroll through the widget glances.
2 Select Navigation, and scroll to the compass.
3 Press OK to open the options menu.
4 Select Lock Heading.
5 Point the top of the device toward your heading, and press OK.
When you deviate from the heading, the compass displays the direction from the heading and the degree of
deviation.
Calibrating the Compass
NOTICE
Calibrate the electronic compass outdoors. To improve heading accuracy, do not stand near objects that
influence magnetic fields, such as vehicles, buildings, and overhead power lines.
If you experience irregular compass behavior, for example, after moving long distances or after extreme
temperature changes, you can manually calibrate the compass.
1 From the home page, press or to scroll through the widget glances.
2 Select Navigation, and scroll to the compass.
3 Press OK to open the options menu.
4 Select Calibrate.
5 Follow the on-screen instructions.
Sharing Your Current Location
1 From the home page, press or to scroll through the widget glances.
2 Select Navigation, and scroll to your GPS coordinates.
3 Press OK to open the options menu.
4 Select Share With to send your location details as text within a message.
12 Navigation Widget
Waypoints
Waypoints are locations you record and store in the device. Waypoints can mark where you are, where you are
going, or where you have been.
Saving Your Current Location as a Waypoint
1 From the home page, press OK to open the main menu.
2 Select Mark Waypoint.
Saving a Message Location as a Waypoint
When you send a message or when you receive a message from another device with inReach technology, the
message may include location information. For these messages, you can save the location from which the
message was sent as a waypoint.
1 From the home page, press or to scroll through the widget glances.
2 Select Messages, and select a conversation with location information.
3 Select a message.
4 Press OK to open the options menu.
5 Select Mark Waypoint.
Navigating to a Waypoint
1 From the home page, press OK to open the main menu.
2 Select Navigate > Waypoints.
3 Select a waypoint.
4 Press OK to open the options menu.
5 Select Go.
Navigating Using TracBack
®
You can navigate back to the beginning of your path.
NOTE: This can be helpful if you get lost and need to find your way back to camp or the trail head.
1 From the home page, press OK to open the main menu.
2 Select Navigate > TracBack.
3 Select a time interval.
4 Press to scroll through the recorded points.
5 Press OK to select a point to navigate to.
6 Select an option:
• To navigate back to the selected point along the path you traveled, select Follow Path.
• To navigate back to the selected point in a straight line, select Straight Line.
Navigating to Known Coordinates
1 From the home page, press OK to open the main menu.
2 Select Navigate > Coordinates.
3 Enter the coordinates.
4 Press OK to start navigation.
Navigation Widget 13
Navigating with Sight 'N Go
You can point the device at an object in the distance, lock in the direction, and navigate to the object.
1 From the home page, press OK to open the main menu.
2 Select Navigate > Sight 'N Go.
3 Point the device at an object.
4 Press OK to start navigation.
Courses
A course can have multiple destinations, and can be navigated point to point or on routable roads. You can
create and save courses in the Garmin Explore app.
Navigating a Saved Course
1 From the home page, press OK to open the main menu.
2 Select Navigate > Courses.
3 Select a course.
4 Press OK to open the options menu.
5 Select Go.
Reversing a Course
You can switch the start and end points of your course to navigate in reverse.
1 From the home page, press OK to open the main menu.
2 Select Navigate > Courses.
3 Select a course.
4 Press OK to open the options menu.
5 Select Reverse Course.
Activities
While tracking, your device records your path as an activity. You can view details about your activity, including
distance and time, and view the path of your activity on a map.
Viewing the Current Activity
When you start tracking, your device starts recording your path as an activity (Starting Tracking, page9).
1 From the home page, press OK to open the main menu.
2 Select Saved > Activities > Current Activity.
3 Select View Details or View on Map.
Navigating to the Start of Your Current Activity
While recording an activity, you can navigate back to the beginning of your path. This can be helpful when
finding your way back to camp or the trail head.
1 From the home page, press OK to open the main menu.
2 Select Navigate > Activities > Current Activity.
3 Press OK to open the options menu.
4 Select Back to Start.
14 Navigation Widget
Navigating a Saved Activity
1 From the home page, press OK to open the main menu.
2 Select Navigate > Activities.
3 Select an activity.
4 Press OK to open the options menu.
5 Select Go.
Stopping Navigation
1 From the home page, press OK to open the main menu.
2 Select Stop Navigation.
Weather
inReach Weather: You can receive weather information through your inReach subscription. Your device can
send an inReach message to request basic, extended, or marine weather forecasts. You can receive weather
forecasts for your current location or a new location, such as a saved waypoint. Weather forecasts incur data
charges or additional charges on your inReach subscription.
Adding a Waypoint as a Weather Location
You can add a saved waypoint as a weather location (Waypoints, page13).
1 From the home page, press or to scroll through the widget glances.
2 Select Weather.
3 Press OK to open the options menu.
4 Select Change Location > New Location.
5 Select a waypoint.
Setting the Weather Location
1 From the home page, press or to scroll through the widget glances.
2 Select Weather.
3 Press OK to open the options menu.
4 Select Change Location.
5 Select your current location or a previously used waypoint.
Requesting an inReach Weather Forecast
For best results, you should ensure your device has a clear view of the sky when you request an inReach
weather forecast.
1 From the home page, press or to scroll through the widget glances.
2 Select Weather.
3 Press OK to open the options menu.
4 Select Update.
5 If necessary, select a forecast type.
NOTE: For best results, you should request a marine forecast for a location away from shore and over a large
body of water. Marine forecasts are not available for land locations or inland lakes.
The device sends a request for the forecast. It may take several minutes to receive the weather forecast data.
After the device finishes downloading the data, you can view the forecast at any time until all of the information
in the forecast has expired. You can also update the forecast at any time.
NOTE: Updating a forecast incurs data charges or additional usage charges.
Weather 15
Updating an inReach Weather Forecast
You can update an inReach weather forecast that has expired or contains outdated information. Updating a
forecast incurs the same data charges or additional charges as requesting a forecast.
1 From the home page, press or to scroll through the widget glances.
2 Select Weather.
3 Press OK to open the options menu.
4 Select Update.
The device requests an updated forecast. If you update the My Location forecast, the device requests an
updated forecast for your current location. It may take several minutes to receive the updated weather forecast
data.
Deleting a Weather Location
You must set the weather location before you can delete it (Setting the Weather Location, page15).
You can delete an expired forecast or a forecast for a location that you no longer need.
1 From the home page, press or to scroll through the widget glances.
2 Select Weather.
3 Press OK to open the options menu.
4 Select Remove.
Data Use and History
You can view plan details and data use on the inReach Mini 2 device.
Viewing Plan Details
You can view the details of your current data plan and check for data plan updates.
1 From the home page, press OK to open the main menu.
2 Select Service Plan > Plan Details.
Viewing Data Use
You can view the number of messages, check-in messages, and track points sent during the current billing
cycle. The data use counter resets automatically at the beginning of each billing cycle.
1 From the home page, press OK to open the main menu.
2 Select Service Plan > Data Use.
Saved Data
From the home page, press OK to open the main menu. Select Saved.
Waypoints: Waypoints are locations you record and store in the device. Waypoints can mark where you are,
where you are going, or where you have been.
Courses: A course can have multiple destinations, and can be navigated point to point or on routable roads. You
can create and save courses in the Garmin Explore app.
Activities: While tracking, your device records your path as an activity. You can view details about your activity,
including distance and time, and view the path of your activity on a map.
16 Data Use and History
Viewing Saved Data
1 From the home page, press OK to open the main menu.
2 Select Saved.
3 Select a category.
4 Select a saved item.
5 Select View Details or View on Map.
Editing a Waypoint
1 From the home page, press OK to open the main menu.
2 Select Saved > Waypoints.
3 Select a waypoint, and select Edit Details.
4 Select an option:
• To change the name of the waypoint, select Name.
• To change the symbol representing the waypoint, select Icon.
• To change the GPS coordinates of the waypoint, select Position.
5 Enter the new information.
Exporting Saved Data to GPX Format
You can export saved waypoints, activities, and courses as GPX files.
1 From the home page, press OK to open the main menu.
2 Select Saved.
3 Select an option:
• To export all waypoints to GPX format, select Waypoints > Export to GPX.
• To export an individual course or activity to GPX format, select Courses or Activities, select a saved item,
and select Export to GPX.
Deleting Saved Data
1 From the home page, press OK to open the main menu.
2 Select Saved.
3 Select a category.
4 Select a saved item.
5 Select Delete.
Customizing the Device
Tracking Settings
From the home page, press OK to open the main menu. Select Settings > Tracking.
Send Interval: Sets the frequency at which the device records a track point and transmits it over the satellite
network.
NOTE: The Send Interval frequency affects battery life (Battery Information, page24).
Activity Recording: Sets the level of detail used in your activity recording. The High Detail option logs your
location and updates the track line more frequently in the device memory than the Standard option.
NOTE: Higher detail recordings decrease battery life (Battery Information, page24).
Auto Track: Sets the device to start tracking when you turn on the device.
Customizing the Device 17
Sounds Settings
From the home page, press OK to open the main menu. Select Settings > Sounds.
Mute All: Mutes all device tones.
Volume: Sets the device volume level.
Ring Until Read: Sets the device to ring until you read a new message. This feature is helpful if you are in a noisy
environment.
Message Rec.: Sets the tone that sounds when you receive a message.
Message Sent: Sets the tone that sounds when the you send a message.
Critical Alert: Sets the tone that sounds when the device announces a critical alert.
Power Off: Sets the tone that sounds when you turn off the device.
Map Settings
From the home page, press OK to open the main menu. Select Settings > Map.
Waypoints: Shows or hides waypoints on the map.
Waypoint Labels: Shows or hides waypoint labels on the map.
Track Points: Shows or hides track points on the map.
Messages: Shows or hides messages on the map.
Auto Zoom: Automatically sets the zoom level for optimal use of your map. When Off is selected, you must
zoom in or out manually.
Orientation: Sets the orientation of the map. The North Up option shows north at the top of the screen. The
Track Up option shows your current direction of travel at the top of the screen.
Phone Settings
From the home page, press OK to open the main menu. Select Settings > Phone.
Status: Enables Bluetooth wireless technology.
Connected Device: Displays the name of the currently connected device from the list of paired devices. This
option is available only after a device is paired.
Pair Phone: Allows you to pair your device with a compatible Bluetooth enabled smartphone. This setting allows
you to use Bluetooth connected features using the Garmin Explore app or Garmin Messenger app.
inReach Remote Settings
You can use some inReach Mini 2 features using another compatible device with ANT+
®
wireless technology,
such as the fēnix
®
watch. You can use the inReach Remote option to view incoming messages, send check-in
messages, start and stop tracking, and initiate or cancel an SOS.
From the home page, press OK to open the main menu. Select Settings > inReach Remote.
Status: Turns the inReach Remote feature on or off and allows you to access some inReach features using
another compatible device.
Device Number: Displays the device number for the ANT+ channel.
Verification: Enables user verification to communicate with a wireless device.
Verified Devices: Displays a list of verified devices that this device can wirelessly connect to.
18 Customizing the Device
System Settings
From the home page, press OK to open the main menu. Select Settings > System.
Backlight: Sets the backlight brightness and the length of time before the backlight turns off.
Compass Cal.: Allows you to calibrate the compass (Calibrating the Compass, page12).
Time: Sets the time format and time zone (Time Settings, page19).
Units: Sets the position format and units of measure for the device (Units Settings, page19).
GPS: Allows you to change the GPS setting. The GPS Only option enables the GPS satellite system. The
Multi-GNSS option enables multiple Global Navigation Satellite Systems (GNSS).
NOTE: Using multiple GNSS systems offers increased performance in challenging environments and faster
position acquisition than using GPS only. However, using multiple GNSS systems can reduce battery life
more quickly than using GPS only.
Language: Sets the text language on the device.
NOTE: Changing the text language does not change the language of user-entered data or map data.
Keyboard Language: Sets the keyboard language on the device.
Owner Info: Allows you to add owner information, such as your name. The information appears on the home
page.
USB Mode: Sets the device to use mass storage mode or Garmin mode when connected to a computer.
External Power: Automatically turns off the device when it is disconnected from external power.
Screenshots: Allows you to take a picture of the device screen.
Reset Device: Allows you to reset user data and settings (Resetting All Default Settings, page23)
Software Update: Allows you to install software updates downloaded to your device.
About: Displays the IMEI number, authorization code, software, license, and regulatory information.
Time Settings
From the home page, press OK to open the main menu. Select Settings > System > Time.
Time Format: Sets the device to show time in a 12-hour or 24-hour format.
Time Zone: Sets the time zone for the device.
Daylight Saving: Sets the device to use daylight saving time. This option is not available when Time Zone is set
to Automatic.
Units Settings
From the home page, press OK to open the main menu. Select Settings > System > Units.
Position Format: Sets the format used for geographical position coordinates and the coordinate system used by
the map (Position Format Settings, page19).
Speed/Distance: Sets the unit of measure for distance.
Wind Speed: Sets the unit of measure for wind speed.
Temperature: Sets the temperature unit of measure to Fahrenheit (°F) or Celsius (°C).
Pressure: Sets the unit of measure for pressure.
Bearing: Sets the north reference used on the compass to true or magnetic north.
Position Format Settings
NOTE: You should not change the position format or the map datum coordinate system unless you are using a
map or chart that specifies a different position format.
From the home page, press OK to open the main menu. Select Settings > System > Units > Position Format.
Format: Sets the position format in which a location reading appears.
Datum: Sets the coordinate system on which the map is structured.
Spheroid: Shows the coordinate system the device is using. The default coordinate system is WGS 84.
Customizing the Device 19
Device Information
Product Updates
On your computer, install Garmin Express
™
(www.garmin.com/express). On your phone, install the Garmin
Explore app.
This provides easy access to these services for Garmin devices:
• Software updates
• Data uploads to Garmin Explore
• Product registration
Setting Up Garmin Express
1 Connect the device to your computer using a USBcable.
2 Go to garmin.com/express.
3 Follow the on-screen instructions.
Getting More Information
You can find more information about this product on the Garmin website.
• Go to support.garmin.com for additional manuals, articles, and software updates.
• Go to buy.garmin.com, or contact your Garmin dealer for information about optional accessories and
replacement parts.
Viewing E-Label Regulatory and Compliance Information
The label for this device is provided electronically. The e-label may provide regulatory information, such as
identification numbers provided by the FCC or regional compliance markings, the IMEI number, as well as
applicable product and licensing information.
1 From the main menu, select Settings.
2 Select System.
3 Select About.
20 Device Information
Attaching the Spine Mount Adapter
1 Remove the short screw from the carabiner strap .
2 Secure the spine mount adapter over the back of the device using the long screw included with the
device.
TIP: The spine mount adapter fits over the carabiner strap. You can attach the adapter over the strap or
remove the strap.
Device Information 21
Attaching a Lanyard
1 Insert the loop of the lanyard through the slot in the device.
2 Thread the other end of the lanyard through the loop, and pull it tight.
3 If necessary, attach the lanyard to your clothing or backpack to tether it during an activity.
Locking and Unlocking the Buttons
You can lock the buttons to prevent inadvertent button presses.
1 Press to open the power menu.
2 Select Lock Buttons.
3 Press to unlock the buttons.
Device Care
NOTICE
Avoid chemical cleaners, solvents, and insect repellents that can damage plastic components and finishes.
Do not store the device where prolonged exposure to extreme temperatures can occur, because it can cause
permanent damage.
The device is water resistant to IEC Standard 60529 IPX7. It can withstand accidental immersion in 1 meter of
water for 30 minutes. Prolonged submersion can cause damage to the device. After submersion, be certain to
wipe dry and air dry the device before using or charging.
Thoroughly rinse the device with fresh water after exposure to chlorinated or salt water environments.
Cleaning the Device
1 Wipe the device using a cloth dampened with a mild detergent solution.
2 Wipe it dry.
After cleaning, allow the device to dry completely.
Troubleshooting
Maximizing Battery Life
• Reduce the backlight timeout (System Settings, page19).
• Reduce the frequency of the tracking Send Interval setting (Tracking Settings, page17).
• Use the Standard level of detail for activity recordings (Tracking Settings, page17).
• Turn off Bluetooth wireless technology (Phone Settings, page18).
• Turn off ANT+ wireless technology (inReach Remote Settings, page18).
22 Device Information
Resetting All Default Settings
Before you reset your device, you should sync your device with the Garmin Explore app to upload your activity
data.
You can reset all device settings to the factory default values.
1 From the home page, press OK to open the main menu.
2 Select Settings > System > Reset Device.
3 Select an option:
• To reset all of the device settings to the factory default values and save all user-entered information and
activity history, select Reset Default Settings.
• To reset all of the device settings to the factory default values and delete all user-entered information and
activity history, select Delete Data and Reset Settings.
My device is in the wrong language
You can change the device language selection if you have accidently selected the wrong language on the
device.
1 From the home page, press OK.
2 Scroll down to the last item in the list, and select it.
3 Scroll down to the last item in the list, and select it.
4 Scroll down to the sixth item in the list, and select it.
5 Select your language.
Charging the inReach Device
NOTICE
To prevent corrosion, thoroughly dry the USB port, the weather cap, and the surrounding area before charging or
connecting to a computer.
NOTE: The device does not charge when it is outside the approved temperature range (Specifications,
page24).
1 Lift the weather cap .
2 Plug the small end of the power cable into the charging port on the device.
3 Plug the other end of the power cable into a compatible AC power adapter.
4 Plug the AC power adapter into a standard wall outlet.
5 Charge the device completely.
Device Information 23
Saving Energy While Charging the Device
1 Connect your device to an external power source.
2 Hold the power button until the screen turns off.
The device goes into a low power, battery charging mode, and the battery gauge appears.
3 Charge the device completely.
Specifications
Battery type Rechargeable, built-in lithium-ion battery
Battery capacity 1,250mAh
Water rating IEC 60529 IPX7
1
Operating temperature range From -20° to 60°C (from -4° to 140°F)
Charging temperature range From 0° to 45°C (from 32° to 113°F)
Wireless frequency/protocol
1.6GHz @ 31.8dBm maximum
2.4 GHz @ -5.8 dBm maximum
EU SAR (limb) 0.79 W/kg simultaneous
EU SAR (body) 0.78 W/kg simultaneous
Battery Information
The actual battery life depends on your device settings and if you are recording a high detail activity or tracking
at a high interval. For optimal battery life, ensure you have a clear view of the sky.
Mode Battery Life
10-minute tracking send interval and high detail activity recording
Full sky view: Up to 5 days
Moderate tree cover: Up to 2 days
Default mode with 10-minute tracking send interval and standard activity
recording
Full sky view: Up to 14 days
Moderate tree cover: Up to 4 days
30-minute tracking send interval with standard activity recording
Full sky view: Up to 30 days
Moderate tree cover: Up to 10 days
Turned off One year
1
The device withstands incidental exposure to water of up to 1m for up to 30min. For more information, go to www.garmin.com/waterrating.
support.garmin.com
GUID-802DEF62-EBB2-463C-8C51-C58FB29F89E3 v7September 2024
