Model PB-D-26
6L Compressor Dehumidier
IMPORTANT INSTRUCTIONS
- RETAIN FOR FUTURE USE
Instruction Manual
2 of 16 | English English | 3 of 16
CONTENTS
Safety Instructions...........................................................................Page 3
Specic Information Regarding R290 Refrigerant Gas .....Page 6
Symbols Explained ..........................................................................Page 7
Specication ...................................................................................... Page 7
Parts ......................................................................................................Page 8
Assembly.............................................................................................Page 8
Operating Instructions ...................................................................Page 8
Defrosting.......................................................................................... Page 10
Setting up Continuous Drainage ............................................. Page 10
Cleaning, Maintenance and Storage ...................................... Page 11
Recycling and Disposal ............................................................... Page 13
EN
Thank you for choosing to purchase a product from Pro Breeze. Please read the entire manual
carefully prior to rst use and keep in a safe place for future reference.
SAFETY INSTRUCTIONS
--
PLEASE READ AND SAVE THESE IMPORTANT SAFETY
INSTRUCTIONS.
When using electrical appliances, basic safety precautions
should always be followed to reduce the risk of re, electric
shock, and injury to persons, including the following:
WARNING: TO AVOID THE RISK OF ELECTRICAL SHOCK,
FIRE OR INJURY TO PEOPLE, ALWAYS TURN THE APPLIANCE
OFF, UNPLUG THE POWER CORD FROM THE ELECTRICAL
OUTLET AND EMPTY THE WATER TANK BEFORE HANDLING,
CLEANING OR SERVICING THE APPLIANCE.
• Use this dehumidier only as described in this manual.
Any other use not recommended by the manufacturer
may cause re, electric shock, or injury to person.
• Always unplug the dehumidier when not in use.
• Keep the dehumidier out of reach of children and pets.
• Do not leave children alone or unattended in the area
where the dehumidier is in use.
• Children shall not play with the dehumidier.
• Cleaning and user maintenance shall not be made by
children without supervision.
• Dispose of water held by the dehumidier. This water is
not drinkable.
• This dehumidier can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way
and understand the hazards involved.
• Never leave the dehumidier unattended while in use.
6L COMPRESSOR DEHUMIDIFIER
MODEL PB-D-26
2 of 16 | English English | 3 of 16
CONTENTS
Safety Instructions...........................................................................Page 3
Specic Information Regarding R290 Refrigerant Gas .....Page 6
Symbols Explained ..........................................................................Page 7
Specication ...................................................................................... Page 7
Parts ......................................................................................................Page 8
Assembly.............................................................................................Page 8
Operating Instructions ...................................................................Page 8
Defrosting.......................................................................................... Page 10
Setting up Continuous Drainage ............................................. Page 10
Cleaning, Maintenance and Storage ...................................... Page 11
Recycling and Disposal ............................................................... Page 13
EN
Thank you for choosing to purchase a product from Pro Breeze. Please read the entire manual
carefully prior to rst use and keep in a safe place for future reference.
SAFETY INSTRUCTIONS
--
PLEASE READ AND SAVE THESE IMPORTANT SAFETY
INSTRUCTIONS.
When using electrical appliances, basic safety precautions
should always be followed to reduce the risk of re, electric
shock, and injury to persons, including the following:
WARNING: TO AVOID THE RISK OF ELECTRICAL SHOCK,
FIRE OR INJURY TO PEOPLE, ALWAYS TURN THE APPLIANCE
OFF, UNPLUG THE POWER CORD FROM THE ELECTRICAL
OUTLET AND EMPTY THE WATER TANK BEFORE HANDLING,
CLEANING OR SERVICING THE APPLIANCE.
• Use this dehumidier only as described in this manual.
Any other use not recommended by the manufacturer
may cause re, electric shock, or injury to person.
• Always unplug the dehumidier when not in use.
• Keep the dehumidier out of reach of children and pets.
• Do not leave children alone or unattended in the area
where the dehumidier is in use.
• Children shall not play with the dehumidier.
• Cleaning and user maintenance shall not be made by
children without supervision.
• Dispose of water held by the dehumidier. This water is
not drinkable.
• This dehumidier can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way
and understand the hazards involved.
• Never leave the dehumidier unattended while in use.
6L COMPRESSOR DEHUMIDIFIER
MODEL PB-D-26
4 of 16 | English English | 5 of 16
Always turn the dehumidier off and disconnected from
the power supply when not in use.
• Never place anything on top of the dehumidier.
• Ensure that the mains supply (including voltage,
frequency and power) complies with the rating label of
the dehumidier.
• Do not operate the dehumidier with wet hands.
• Do not use this dehumidier near water or in the
immediate surroundings of a bath, shower or a
swimming pool. Never place the dehumidier where it
may fall into a bathtub or other water container.
• Do not allow water or other liquids to run into the interior
of the dehumidier, as this could create a re and/or
electrical hazard.
• This dehumidier is intended for indoor household use
and similar applications. Do not use outdoors.
• The mains cable should not hang down from the surface
on which the dehumidier is placed in order to prevent
the dehumidier from being pulled down.
• To avoid a circuit overload when using this dehumidier,
do not operate another high-wattage dehumidier on
the same electrical circuit.
• Always plug the dehumidier directly into a wall socket.
Avoid using extension leads where possible as they may
overheat and cause a risk of re.
• Do not use this dehumidier with an external
programmer, timer switch or any other device which
would switch the dehumidier on automatically unless
this has already been pre-built into the appliance by the
manufacturer.
• Do not pull on the power cord. Never move, carry, or hang
the dehumidier by the power cord.
• Do not kink or wrap the power cord and plug around the
dehumidier, as this may cause the insulation to weaken
or split, particularly where it enters the dehumidier.
• Do not operate the dehumidier with any safety guards
removed.
• Do not operate the dehumidier if there are any signs of
damage to the appliance or accessories supplied.
• Do not attempt to repair or adjust any electrical or
mechanical elements in the dehumidier. Doing so may
be unsafe and will void your warranty.
• The appliance shall be installed in accordance with
national wiring regulations.
• Do not cover the dehumidier whilst in use.
• When moving the dehumidier, ensure it is kept in an
upright position.
• The dehumidier must have a minimum 50cm clearance
around all sides.
• Avoid placing the power cord in areas where it can
become a tripping hazard. Do not place the power cord
under carpeting or cover it with rugs, runners or similar.
• Place the dehumidier on a at, stable and dry surface
and always keep the appliance in an upright position.
Operating the appliance in any other position could
cause a hazard.
• There may be trace of odour during the rst few minutes
of initial use. This is normal and will quickly disappear.
• Do not place the dehumidier against a wall or other
appliances.
• Do not cover, obstruct or push objects into the vents
and opening of the dehumidier as this may cause an
electric shock, re or damage the dehumidier.
• Do not operate the dehumidier without the lter.
• Do not use mechanical devices to accelerate the
appliances defrosting process.
• Do not place the continuous drainage hose outside when
the temperature falls below 1°C.
• Do not use the dehumidier near petrol, paints,
ammable gases, ovens, or other heating sources.
• Do not operate the dehumidier with the water tank
removed.
• Ensure the mains cable is fully extended before use and
arrange it so that it is not in contact with any part of the
dehumidier.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or a similarly qualied
person in order to avoid a hazard.
• Never insert ngers or metal objects into the vents and
4 of 16 | English English | 5 of 16
Always turn the dehumidier off and disconnected from
the power supply when not in use.
• Never place anything on top of the dehumidier.
• Ensure that the mains supply (including voltage,
frequency and power) complies with the rating label of
the dehumidier.
• Do not operate the dehumidier with wet hands.
• Do not use this dehumidier near water or in the
immediate surroundings of a bath, shower or a
swimming pool. Never place the dehumidier where it
may fall into a bathtub or other water container.
• Do not allow water or other liquids to run into the interior
of the dehumidier, as this could create a re and/or
electrical hazard.
• This dehumidier is intended for indoor household use
and similar applications. Do not use outdoors.
• The mains cable should not hang down from the surface
on which the dehumidier is placed in order to prevent
the dehumidier from being pulled down.
• To avoid a circuit overload when using this dehumidier,
do not operate another high-wattage dehumidier on
the same electrical circuit.
• Always plug the dehumidier directly into a wall socket.
Avoid using extension leads where possible as they may
overheat and cause a risk of re.
• Do not use this dehumidier with an external
programmer, timer switch or any other device which
would switch the dehumidier on automatically unless
this has already been pre-built into the appliance by the
manufacturer.
• Do not pull on the power cord. Never move, carry, or hang
the dehumidier by the power cord.
• Do not kink or wrap the power cord and plug around the
dehumidier, as this may cause the insulation to weaken
or split, particularly where it enters the dehumidier.
• Do not operate the dehumidier with any safety guards
removed.
• Do not operate the dehumidier if there are any signs of
damage to the appliance or accessories supplied.
• Do not attempt to repair or adjust any electrical or
mechanical elements in the dehumidier. Doing so may
be unsafe and will void your warranty.
• The appliance shall be installed in accordance with
national wiring regulations.
• Do not cover the dehumidier whilst in use.
• When moving the dehumidier, ensure it is kept in an
upright position.
• The dehumidier must have a minimum 50cm clearance
around all sides.
• Avoid placing the power cord in areas where it can
become a tripping hazard. Do not place the power cord
under carpeting or cover it with rugs, runners or similar.
• Place the dehumidier on a at, stable and dry surface
and always keep the appliance in an upright position.
Operating the appliance in any other position could
cause a hazard.
• There may be trace of odour during the rst few minutes
of initial use. This is normal and will quickly disappear.
• Do not place the dehumidier against a wall or other
appliances.
• Do not cover, obstruct or push objects into the vents
and opening of the dehumidier as this may cause an
electric shock, re or damage the dehumidier.
• Do not operate the dehumidier without the lter.
• Do not use mechanical devices to accelerate the
appliances defrosting process.
• Do not place the continuous drainage hose outside when
the temperature falls below 1°C.
• Do not use the dehumidier near petrol, paints,
ammable gases, ovens, or other heating sources.
• Do not operate the dehumidier with the water tank
removed.
• Ensure the mains cable is fully extended before use and
arrange it so that it is not in contact with any part of the
dehumidier.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or a similarly qualied
person in order to avoid a hazard.
• Never insert ngers or metal objects into the vents and
6 of 16 | English English | 7 of 16
SPECIFICATION
--
openings of the appliance.
• The unit’s circuit board(PCB) is designed with a fuse to
provide overcurrent protection. The specications of the
fuse are printed on the circuit board.
• Do not expose the appliance to direct sunlight, heat
sources or extreme cold.
• Do not cover the appliance or restrict the air ow of the
inlet or exhaust grills whilst in use.
SPECIFIC INFORMATION REGARDING R290 REFRIGERANT GAS
――
CAUTION
RISK OF FIRE
WARNING: THE DEHUMIDIFIER MUST BE INSTALLED,
OPERATED AND STORED IN A ROOM WITH A FLOOR AREA
LARGER THAN 4M
2
.
• This appliance contains 0.034kg (34g) of R290 refrigerant
gas.
• R290 is a refrigerant gas that complies with the European
directive on the environment.
• Do not puncture any part of the refrigerant circuit.
• Be aware that R290 refrigerant is odourless and does not
have the odour normally associated with natural gas and
propane tanks.
• Do not use means to accelerate the defrosting process
or to clean, other than those recommended by the
manufacturer.
• The dehumidier must be placed in an area without any
continuous sources of ignition such as open ames, gas,
or electrical appliances in operation.
• Do not puncture and do not burn the refrigerant circuit.
• If the appliance is installed, operated or stored in a
nonventilated area, the room must be designed to
prevent the accumulation of refrigerant leaks resulting in
a risk of re or explosion due to ignition of the refrigerant
caused by electric heaters, stoves, or other sources of
ignition.
• The appliance must be stored in such a way as to
prevent mechanical failure.
• Individuals who operate or work on the refrigerant circuit
must have the appropriate certication issued by an
accredited organisation that ensures competence in
handling refrigerants according to a specic evaluation
recognised by associations in the industry.
• Maintenance and repairs that require the assistance
of other qualied personnel must be performed under
the supervision of an individual specied in the use of
ammable refrigerants.
Model: PB-D-26-UK Voltage: 220-240V~
Frequency: 50Hz Power: 150W
Product Dimensions: 256 x 205 x 430mm Net Weight: 6.2kg
Fuse: 250V~, 3.15A Gross Weight: 6.8kg
SYMBOLS EXPLAINED
--
For indoor use only.
Please read instruction manual
and retain for future use.
Equipment complies with the
applicable UK safety requirements
and regulations.
Equipment complies with the
applicable EU safety requirements
and regulations.
6 of 16 | English English | 7 of 16
SPECIFICATION
--
openings of the appliance.
• The unit’s circuit board(PCB) is designed with a fuse to
provide overcurrent protection. The specications of the
fuse are printed on the circuit board.
• Do not expose the appliance to direct sunlight, heat
sources or extreme cold.
• Do not cover the appliance or restrict the air ow of the
inlet or exhaust grills whilst in use.
SPECIFIC INFORMATION REGARDING R290 REFRIGERANT GAS
――
CAUTION
RISK OF FIRE
WARNING: THE DEHUMIDIFIER MUST BE INSTALLED,
OPERATED AND STORED IN A ROOM WITH A FLOOR AREA
LARGER THAN 4M
2
.
• This appliance contains 0.034kg (34g) of R290 refrigerant
gas.
• R290 is a refrigerant gas that complies with the European
directive on the environment.
• Do not puncture any part of the refrigerant circuit.
• Be aware that R290 refrigerant is odourless and does not
have the odour normally associated with natural gas and
propane tanks.
• Do not use means to accelerate the defrosting process
or to clean, other than those recommended by the
manufacturer.
• The dehumidier must be placed in an area without any
continuous sources of ignition such as open ames, gas,
or electrical appliances in operation.
• Do not puncture and do not burn the refrigerant circuit.
• If the appliance is installed, operated or stored in a
nonventilated area, the room must be designed to
prevent the accumulation of refrigerant leaks resulting in
a risk of re or explosion due to ignition of the refrigerant
caused by electric heaters, stoves, or other sources of
ignition.
• The appliance must be stored in such a way as to
prevent mechanical failure.
• Individuals who operate or work on the refrigerant circuit
must have the appropriate certication issued by an
accredited organisation that ensures competence in
handling refrigerants according to a specic evaluation
recognised by associations in the industry.
• Maintenance and repairs that require the assistance
of other qualied personnel must be performed under
the supervision of an individual specied in the use of
ammable refrigerants.
Model: PB-D-26-UK Voltage: 220-240V~
Frequency: 50Hz Power: 150W
Product Dimensions: 256 x 205 x 430mm Net Weight: 6.2kg
Fuse: 250V~, 3.15A Gross Weight: 6.8kg
SYMBOLS EXPLAINED
--
For indoor use only.
Please read instruction manual
and retain for future use.
Equipment complies with the
applicable UK safety requirements
and regulations.
Equipment complies with the
applicable EU safety requirements
and regulations.
8 of 16 | English English | 9 of 16
ASSEMBLY
--
1. Remove all parts from the packaging and ensure you have all parts listed above.
2. Take the 4 x wheels and clip them into the four holes on the bottom of the unit.
3. Your dehumidier is now ready to use.
OPERATING INSTRUCTIONS
--
PARTS
--
1. Control Panel
2. Air Inlet
3. Continuous Drainage Hole
4. Water Tank
5. Handle
6. Back Housing
7. Wheels x 4
Turning On/Off
1. Plug in the dehumidier. It will beep once.
2. To turn on the dehumidier, press the power button. The dehumidier will beep once and
the power indicator light will turn on.
3. To turn off the dehumidier, press the power button again. The power indicator light will
turn off.
Note: When the indoor humidity reaches the target value set, the compressor will stop running
and the indicator light will ash.
Setting the Humidity
1. Plug in and turn on the dehumidier.
2. Repeatedly press the humidity setting button to cycle through the following modes:
• Continuous dehumidication
• Relative humidity from 30% to 90%, increasing 5% with every press.
• Automatic dehumidication
Continuous Dehumidication Mode
When the dehumidier is plugged in, continuous dehumidication mode will be the default.
Drying Laundry with Continuous Dehumidication Mode
To use this dehumidier to efciently and quickly dry laundry press the fan speed button to
turn the fan speed to high when the unit is in continuous dehumidication mode. Ensure the
dehumidier is placed near the drying laundry in a well-ventilated room.
Relative Humidity Mode
• The dehumidier will bring your environment’s ambient humidity to your target relative
humidity percentage, between 30% and 90%.
• When the ambient humidity is lower than your set target humidity by 3%, the compressor
will automatically turn off.
• The compressor will automatically turn back on when the ambient humidity is higher than
your set target humidity by 3%.
Automatic Dehumidication Mode
• When the ambient temperature is lower than 5°C, the compressor will automatically
turn off.
• At an ambient temperature between 5°C and 20°C, the target relative humidity will
automatically be set to 60%.
If you nd you’re missing any parts from your order, please contact our customer care team by
emailing [email protected] for fast and friendly help.
These images are for reference only, please refer to your product.
1. Defrost Indicator Light
2. Water Tank Full Indicator
Light
3. Timer Indicator Light
4. Low Fan Speed Indicator
Light
5. High Fan Speed Indicator
Light
6. Power Indicator Light
7. Humidity Setting Button
8. Timer Button
9. Fan Speed Button
10. Power Button
32
7 8
1 6
4 5
9 10
Drying Laundry? Scan this QR code for our comprehensive guide.
5
7
6
1
2
3
4
8 of 16 | English English | 9 of 16
ASSEMBLY
--
1. Remove all parts from the packaging and ensure you have all parts listed above.
2. Take the 4 x wheels and clip them into the four holes on the bottom of the unit.
3. Your dehumidier is now ready to use.
OPERATING INSTRUCTIONS
--
PARTS
--
1. Control Panel
2. Air Inlet
3. Continuous Drainage Hole
4. Water Tank
5. Handle
6. Back Housing
7. Wheels x 4
Turning On/Off
1. Plug in the dehumidier. It will beep once.
2. To turn on the dehumidier, press the power button. The dehumidier will beep once and
the power indicator light will turn on.
3. To turn off the dehumidier, press the power button again. The power indicator light will
turn off.
Note: When the indoor humidity reaches the target value set, the compressor will stop running
and the indicator light will ash.
Setting the Humidity
1. Plug in and turn on the dehumidier.
2. Repeatedly press the humidity setting button to cycle through the following modes:
• Continuous dehumidication
• Relative humidity from 30% to 90%, increasing 5% with every press.
• Automatic dehumidication
Continuous Dehumidication Mode
When the dehumidier is plugged in, continuous dehumidication mode will be the default.
Drying Laundry with Continuous Dehumidication Mode
To use this dehumidier to efciently and quickly dry laundry press the fan speed button to
turn the fan speed to high when the unit is in continuous dehumidication mode. Ensure the
dehumidier is placed near the drying laundry in a well-ventilated room.
Relative Humidity Mode
• The dehumidier will bring your environment’s ambient humidity to your target relative
humidity percentage, between 30% and 90%.
• When the ambient humidity is lower than your set target humidity by 3%, the compressor
will automatically turn off.
• The compressor will automatically turn back on when the ambient humidity is higher than
your set target humidity by 3%.
Automatic Dehumidication Mode
• When the ambient temperature is lower than 5°C, the compressor will automatically
turn off.
• At an ambient temperature between 5°C and 20°C, the target relative humidity will
automatically be set to 60%.
If you nd you’re missing any parts from your order, please contact our customer care team by
These images are for reference only, please refer to your product.
1. Defrost Indicator Light
2. Water Tank Full Indicator
Light
3. Timer Indicator Light
4. Low Fan Speed Indicator
Light
5. High Fan Speed Indicator
Light
6. Power Indicator Light
7. Humidity Setting Button
8. Timer Button
9. Fan Speed Button
10. Power Button
32
7 8
1 6
4 5
9 10
Drying Laundry? Scan this QR code for our comprehensive guide.
5
7
6
1
2
3
4
10 of 16 | English English | 11 of 16
• At an ambient temperature between 20°C and 27°C, the target relative humidity will
automatically be set to 55%.
• When the ambient temperature is higher than 27°C, the target relative humidity will
automatically be set to 50%.
Setting the Fan Speed
1. While the dehumidier is on, press the fan speed button repeatedly to cycle through the fan
speed options of low and high.
2. The corresponding indicator high or low fan speed indicator light will turn on.
Setting a Timer
Setting a turn-on timer:
1. Plug in the dehumidier.
2. Press the timer button repeatedly to cycle through the time options of 1 – 24 hours.
3. When you reach your desired amount of hours, do not press anything. When the display
stops ashing, the timer has been set.
4. The timer indicator light will be on while the timer is in use.
5. The dehumidier will turn on when the set time elapses.
6. To cancel the timer, press the power button at any point.
Setting a turn-off timer:
1. Plug in and turn on the dehumidier.
2. Press the timer button repeatedly to cycle through the time options of 1 – 24 hours.
3. When you reach your desired amount of hours, do not press anything. When the display
stops ashing, the timer has been set.
4. The timer indicator light will be on while the timer is in use.
5. The dehumidier will turn off when the set time elapses.
6. To cancel the timer, press the power button at any point.
DEFROSTING
― ―
The dehumidier will automatically defrost if the compressor becomes too cold. While defrosting,
the defrost indicator light will turn on, the compressor will turn off, and the motor will keep
working.
SETTING UP CONTINUOUS DRAINAGE
― ―
1. Remove the water tank.
2. Attach one end of the continuous drainage hose to the continuous drainage port and place
the other end where you would like the water to drain out into.
3. Replace the water tank.
Emptying the Water Tank:
When the water tank is full, the indicator light will turn on and the compressor will turn off.
1. Unplug the dehumidier and place it on a at, stable surface.
2. Firmly grip each side of the water tank and gently pull it out of the dehumidier. Do not pull
from the continuous drainage port hole.
3. Carefully empty the water tank and replace it by slotting it back in the appliance.
4. Press the power button to turn the appliance back on.
Note: The water tank indicator light will also turn on if the dehumidier is on, but the tank is
missing or placed in incorrectly.
CLEANING, MAINTENANCE AND STORAGE
――
WARNING: ALWAYS TURN THE APPLIANCE OFF AND UNPLUG
THE POWER CORD FROM THE ELECTRICAL OUTLET BEFORE
HANDLING OR CLEANING IT.
CAUTION: DO NOT ALLOW WATER OR OTHER LIQUIDS TO
RUN INTO THE INTERIOR OF THE APPLIANCE, AS THIS COULD
CREATE A FIRE AND/OR ELECTRICAL HAZARD.
CAUTION: DO NOT USE ANY ABRASIVE CLEANERS OR
SOLVENTS, AS THIS CAN DAMAGE THE APPLIANCE.
• Do not attempt to clean the appliance in any other way
than that detailed by the manufacturer.
• Empty and clean the appliance before storage. Clean the
appliance before next use.
• Clean the exterior surface of the appliance by wiping
it with a soft, damp cloth. Dry the appliance with a soft,
clean cloth.
• Always empty the water tank, clean and dry the
appliance when not in use to prevent mould.
• Store in a clean, dry place away from direct sunlight.
Place out of reach of children.
• To store your product, we recommend using the original
or a similar sized box.
• The lter should be cleaned every two weeks using a
damp cloth.
10 of 16 | English English | 11 of 16
• At an ambient temperature between 20°C and 27°C, the target relative humidity will
automatically be set to 55%.
• When the ambient temperature is higher than 27°C, the target relative humidity will
automatically be set to 50%.
Setting the Fan Speed
1. While the dehumidier is on, press the fan speed button repeatedly to cycle through the fan
speed options of low and high.
2. The corresponding indicator high or low fan speed indicator light will turn on.
Setting a Timer
Setting a turn-on timer:
1. Plug in the dehumidier.
2. Press the timer button repeatedly to cycle through the time options of 1 – 24 hours.
3. When you reach your desired amount of hours, do not press anything. When the display
stops ashing, the timer has been set.
4. The timer indicator light will be on while the timer is in use.
5. The dehumidier will turn on when the set time elapses.
6. To cancel the timer, press the power button at any point.
Setting a turn-off timer:
1. Plug in and turn on the dehumidier.
2. Press the timer button repeatedly to cycle through the time options of 1 – 24 hours.
3. When you reach your desired amount of hours, do not press anything. When the display
stops ashing, the timer has been set.
4. The timer indicator light will be on while the timer is in use.
5. The dehumidier will turn off when the set time elapses.
6. To cancel the timer, press the power button at any point.
DEFROSTING
― ―
The dehumidier will automatically defrost if the compressor becomes too cold. While defrosting,
the defrost indicator light will turn on, the compressor will turn off, and the motor will keep
working.
SETTING UP CONTINUOUS DRAINAGE
― ―
1. Remove the water tank.
2. Attach one end of the continuous drainage hose to the continuous drainage port and place
the other end where you would like the water to drain out into.
3. Replace the water tank.
Emptying the Water Tank:
When the water tank is full, the indicator light will turn on and the compressor will turn off.
1. Unplug the dehumidier and place it on a at, stable surface.
2. Firmly grip each side of the water tank and gently pull it out of the dehumidier. Do not pull
from the continuous drainage port hole.
3. Carefully empty the water tank and replace it by slotting it back in the appliance.
4. Press the power button to turn the appliance back on.
Note: The water tank indicator light will also turn on if the dehumidier is on, but the tank is
missing or placed in incorrectly.
CLEANING, MAINTENANCE AND STORAGE
――
WARNING: ALWAYS TURN THE APPLIANCE OFF AND UNPLUG
THE POWER CORD FROM THE ELECTRICAL OUTLET BEFORE
HANDLING OR CLEANING IT.
CAUTION: DO NOT ALLOW WATER OR OTHER LIQUIDS TO
RUN INTO THE INTERIOR OF THE APPLIANCE, AS THIS COULD
CREATE A FIRE AND/OR ELECTRICAL HAZARD.
CAUTION: DO NOT USE ANY ABRASIVE CLEANERS OR
SOLVENTS, AS THIS CAN DAMAGE THE APPLIANCE.
• Do not attempt to clean the appliance in any other way
than that detailed by the manufacturer.
• Empty and clean the appliance before storage. Clean the
appliance before next use.
• Clean the exterior surface of the appliance by wiping
it with a soft, damp cloth. Dry the appliance with a soft,
clean cloth.
• Always empty the water tank, clean and dry the
appliance when not in use to prevent mould.
• Store in a clean, dry place away from direct sunlight.
Place out of reach of children.
• To store your product, we recommend using the original
or a similar sized box.
• The lter should be cleaned every two weeks using a
damp cloth.
12 of 16 | English English | 13 of 16
• Unplug the appliance during lling and cleaning.
• Never leave water in the water tank when the appliance
is not in use.
Cleaning the water tank:
1. Remove and empty the water tank as per the instructions
above.
2. Clean the water tank with warm tap water and mild
detergent (e.g. washing up liquid). Note: Do not use
boiling water to clean the water tank.
3. Remove any scale or deposits that have formed inside
the water tank.
4. Wipe all surfaces dry before placing the water tank back
into the appliance.
5. Ensure the appliance and water tank are clean and dry
before storage.
Cleaning the lter:
We recommend you clean the lter of this unit every 2
weeks.
1. Remove and empty the
water tank as per the
instructions above.
2. Remove the lter by
pulling down on the
handle.
3. Wash the lter with cool
water.
4. Let the lter air-dry.
5. Replace the lter and
water tank.
Maintenance:
The unit may need defrosting in temperatures less than
23°C - This will happen automatically and last up to 5
minutes. During this time, the dehumidifying function will
stop and the defrost indicator will light up. Do not switch off
while the unit is defrosting.
RECYCLING AND DISPOSAL
--
Waste electrical and electronic products (WEEE), batteries, accumulators and packaging
should not be disposed of with general household waste. This is to prevent possible harm to the
environment and human well-being, and to help conserve our natural resources. Most electrical
products with a plug, battery, or cable can be recycled. Contact your local council, household
waste disposal service, or the store where you purchased the product for information regarding
the collection schemes in your area.
Take-Back Scheme
Waste electrical products (WEEE) can be sent to One Retail Group for recycling and disposal
when you purchase a new product from One Retail Group, on a like-for-like basis. For more
information on how to recycle this product please visit www.probreeze.com
The end-user of electrical and electronic products (WEEE) is responsible for separating old
batteries and lamp bulbs before they are handed over to a designated disposal and recycling
service. Waste batteries can also be disposed of in collection bins, which can be found in most
local supermarkets and household waste recycling centres.
Waste Electrical and
Electronic Equipment
(WEEE)
This symbol on the product and/or packaging indicates that
Waste Electrical products (WEEE) under Directive 2012/19/
EU which governs used electrical and electronic appliances,
should not be disposed of with general household waste.
The Mobius Loop
This symbol indicates that the product or packaging is
capable of being recycled.
Filter
Filter Handle
12 of 16 | English English | 13 of 16
• Unplug the appliance during lling and cleaning.
• Never leave water in the water tank when the appliance
is not in use.
Cleaning the water tank:
1. Remove and empty the water tank as per the instructions
above.
2. Clean the water tank with warm tap water and mild
detergent (e.g. washing up liquid). Note: Do not use
boiling water to clean the water tank.
3. Remove any scale or deposits that have formed inside
the water tank.
4. Wipe all surfaces dry before placing the water tank back
into the appliance.
5. Ensure the appliance and water tank are clean and dry
before storage.
Cleaning the lter:
We recommend you clean the lter of this unit every 2
weeks.
1. Remove and empty the
water tank as per the
instructions above.
2. Remove the lter by
pulling down on the
handle.
3. Wash the lter with cool
water.
4. Let the lter air-dry.
5. Replace the lter and
water tank.
Maintenance:
The unit may need defrosting in temperatures less than
23°C - This will happen automatically and last up to 5
minutes. During this time, the dehumidifying function will
stop and the defrost indicator will light up. Do not switch off
while the unit is defrosting.
RECYCLING AND DISPOSAL
--
Waste electrical and electronic products (WEEE), batteries, accumulators and packaging
should not be disposed of with general household waste. This is to prevent possible harm to the
environment and human well-being, and to help conserve our natural resources. Most electrical
products with a plug, battery, or cable can be recycled. Contact your local council, household
waste disposal service, or the store where you purchased the product for information regarding
the collection schemes in your area.
Take-Back Scheme
Waste electrical products (WEEE) can be sent to One Retail Group for recycling and disposal
when you purchase a new product from One Retail Group, on a like-for-like basis. For more
information on how to recycle this product please visit www.probreeze.com
The end-user of electrical and electronic products (WEEE) is responsible for separating old
batteries and lamp bulbs before they are handed over to a designated disposal and recycling
service. Waste batteries can also be disposed of in collection bins, which can be found in most
local supermarkets and household waste recycling centres.
Waste Electrical and
Electronic Equipment
(WEEE)
This symbol on the product and/or packaging indicates that
Waste Electrical products (WEEE) under Directive 2012/19/
EU which governs used electrical and electronic appliances,
should not be disposed of with general household waste.
The Mobius Loop
This symbol indicates that the product or packaging is
capable of being recycled.
Filter
Filter Handle
14 of 16 | English English | 15 of 16
14 of 16 | English English | 15 of 16
One Retail Group, Ryland House,
24A Ryland Road, Kentish Town, London, NW5 3EH, United Kingdom
EU Authorised Representative: Brandrep Limited, The Black Church,
St Mary's Pl N, Dublin, D07 P4AX, Ireland
© Copyright 2024
www.probreeze.com
