SLS-CR01-2L-BK
Slushie Machine
Can make slushie, soft ice cream, spiked
slushie, cold drink and milkshakes.
Please make sure to read the enclosed safety
instructions prior to using your unit.
Please read the warning instructions carefully before use. Improper
operation will damage the machine and invalidate the warranty.
1.When using electrical appliances, it is essential to follow basic safety
measures to reduce the risk of
fire, electric shock, and injury.
2.Ensure that the voltage matches the rated voltage range and that the
socket is properly grounded. If the power cord is damaged, it must be
replaced by the manufacturer or a qualified service agent to avoid danger.
3.Do not use this product outdoors; it should only be used indoors. Do not
tilt the product or lean it at an angle of 45 degrees.
4.To prevent electric shock, do not splash water on the wires, plug, or
ventilation ports, nor should you submerge the appliance in water or other
liquids.
5.Unplug the appliance after use or before cleaning. Do not use accessories
not recommended by the manufacturer.
6.Do not place the machine near heat sources, hot plates, or stoves.
Maintain a distance of more than20 centimeters from other objects to
ensure good heat dissipation.
7.Avoid frequently pressing the power button switch (ensure an interval of at
least 5 minutes) to prevent damaging the compressor.
8.Do not insert metal pieces or other electrical devices into the appliance to
avoid fire hazards and short circuits.
9.Do not turn on the power until the mixing blade or ice cream bucket is
properly installed. When removing ice cream, avoid hitting the bucket or
its edges to prevent damage.
10.The initial temperature of food materials should be 8±2°C. Do not pre-
freeze ingredients in the refrigerator, as this can easily cause the mixing
blade to jam before the ice cream is formed. Refrigerating ingredients can
save time, but it is not recommended to using ingredients below 5°C.
11.Do not clean with detergent or hard objects. Before cleaning,
maintaining, or filling the device, you must unplug it.
12.Mixing barrel should not be fuddled with and removed during operation
Should not be removed the barrel when there is liquid inside, otherwise
the ingredients inside the barrel will flow out
13.Make sure the handle is at close position before pouring liquid
ingredients
14.It is strictly forbidden to insert forks, chopsticks, cutlery and other foreign
objects into the barrel
15. When working, the lid must be closed.
16. It is strictly forbidden to insert forks, chopsticks, cutlery and other foreign
objects into the mixing barrel.
17. Make sure the handle is at close position before pouring liquid
IMPORTANT SAFEGUARDS
ingredients
18. When pouring liquid ingredients, please pour them gently into the
feeding hole to avoid splashing or overflowing
19. Add liquids only, do not add ice, solids or hot ingredients, otherwise will
damage to the machine
20. Keep unit running during dispensing.
21. Keep the machine at least 20 cm away from other objects to ensure
good heat dissipation.
22. The mixing blade and mixing bucket can be cleaned in a dishwasher,
However, it is not advisable to use the heating and drying process for
cleaning.
23. In the working state, the “Menu” button does not work. Press and hold
the knob button for 2 seconds to exit the work, and then press Menu
again to select other menus and then press the knob button to start
24. Before using the appliance for the first time, please wait 2 hours after
positioning it, and keep the transparent lid open for at least 2 hours
25. To avoid contamination of food, please respect the following
instructions:
– Opening the door for long periods can cause a significant increase of
the temperature in the compartments of the appliance.
– Clean regularly surfaces that can come in contact with food and
accessible drainage systems.
– Clean water tanks if they have not been used for 48 h; flush the water
system connected to a water supply if water has not been drawn for 5
days.
– If the refrigerating appliance is left empty for long periods, switch off,
defrost, clean, dry, and leave the door open to prevent mould
developing within the appliance.
26.Children under 12 years old, as well as individuals with physical,
sensory, or mental disabilities who lack experience or knowledge, should
use this product under adult supervision or guidance and
understand the associated hazards. Cleaning and maintenance should
not be performed by unsupervised children. Children should be
supervised to ensure they do not play with the product.
27.This product is suitable for household and similar uses, such as
employee kitchens in stores, offices, and other work environments;
farmhouses, guesthouses, motels, and other residential environments
for non-retail purposes.
28.Compressor start protection function: Due to the inherent characteristics
of the compressor, it is not allowed to restart immediately after
shutdown; a delay of 3 minutes is required before restarting.
Warning:
Ensure that the product's exterior or air intake and exhaust ports are
unobstructed. Do not use mechanical devices or other methods to
accelerate the defrosting process unless permitted by the manufacturer;do
not damage the refrigeration system pipes.
Warning:
Do not use electrical appliances in the food storage compartment of the
device unless they are types recommended by the manufacturer.
Disaster warning sign: Be aware of the fire hazard.
SAFETY NOTES
In order to use the installation instructions safely and correctly, pay attention to the
relevant precautions.
WARNING: Indicates a situation that could result in death or serious injury.
CAUTION: Indicates a situation that could result in personal injury or property damage.
MEANING OF SYMBOLS: Indicates that this is prohibited.
Indicates a reminder to pay attention to the operation.
█
It is forbidden to disassemble, repair and
modify the body by itself, which may
cause fire and electric shock.
█
Clean the power plug regularly. Plug stains and humidity
can cause insulation failures and fires.
█ Power must be cut off during repairs. Improper
operation can lead to electric shock.
█ The body should not be wet or drenched. Danger of
electric
shock or fire.
█ Do not allow children to touch it during operation.
To avoid electric shock and injury to children.
█ Do not open the lid during operation, and do not put
spoons, curettes and other ice-making utensils.
█
Do not touch the power plug when your hands
are
wet.can cause electric shock.
█ Cannot operate when the rotating parts
are exposed can cause injury.
Please do not move during operation.
Can cause injury.
Do not use in unstable places.
Can cause injury.
Do not touch sharp metal.
Will cause malfunction.
Cover installation and removal cannot be
performed during operation. Can cause injury.
The machine part cannot be washed
in water. Will cause malfunction.
If the power cord is damaged, it must be replaced by the
manufacturer or its maintenance department or similar
professionals in order to avoid danger.
When pulling the power, hold the insulating
part of the power plug, do not pull the power
cord directly.Shorted or broken wires can cause
electric shock or fire.
Do not damage the insulation part of the power cord and
the power plug,and do not tie the power cord, stretch it,
press heavy objects, or heat it at high temperatures.
Shorted or broken wires can cause electric shock or fire.
Do not use other power sources other than
220-240VAC power. It will cause fire and electric
shock. Do not use it when the plug is unstable.
The power cord must be unplugged when not in use.
Avoid electric shock and fire caused by abrasion of
insulating glue
CAUTION
WARNING
TIPS & TRICKS
DO NOT add hot ingredients, ice, or solid ingredients like fruit, ice
cream, or frozen fruit.
All ingredients must contain at least 6% sugar. If the sugar content
is below 6%, syrup can be added or the gear can be lowered.
Using ingredients without sugar or with a sugar content below 6%
can damage the machine.
When using the SPIKED SLUSHIE program, all premade inputs
must contain 2.8% to 16% alcohol.
For best results, chill liquid(s) before adding to the unit.
(Refrigeration temperature: 5-8°C), but can‘t freeze the liquid.
For your ideal texture, use the Temperature Level Control setting
to adjust. See page: PRESET DESCRIPTION
If the ingredients cannot be extruded by pulling the handle, some of
the original liquid can be added as needed.
To ensure the optimal taste of the food, the machine is programmed
to maintain coldness for 2 hours by default. If the food hasn't been
consumed within 2 hours of being kept cold, it is recommended to
transfer all the remaining food into a
container and freeze it in the refrigerator.
Please do not use the squeeze-out cover except when using the
ice cream function, as it may affect the extrusion. Please keep
your squeeze-out cover safe.
When extruding ice cream, using the extrusion function can make
the process faster and more thorough.
After extended cold storage, the taste of ice cream and milkshake
will deteriorate, resulting in more accumulation and residue. It is
recommended to consume them or squeeze out the remaining
within half an hour of cold storage to maintain the best taste.
The mimimum input volume/weight for slushies,soft incream, cold drink and
milkshakes is 650ml(g).
The maximum input volume for slushies is 1200ml
The maximum input weight for soft ice cream is 750ml(g).The maximum input
volume for cold drinks is 1600ml.
SPECIFICATIONS：
Product Name
Slushie Machine
Rated Voltage
220-240V~ 50Hz
Product Model
LS-CR01-2L-BK
Capacity
2.0L(Max Line 1.2L))
Dimensions
438x222x442mm
Noise
≤65dB
PRODUCT PART DESCRIPTION:
1.Egg cone storage rack
4.Evaporator
7.Removable drip tray
10.Squeeze-out cover
13.Handle fixing pin
2.Main body
5.Stirring blade
8.Mixing barrel cover
11.Movable extrude head
14.Multi-functional
cleaning brush
3.Gear selection knob
6.Double-layer mixing barrel
9.Removable decorative cover
12.Handle
15.Sealing ring
16. Menu button
※ The squeeze-out cover is only for the soft ice cream function,
please keep your squeeze-out cover safe. Do not use the squeeze-
out cover when using other functions to avoid affecting the
extrusion.
※ Press and hold the "Gear selection knob" 2 seconds to exit the
current program and enter the program/gear selection state, press
the “Menu” button to select program, turn the Gear selection knob
to select hardness and then press the Gear selection knob to start.
※ Do not press the egg cone storage rack too hard in case it
broken.
USING SLS-CR01-2L-BK
1.Plug in the power supply. The buzzer will sound once, the display screen
and indicator lights will all turn on. After 1 second, the machine will enter the
standby state. The indicator light corresponding to "slushie" will turn on, and
the screen will display "LE:04" as the default gear.
2.If there is no operation for 30 seconds, the machine will beep once and
automatically enter the holographic screen state, then return to the standby
state. Press any button to wake up the machine, and the screen will display
"LE:04". In any state, long-press the "Level" button for 2 seconds to exit the
current working mode and enter the standby mode.
3.Users can select the program (slushie, soft ice cream, spiked slushie, cold
drink, milkshake, extrude/clean) through the "Menu" button. The
corresponding indicator light will turn on.
4. Press the menu button to select the program for the cold drink you want
to make. You can also rotate the Gear selection knob to adjust the softness
and hardness at different gears. Then press the Gear selection knob to start
the machine.
5.When the screen automatically displays "COOL", the machine will emit
three beeps and then enter the cold-keeping state. The cold-keeping time is
set to 2 hours by default. After that, the corresponding function indicator
light will turn off, and the machine will automatically shutdown.
6.When the machine enters the cold-keeping state and the screen displays
"COOL", it indicates that the preset program has been completed. Pull the
handle down to extrude the food. When extruding ice cream, attach the
squeeze-out cover, which can extrude the food quickly, more thoroughly,
and with a beautiful shape.
7.Users can press the "Menu" button to select the "Extrude/clean" function,
and then press the "Level" rotary knob to confirm. The machine will enter
the quick cleaning state. The cleaning time is set to 5 minutes by default.
USING SLS-CR01-2L-BK
1. Power on.
2. Open the cover on
the top of the vessel.
3. Add liquid(s) through
The easy-fill port and
close the cover.
4. Press Menu button
or gear selection knob
to wake up the
machine if the LED
display is off.
5. Press the menu button to select the program
you want to make cold drinks. The preset
program will show the default gear. If necessary,
you can rotate the gear selection knob to adjust
the gear according to your needs to get the ideal
taste, then press the gear selection knob to start
the machine.
6.Temperature Control Setting LEDs will pulse
while frozen drink is freezing to your preset
level. Once frozen drink reaches the desired
level, unit will beep three times. Unit will
continue running to keep your frozen drink at
the ideal temperature and be ready to
dispense.
7. Once the cold drink is prepared,
pull the handle to dispense the cold
drink and enjoy it promptly.
NOTE:
• Stopping the unit also stops the blade and cooling process. You will need to keep the unit running
to dispense contents.
• Temperature Level Control Setting LEDs will pulse while frozen drink is freezing to your set
temperature level. Once frozen drink reaches the desired temperature, unit will beep three times.
Unit will continue running to keep your frozen drink at the ideal temperature and be ready to
dispense.
• Creating drinks can take up to 15‒60 minutes depending on ingredients,
volume, and starting temperature.
Make sure the
handle is at
close position
before add
liquid
ingredients
PRESET DESCRIPTION
Panel Function Description
PRESET DEFAULT DEFAULT WORKING GEAR / ADJUSTABLE LEVEL RANGE
Each preset will start at a default/optimal level for ideal texture. If desired,
adjust the level for your perfect frozen drink texture.
Guide to Using Preset Program
For the specific usage of ingredients, please refer to the subsequent recipe content
PRESET
INGREDIENTS
650ML
1000ML
1200ML
1600ML
slushie
Cola slushie
LE : 02
LE : 04~05
LE : 06~07
/
Pepsi slushie
LE : 01
LE : 02
LE : 03
/
High sugar slushie
Sugar content>11%
LE : 04
LE : 05
LE : 06
/
soft ice
cream
Regular
ice cream
650g LE : 01 - LE : 04
750g LE : 04 - LE : 06
/
/
spiked
slushie
Conventional
alcohol slushie
LE : 03 - LE : 04
LE : 05 - LE : 06
LE : 07 - LE : 08
/
cold drink
Regular
cold drinks
LE : 01 - LE : 02
LE : 03
LE : 04
LE : 05
milkshake
Regular
milkshake
LE : 02
LE : 03
LE : 04
/
※ The squeeze-out cover is only for soft ice cream function. When using other functions,
※ It is not suitable for making sugar-free or low-sugar cold drinks. Using ingredients that
are sugar-free or have a sugar content of less than 6% can damage the machine.
※ Press and hold the "Gear selection knob" 2 seconds to exit the current program and enter the
program/gear selection state.
slushie
LE:04
1-9 If you like to suck smoothies, you can choose a low level. If you like
to chew smoothies, you can choose a high level.
soft ice
cream
LE:04
1-6: If you like softer icecream, you can choose a low level. If you
like harder icecream, you can choose a high level.
spiked
slushie
LE:04
1-8: If you like to suck smoothies, you can choose a low level. If you like
to chew smoothies, you can choose a high level.
cold drink
LE:02
1-6level
milkshake
LE:03
1-4level
extrude
/clean
/
Default: 5min
ASSEMBLY INSTRUCTIONS
Keep unit upright for at least 2 hours before first use
1.Ensure all parts are fully cleaned
and the motor base is level on a flat,
solid surface.
3.Install the stirring
blade on the metal
burrel. Make sure the
bottom of the stirring
blade is completely.
5.Put the push-pull
rod into the hole and
install the latch
sleeve to tighten it.
4.Lock the mixing
barrel onto the
machine body, rotate
it clockwise to lock it,
and then you can
start working.
2.Insert the drip tray by the
arrow direction in front of the
motor base until it clicks into
place.
INSTALLATION OF EXTRUDE
1. Use the cleaning brush’s handle
to push the movable extrude head to
the appropriate position.
3. Insert the handle into the 4. Insert the fixing pin.
movable extrude assembly.
5. Keep the machine at least
20 cm away from other objects
to ensure good heat
dissipation.
2. Rotate the decorative
cover to install on the
mixing barrel.
CLEAN PROCEDURE INSTRUCTIONS
In this mode, the stirring blades will continue to rotate, without cooling,
to clean the unit. After using the clean procedure, wash all parts by
hand or in a dish washer to fully clean the unit after each use.
The mixing barrel and the Stirring blade can be cleaned in a
dishwasher, but it is not suitable for cleaning using the heating and
drying program.
1. Dispense any remaining frozen drink.
2. Press and hold the Menu knob to exit the current program, and
press the menu knob to again enter the "Clean" program.
3. Add warm water up to the barrel's max fill line.
4. At this time, the stirring blades will continue to rotate to clean the
inner wall of the mixing barrel.
5. The "clean" program works for 5 minutes by default. After the
"clean" program is completed, you can pull the push-pull rod to drain
all the water in the mixing barrel. During the
working period, you can repeatedly add clean water and drain it for
repeated cleaning.
6. Press and hold the Menu knob to exit this function.
NOTE:
1.This water will dispense quickly.
Ensure
you use a large cup or bowl to
capture it.
2.Please ensure to use the cleaning
function during cleaning, as using
other functions
may damage the machine.
For more detailed information on cleaning parts after using the
Clean program, see the next page.
DISASSEMBLY & CLEANING
The mixing barrel and the Stirring blade can be cleaned in a
dishwasher, but it is not suitable for cleaning using the heating
and drying program.
To achieve the best cleaning effect, please use the "clean "
program before disassembling all parts.
multi-
function
cleaning
brush
2.Use the accessory
(multi-function cleaning brush)
to push out the active extrusion
head for cleaning, and then use
the accompanying cleaning brush
to clean the extrusion channel
3.Rotate the mixing
barrel counterclockwise,
then gently remove the
mixing barrel from the
main unit and set it aside
4.Remove the mixing
blade from the metal
bucket, and then
remove the sealing
ring from the fixing
ring of the metal
bucket.
5.Slide the removable
drop tray out of the
main unit and clean
the parts with wet
soapy water. Use
the flat brush clean
the food remains
on evaporator
1.Pull out the pin, remove the
extrude handle, and rotate to
remove the ice cream
decorative cover.
12
Recipes
COLA SLUSHIE INGREDIENTS
650ml COLA
Gear: LE:02
1000ml COLA
Gear: LE:04-LE:05
1200ml COLA
Gear: LE:06-LE:07
1. Stir whole milk, cream, vanilla extract, granulated sugar, caramel syrup and
1.pour into a mixing bucket.
2. Press the menu button to select the "SLUSHIE" gear. The program will start from the
default gear. At this time, the screen displays "LE:04".
※ if you need to adjust the taste of the finished product, rotate the knob to select the
gear.
3. When the cold drink reaches the preset gear, the screen will automatically
display "COOL", the machine will beep 3 times, then the machine enters the cold
protection state, pull the handle to squeeze out the soft ice cream and enjoy it
in time.
1. Pour the Coca-Cola into a mixing bucket.
2. Press the menu button to select the "SLUSHIE" gear. The program will start from
the default gear. At this
time, the screen displays "LE:04". ※ if you need to adjust the taste of the
finished product, rotate the knob to select the gear.
3. When the cold drink reaches the preset gear, the
screen will automatically display "COOL", the machine will beep 3 times, then the
machine enters the coldprotection state, pull the handle to squeeze out the soft ice
cream and enjoy it in time.
CARAMEL MILKSHAKE SLUSHIE INGREDIENTS
2 SERVINGS
250ml whole milk
120ml cream
2ml vanilla extract
15ggranulated sugar
40gcaramel syrup
Gear: LE:03
500ml whole milk
240ml cream
4ml vanilla extract
30g granulated sugar
80gcaramel syrup
Gear: LE:04-LE:05
600ml whole milk
300ml cream
5ml vanilla extract
35ggranulated sugar
100gcaramel syrup
Gear: LE:06-LE:07
4 SERVINGS
3 SERVINGS
4 SERVINGS
3 SERVINGS
2 SERVINGS
SLUSHIE
13
Recipes
ORANGE JUICE SLUSHIE
INGREDIENTS
650ml orange juice
Gear: LE:03
1000ml orange juice
Gear: LE:04-LE:05
1200ml orange juice
Gear: LE:06-LE:07
1. Pour the orange juice into a mixing bucket.
2. Press the menu button to select the "SLUSHIE" gear. The program will start from
the default gear. At this time, the screen displays "LE:04".
※ if you need to adjust the taste of the finished product, rotate the knob to select the
gear.
3. When the cold drink reaches the preset gear, the screen will automatically display
"COOL", the machine will beep 3 times, then the machine enters the cold protection
state, pull the handle to squeeze out the soft ice cream and enjoy it in time.
GRAPE JUICE SLUSHIE
INGREDIENTS
650ml grape juice
Gear: LE:03
1000ml grape juice
Gear: LE:04-LE:05
1200ml grape juice
Gear: LE:06-LE:07
1. Pour the grape juice into a mixing bucket.
2. Press the menu button to select the "SLUSHIE" gear. The program will start from
the default gear. At this time, the screen displays "LE:04".
※ if you need to adjust the taste of the finished product, rotate the knob to select the
gear.
3. When the cold drink reaches the preset gear, the screen will automatically display
"COOL", the machine will beep 3 times, then the machine enters the cold
protection state, pull the handle to squeeze out the soft ice cream and enjoy it in
time.
4 SERVINGS
3 SERVINGS
2 SERVINGS
4 SERVINGS
3 SERVINGS
2 SERVINGS
SLUSHIE
14
Recipes
MANGO SLUSHIE INGREDIENTS
125g Mango puree
155ml milk
155ml drinking water
40ggranulated sugar
Gear: LE:03
250g Mango puree
310ml milk
310ml drinking water
75ggranulated sugar
Gear: LE:04-LE:05
300g Mango puree
375ml milk
375ml drinking water
90ggranulated sugar
Gear: LE:06-LE:07
1. Stir Mango puree, milk, drinking water, granulated sugar and pour into a
mixing bucket.
2. Press the menu button to select the "SLUSHIE" gear. The program will start from
the default gear. At this time, the screen displays "LE:04".
※ if you need to adjust the taste of the finished product, rotate the knob to select the gear.
3. When the cold drink reaches the preset gear, the screen will automatically
display "COOL", the machine will beep 3 times,then the machine enters the cold
protection state, pull the handle to squeeze out the soft ice cream and enjoy it in time.
WATERMELON SLUSHIE INGREDIENTS
250ml Fresh watermelon
juice
200ml drinking water
40ggranulated sugar
Gear: LE:03
500ml Fresh watermelon
juice
400ml drinking water
80ggranulated sugar
Gear: LE:04-LE:05
600ml Fresh watermelon
juice
480ml drinking water
95ggranulated sugar
Gear: LE:06-LE:07
1. Stir Fresh watermelon juice, drinking water, granulated sugar and pour into a mixing
bucket.
2. Press the menu button to select the "SLUSHIE" gear. The program will start from the
default gear. At thistime, the screen displays "LE:04".
※ if you need to adjust the taste of the finished product, rotate the knob to select the gear.
3. When the cold drink reaches the preset gear, the screen will automatically display
"COOL", the machine will beep 3 times, then the machine enters the cold protection
state, pull the handle to squeeze out the soft ice cream and enjoy it in time.
4 SERVINGS
3 SERVINGS
2 SERVINGS
4 SERVINGS
3 SERVINGS
2 SERVINGS
SLUSHIE
15
Recipes
CLASSIC ICE CREAM INGREDIENTS
160ml whole milk
160ml cream
50ggranulated sugar
Gear: LE:01-LE:04
325ml whole milk
325ml cream
100ggranulated sugar
Gear: LE:04-LE:06
1. Stir whole milk, cream, granulated sugar and pour into a mixing bucket.
2. Press the menu button to select the "SOFT ICE
CREAM" gear. The program will start from the default gear. At this time, the screen
displays "LE:04".
※ if you need to adjust the taste of the finished product, rotate the knob to select the gear.
3. When the cold drink reaches the preset gear, the screen will automatically
display "COOL", the machine will beep 3 times, then the machine enters the cold
protection state, pull the handle to squeeze out the soft ice cream and enjoy it
in time.
VANILLA ICE CREAM INGREDIENTS
300ml whole milk
60ml cream
50ggranulated sugar
8ml vanilla extract
Gear: LE:01-LE:04
600ml whole milk
120ml cream
100ggranulated sugar
15ml vanilla extract
Gear: LE:04-LE:06
1. Stir whole milk, cream, sugar, vanilla and pour into the mixing bucket.
2. Press the menu button to select the "SOFT ICE
CREAM" gear. The program will start from the default gear. At this time, the screen
displays "LE: 04".
※ if you need to adjust the taste of the finished product, rotate the knob to select the gear.
3. When the cold drink reaches the preset gear, the screen will automatically
display "COOL", the machine will beep 3 times, then the machine enters the cold
protection state, pull the handle to squeeze out the soft ice cream and enjoy it
in time.
3 SERVINGS
2 SERVINGS
3 SERVINGS
2 SERVINGS
SOFT ICE CREAM
SOFT ICE CREAM
STRAWBERRY ICE CREAM INGREDIENTS
75gstrawberry puree
125ml whole milk
170ml cream
30ggranulated sugar
Gear: LE:01-LE:04
150gstrawberry puree
250ml whole milk
340ml cream
60ggranulated sugar
Gear: LE:04-LE:06
1. Stir fresh strawberry puree, whole milk, cream and sugar and pour into the mixing
bucket.
2. Press the menu button to select the "SOFT ICE CREAM" gear, the program will
start from the default gear, when the screen shows "LE: 04".
※ if you need to adjust the taste of the finished product, rotate the knob to select the
gear.
3. When the cold drink reaches the preset gear, the screen will automatically display
"COOL", the machine will beep 3 times, then the machine enters the cold protection
state, pull the handle to squeeze out the cold drink and enjoy it in time.
MATCHA ICE CREAM INGREDIENTS
2 egg yolks
135ml whole milk
160ml cream
40ggranulated sugar
5g matcha powder
Gear: LE:01-LE:04
4 egg yolks
270ml whole milk
320ml cream
80g granulated sugar
10g matcha powder
Gear: LE:04-LE:06
1. Heat the milk up to about 60 degrees Celsius.
2. Beat the egg yolk until the sugar has melted.
3. Add the sugary, egg yolk to the hot milk, heat the milk and stir well, then boil until the milk is slightly;
cool to about 5 degrees.
4. Beat the light cream until sticky (milky).
5. Then pour the cooled egg milk, whipped cream and Matcha powder into the blender and stir evenly
(the dry Matcha powder is difficult to dissolve in the slurry, and the machine is needed to assist in mixing).
6. Pour the evenly mixed stock mixture into the mixing bucket.
7. Press the menu button and select "SOFT ICE CREAM" gear. The program will start from the default
gear. The screen displays "LE:04".
※ if you need to adjust the taste of the finished product, rotate the knob to select the gear.
8. When the cold drink reaches the preset gear, the screen will automatically display "COOL", the
machine will beep 3 times, then the machine enters the cold protection state, pull the handle to squeeze
out the soft ice cream and enjoy it in time.
3 SERVINGS
2 SERVINGS
3 SERVINGS
2 SERVINGS
Recipes
Recipes
STRAWBERRY MARGARITA SLUSHIE INGREDIENTS
200ml strawberry
margarita mix
135ml drinking water
70ml tequila
20ml Arabic syrup
Gear: LE:03−LE:04
400ml strawberry
margarita mix
270ml drinking water
135ml tequila
40ml Arabic syrup
Gear: LE:04-LE:05
480ml strawberry
margarita mix
325ml drinking water
160ml tequila
50ml Arabic syrup
Gear: LE:06-LE:07
1. Stir Strawberry margarita mix, drinking water, Rum, Arabic syrup and pour into a
mixing bucket.
2. Press the menu button to select the "SPIKED SLUSHIE" gear. The program will
start from the default gear. At this time, the screen displays "LE:04".
※ if you need to adjust the taste of the finished product, rotate the knob to select the
gear.
3. When the cold drink reaches the preset gear, the screen will automatically
display "COOL", the machine will beep 3 times,then the machine enters the cold
protection state, pull the handle to squeeze out the soft ice cream and enjoy it in time.
STRAWBERRY DAQUIRI SLUSHIE INGREDIENTS
200ml strawberry
daquiri mix
135ml drinking water
70ml Rum
20ml Arabic syrup
Gear: LE:03−LE:04
400ml strawberry
daquiri mix
270ml drinking water
135ml Rum
40ml Arabic syrup
Gear: LE:04-LE:05
480ml strawberry
daquiri mix
325ml drinking water
160ml Rum
50ml Arabic syrup
Gear: LE:06-LE:07
1. Stir strawberry daquiri mix, drinking water, Rum, Arabic syrup and pour into a
mixing bucket.
2. Press the menu button to select the "SPIKED SLUSHIE" gear. The program will
start from the default gear. At this time, the screen displays "LE:04".
※ if you need to adjust the taste of the finished product, rotate the knob to select
the gear.
3. When the cold drink reaches the preset gear, the screen will automatically
display "COOL", the machine will beep 3 times, then the machine enters the cold
protection state, pull the handle to squeeze out the soft ice cream and enjoy it
in time.
4 SERVINGS
3 SERVINGS
2 SERVINGS
4 SERVINGS
3 SERVINGS
2 SERVINGS
SLUSHIE
Recipes
PRE-MIXED COCKTAIL SLUSHIE INGREDIENTS
500ml Sparkling cocktails
Gear: LE:03-LE:04
1000ml Sparkling cocktails
Gear: LE:05-LE:06
1200ml Sparkling cocktails
Gear: LE:07-LE:08
1. Pour the sparkling cocktails into a mixing bucket.
2. Press the menu button to select the "SPIKED SLUSHIE" gear. The program will
start from the default gear. At this time, the screen displays "LE:04".
※ if you need to adjust the taste of the finished product, rotate the knob to select the
gear.
3. When the cold drink reaches the preset gear, the screen will automatically display
"COOL", the machine will beep 3 times, then the machine enters the cold protection
state, pull the handle to squeeze out the soft ice cream and enjoy it in time.
4 SERVINGS
3 SERVINGS
2 SERVINGS
SLUSHIE
Recipes
ORANGE COLD DRINK INGREDIENTS
75gorange pulp puree
325ml drinking water
40ggranulated sugar
Gear: LE:01-LE:02
150g orange pulp puree
750ml drinking water
80ggranulated sugar
Gear: LE:03
180g orange pulp puree
900ml drinking water
100ggranulated sugar
Gear: LE:04
1. Stir orange pulp puree, pure water, granulated sugar and pour into a mixing
bucket.
2. Press the menu button to select the "COLD DRINK" gear. The program will start
from the default gear. At this time, the screen displays "LE:02".
※ if you need to adjust the taste of the finished product, rotate the knob to select the gear.
3. When the cold drink reaches the preset gear, the screen will automatically
display "COOL", the machine will beep 3 times, then the machine enters the cold
protection state, pull the handle to squeeze out the soft ice cream and enjoy it in time.
COCONUT COLD DRINK INGREDIENTS
100g coconut pulp puree
350ml coconut water
40ggranulated sugar
Gear: LE:01-LE:02
200g coconut pulp puree
700ml coconut water
80ggranulated sugar
Gear: LE:03
240g coconut pulp puree
840ml coconut water
100ggranulated sugar
Gear: LE:04
1. Stir coconut pulp puree, coconut water, granulated sugar and pour into a mixing
bucket.
2. Press the menu button to select the "COLD DRINK" gear. The program will start
from the default gear. At this time, the screen displays "LE:02".
※ if you need to adjust the taste of the finished product, rotate the knob to select
the gear.
3. When the cold drink reaches the preset gear, the screen will automatically
display "COOL", the machine will beep 3 times, then the machine enters the cold
protection state, pull the handle to squeeze out the soft ice cream and enjoy it in
time.
4 SERVINGS
3 SERVINGS
2 SERVINGS
4 SERVINGS
3 SERVINGS
2 SERVINGS
COLD DRINK
Recipes
ARABIC SYRUP MILKSHAKE INGREDIENTS
400ml whole milk
80ml cream
20ml Arabic syrup
10ml vanilla extract
Gear: LE:02
800ml whole milk
160ml cream
40ml Arabic syrup
20ml vanilla extract
Gear: LE:03
960ml whole milk
200ml cream
50ml Arabic syrup
24ml vanilla extract
Gear: LE:04
1. Stir milk, cream, Arabic syrup, vanilla extract and pour into a mixing bucket. 2.
Press the menu button to select the "MILKSHAKE" gear. The program will
start from the default gear. At this time, the screen displays "LE:03".
※ if you need to adjust the taste of the finished product, rotate the knob to select
the gear.
3. When the cold drink reaches the preset gear, the screen will automatically
display "COOL", the machine will beep 3 times,then the machine enters the cold
protection state, pull the handle to squeeze out the soft ice cream and enjoy it
in time.
AMERICANO MILKSHAKE INGREDIENTS
315ml sugar-free
black coffee
80ml whole milk
80ml cream
20ml Arabic syrup
10ml vanilla extract
Gear: LE:01-LE:02
630ml sugar-free
black coffee
160ml whole milk
160ml cream
40ml Arabic syrup
20ml vanilla extract
Gear: LE:03
760ml sugar-free
black coffee
200ml whole milk
200ml cream
50ml Arabic syrup
24ml vanilla extract
Gear: LE:04
1. Stir sugar-free black coffee, milk, cream, Arabic syrup, vanilla extract and pour
into a mixing bucket.
2. Press the menu button to select the "MILKSHAKE" gear. The program will start
from the default gear. At this time, the screen displays "LE:03".
※ if you need to adjust the taste of the finished product, rotate the knob to select
the gear.
3. When the cold drink reaches the preset gear, the screen will automatically
display "COOL", the machine will beep 3 times, then the machine enters the cold
protection state, pull the handle to squeeze out the soft ice cream and enjoy it in
time.
4 SERVINGS
3 SERVINGS
2 SERVINGS
4 SERVINGS
3 SERVINGS
2 SERVINGS
COLD DRINK
X
X
X
X
Composition and Content Table of Toxic and Hazardous Substances:
To meet the requirements of the 'Administrative Measures for the Restriction
of Hazardous Substances in Electrical and Electronic Products', the following
provides the names of electrical product components and information
regarding the potentially hazardous substances they may contain.
Component
Name
Content of toxic and hazardous substances
Pb
Hg
Cd
Cr6+
PBB
PBDE
Plastic parts
Metal parts
Compressor
Circuit board
Power line
Packaging
" " indicates that the content of the hazardous substance in all homogeneous materials of
the component is below the limit requirements specified in GB/T 26572-2011 .
" X " indicates that the content of the hazardous substance in at least all homogeneous materials
of the component exceeds the limit requirements specified in GB/T 26572-2011 due to
existing technology and process limitations. In the table above, components marked with
"X" comply with the EU RoHS 2 .0 regulation - Regulation (EU) 2011/65/EU on the restriction
of the use of
certain hazardous substances in electrical and electronic products in the EU.
Environmentally friendly lifespan of electronic information products:
Note: All electrical and electronic products sold in China must be marked with
an eco-friendly usage
duration label. The eco-friendly usage duration indicated on the certification
label refers to the usage duration under normal usage conditions and
temperature, excluding consumables such as batteries.
Waste disposal:
Correct disposal of waste machinery
This sign indicates that this product should not be disposed of together with other
household waste. To prevent potential harm to the environment or human health,
it is necessary to recycle responsibly to maximize material reuse. To return your
used electrical appliances, please use the return and recycling system or contact the
seller of this product. They can recycle and reuse this product.
