User Manual
• Please read this manual before operating this
scanner.
• After you finish reading this manual, store it in a safe
place for future reference.
2
FCC REGULATIONS (For 120V model)
Photo Scanner, Model 6130230
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the
equipment OFF and ON, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with Class B limits in
Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless
otherwise specified in the manual. If such changes or modifications
should be made, you could be required to stop operation of the
equipment.
Canon U.S.A. Inc.
ONE CANON PARK, MELVILLE, NY 11747, U.S.A.
Tel. No. 1-800-652-2666
ENERGY STAR
®
Office Equipment Program
This program is for U.S.A and Canada.
As an ENERGY STAR
®
Partner, CANON
ELECTRONICS INC. has determined that this
machine meets the ENERGY STAR
®
Program
guidelines for energy efficiency.
The ENERGY STAR
®
Office Equipment Program is
an international program that promotes energy saving through the use
of computers and other office equipment. The program backs the
development and dissemination of products with functions that
effectively reduce energy consumption. It is an open system in which
business proprietors can participate voluntarily. The targeted products
are office equipment, such as computers, monitors, printers, fax,
machine, copiers, and scanners. The standards and logos are uniform
among participating nations.
This model doesn’t provide setting options for power management.
Only for European Union and EEA (Norway, Iceland and
Liechtenstein)
This symbol indicates that this product is not to be disposed
of with your household waste, according to the WEEE
Directive (2012/19/EU) and national legislation. This
product should be handed over to a designated collection
point, e.g., on an authorized one-for-one basis when you
buy a new similar product or to an authorized collection site for
recycling waste electrical and electronic equipment (EEE). Improper
handling of this type of waste could have a possible negative impact
on the environment and human health due to potentially hazardous
substances that are generally associated with EEE. At the same time,
your cooperation in the correct disposal of this product will contribute
to the effective usage of natural resources. For more information
about where you can drop off your waste equipment for recycling,
please contact your local city office, waste authority, approved WEEE
scheme or your household waste disposal service. For more
information regarding return and recycling of WEEE products, please
visit www.canon-europe.com/weee
.
3
Model Names
The following name may be provided for the safety regulations in each
sales region of the Photo Scanner.
RS40: Model 6130230
Reproduction Warning
This device is designed to be used in a legal manner, in accordance
with all applicable laws, including, but not limited to, counterfeit and
copyright laws, as well as laws pertaining to national security.
Any person(s) found to have reproduced any of the following materials
(regardless of whether such reproduction was intentional or not) for
the purpose of misrepresenting such material as the original may be
prosecuted in accordance with the applicable laws and regulations.
• Paper money or bank notes (domestic and foreign)
• Postage stamps, revenue stamps, or other similar stamps
• Stock certificates, bond certificates, promissory notes, cheques, or
other valuable certificates
• Passports, licenses, or other certificates or documents issued by
government officials or agencies
This is not an exhaustive list.
Canon is not responsible for how this scanner is used by an individual.
Please note that certain intellectual property is protected by copyright
law, and copyrighted items may not be reproduced without the
express permission of the copyright holder except for personal or
household use under limited circumstances.
Trademarks
• Canon and the Canon logo are registered trademarks, of Canon Inc.
in the United States and may also be trademarks or registered
trademarks in other countries.
• imageFORMULA is a trademark of CANON ELECTRONICS INC.
• Microsoft, Windows, PowerPoint, and SharePoint are registered
trademarks or trademarks of Microsoft Corporation in the United
States and other countries.
• Microsoft product screen shot(s) reprinted with permission from
Microsoft Corporation.
• macOS is the trademark of Apple Inc., registered in the U.S. and
other countries.
• ENERGY STAR
®
is a registered trademark of the United States
Environmental Protection Agency.
• Other product and company names herein may be the trademarks
of their respective owners. However, the
TM
and
®
symbols are not
used in this document.
Copyright
Copyright 2020 by CANON ELECTRONICS INC. All rights reserved.
No part of this publication may be reproduced or transmitted in any
form or by any means, electronic or mechanical, including
photocopying and recording, or by any information storage or retrieval
system without the prior written permission of CANON
ELECTRONICS INC.
4
Disclaimers
The information in this document is subject to change without notice.
CANON ELECTRONICS INC. MAKES NO WARRANTY OF ANY
KIND WITH REGARD TO THIS MATERIAL, EITHER EXPRESS OR
IMPLIED, EXPECT AS PROVIDED HEREIN, INCLUDING WITHOUT
LIMITATION, THEREOF, WARRANTIES AS TO MARKETABILITY,
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
OF USE OR NON-INFRINGEMENT. CANON ELECTRONICS INC.
SHALL NOT BE LIABLE FOR ANY DIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR
EXPENSES RESULTING FROM THE USE OF THIS MATERIAL.
CANON ELECTRONICS INC. IS NOT LIABLE FOR THE STORAGE
AND HANDLING OF DOCUMENTS SCANNED WITH THIS
PRODUCT, OR THE STORAGE AND HANDLING OF RESULTING
SCANNED IMAGE DATA.
IF YOU INTEND TO DISCARD THE ORIGINALS OF SCANNED
DOCUMENTS, YOU THE CUSTOMER ARE RESPONSIBLE FOR
INSPECTING THE SCANNED IMAGES AND VERIFYING THAT
DATA IS INTACT.
THE MAXIMUM LIABILITY OF CANON ELECTRONICS INC.
UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE
OF THE PRODUCT COVERED BY THE WARRANTY.
5
Introduction
Thank you for purchasing the Canon imageFORMULA Photo
Scanner.
Please read the following manuals carefully and familiarize yourself
with the functions of the scanner before use to ensure you sufficiently
understand the functions and make the most of the scanner’s
capabilities. After reading the manuals, store them in a safe place for
future reference.
Manuals for the Scanner
Documentation for this scanner consists of the following manuals.
● Product Safety Guide
Before using the scanner, be sure to read and follow these
instructions.
● Setup Guide
This describes setup procedures for the scanner. Read this manual
when you first use the scanner.
● User Manual (this manual)
This manual contains the operating procedures of the scanner.
(PDF electronic manual only)
• If you are using Windows, the User Manual (electronic manual) will
be registered to the following location when the software is installed.
6
Hint
In Windows 8.1, it is registered at the following location.
• If you are using macOS, the User Manual (electronic manual) will be
registered to the following location.
Symbols Used in This Manual
The following symbols are used in this manual to explain procedures,
restrictions, handling precautions, and instructions that should be
observed for safety.
WARNING
Indicates a warning concerning operations that may lead to death
or injury to persons if not performed correctly. To use the scanner
safely, always pay attention to these warnings.
CAUTION
Indicates a caution concerning operations that may lead to injury to
persons, or damage to property if not performed correctly. To use
the scanner safely, always pay attention to these cautions.
IMPORTANT
Indicates operational requirements and restrictions. Be sure to
read these items carefully to operate the scanner correctly, and
avoid damaging the scanner.
Hint
Indicates a clarification of an operation, or contains additional
explanations for a procedure. Reading these notes is highly
recommended.
7
Table of Contents
Introduction ......................................................................... 5
Symbols Used in This Manual...................................................... 6
Before Using the Scanner............................ 8
System Requirements of Software............................... 8
Turning the Power ON................................................... 9
Turning Off the Power ............................................................. 9
Important Safety Instructions..................................... 10
Installation Location .............................................................. 10
AC Adapter............................................................................ 10
Moving the Scanner .............................................................. 11
Handling................................................................................ 11
Disposal ................................................................................ 12
When sending the scanner for repairs .................................. 12
Features of the Scanner.............................................. 13
Names and Functions of Parts ................................... 15
Scanning Photos ........................................ 18
Conditions .................................................................... 18
Photos that need special care............................................... 18
Photos that cannot be scanned............................................. 18
Basic Photo Scanning................................................. 19
Step 1: Prepare Photos to be Scanned................................. 19
Step 2: Place Photos............................................................. 19
Step 3: Scan Photos and Save ............................................. 21
Advanced Photo Scanning ......................................... 24
Scanning Notes on the Backs of Photos / Scanning with
Carrier Sheet......................................................................... 24
Scanning Documents ................................. 29
How to Place Documents............................................ 29
Scanning multiple documents ............................................... 29
Placing Cards........................................................................ 30
Setting the Long Document Mode......................................... 31
Detecting a document double feed ....................................... 33
How to Scan Documents............................................. 37
One Touch Scan ................................................................... 37
Maintenance............................................... 38
Daily Maintenance........................................................ 38
Cleaning the Scanner............................................................ 38
Cleaning the Inside of the Scanner ....................................... 38
Cleaning the Sensor Glass and the Rollers .......................... 38
Adjusting the Reduction Ratio............................................... 40
Replacing Consumable Parts................................................ 42
Auto Power Off Setting.......................................................... 47
Removing the Document Feed Tray ..................................... 48
About the Canon imageFORMULA Driver Setting Tool ........ 48
Troubleshooting ........................................ 50
Common Problems and Solutions.............................. 50
Software Troubleshooting........................................... 53
Useful tips..................................................................... 54
Clearing a Paper Jam................................................... 56
Uninstalling the Software ............................................ 58
Appendix .................................................... 59
Specifications............................................................... 59
Replacement parts ................................................................ 60
Consumables ........................................................................ 60
Dimensions............................................................................ 60
Index...............................................................................61
8
Before Using the Scanner
System Requirements of Software
To use the scanner, your computer must satisfy the following system
requirements.
Computer
CPU: Intel Core i3 2.13GHz or faster
Intel Core i7 2.3GHz or faster
Memory: 4 GB or more
8 GB or more
Hard disk: 3 GB or more available space required for
installation of all software
USB interface: Hi-Speed USB2.0
Monitor: 1024 × 768 (XGA) or better
1440 × 900 WXGA+ (Wide XGA+) or better
Operating system
• Microsoft Windows 8.1 (32-bit and 64-bit editions)
• Microsoft Windows 10 (32-bit and 64-bit editions)
• Microsoft Windows 11
• macOS 10.15
• macOS 11
• macOS 12
This is the environment as of April 2022.
For the latest software support information, go to the Products page
on the Canon website.
Other requirements
• A TWAIN-compatible application that is compatible with the above
operating systems.
• .NET Framework 4.5 or later (Windows only)
IMPORTANT
• Use the USB interface provided as standard with your computer.
However, normal operation is not guaranteed with all USB
interfaces, even if present as standard equipment on the computer.
For details, consult your local authorized Canon dealer.
• Scanning speeds are lower if your computer’s standard USB
interface is USB Full-Speed (equal to USB 1.1.)
• The USB cable you are using should be the one originally included
with the scanner.
• If the CPU, memory, interface card, and other specifications do not
satisfy the installation requirements, the scanning speed may be
greatly reduced and transmission may take a long time.
• Even if the computer satisfies the system requirements, the
scanning speed may vary, depending on the specification of the
computer and the environment.
• The scanner drivers provided with the scanner do not necessarily
operate on all TWAIN-compatible applications. For details, contact
your application software retailer.
• In Windows 10 tablet mode, the software may disrupt the display.
Precautions for Use in 64-bit Operating Systems
(Windows only)
Scanning speed may vary depending on the specifications of your
computer.
9
Turning the Power ON
The power of the scanner can be turned ON and OFF with the power
button on the front of the scanner.
1
Make sure that the scanner and computer are connected
properly.
2
Press the power button.
The power button lights blue when the power turns ON.
Hint
A balloon message such as shown below appears on the task bar. If
you wait a while, automatic scanner recognition will end and the
scanner will become ready to use.
When the scanner is properly connected to the computer, the
(CaptureOnTouch) icon appears on the taskbar as follows.
If the taskbar icon appears as , the scanner is not properly
connected to the computer. Check the status of the power switch and
USB cable.
When the scanner is properly connected to the computer, the
(CaptureOnTouch) icon appears on the taskbar as follows.
If the taskbar icon appears as , the scanner is not properly
connected to the computer. Check the status of the power switch and
USB cable.
Turning Off the Power
Press and hold the power button until the indicator goes out.
IMPORTANT
• After turning the scanner off, wait at least 10 seconds before turning
it back on.
• If you will not be using the scanner for an extended period, you
should disconnect the power cord from the AC outlet for safety.
Hint
The scanner’s auto power off setting is enabled by default, and the
scanner will turn off automatically if it is not operated for 4 hours.
For details on how to disable this setting, see "Auto Power Off Setting"
on p. 47.
Power button
10
Important Safety Instructions
To ensure the safe operation of this scanner, be sure to read the
safety warnings and precautions described below.
Installation Location
The performance of this scanner is affected by the environment in
which it is installed. Make sure that the location where the scanner is
installed meets the following environmental requirements.
● Provide adequate space around the scanner for operation,
maintenance, and ventilation.
● Provide adequate space in front of the scanner for documents
output after being scanned.
● Avoid installing the machine in direct sunlight. If this is unavoidable,
use curtains to shade the scanner.
● Avoid locations where a considerable amount of dust accumulates
as dust may adversely affect the inside of the scanner.
● Avoid warm or humid locations, such as in the vicinity of a water
faucet, water heater, or humidifier. Avoid locations where ammonia
gas is emitted. Avoid locations near volatile or flammable materials,
such as alcohol or paint thinner.
● Avoid locations that are subject to vibration.
● Avoid exposing the scanner to rapid changes in temperature. If the
room in which the scanner is installed is cold but rapidly heated,
water droplets (condensation) may form inside the scanner. This
may result in a noticeable degradation in scanning quality. The
following conditions are recommended for optimal scanning quality:
Room temperature: 10 °C to 32.5 °C (50 °F to 90.5 °F)
Humidity: 20% to 80% RH
● Avoid installing the scanner near equipment that generates a
magnetic field (e.g. speakers, televisions, or radios.)
AC Adapter
● Connect only to a power outlet of the rated voltage and power
supply frequency (120 V, 60 Hz or 220-240 V, 50/60 Hz depending
on your region).
● Do not connect other electrical equipment to the same power outlet
to which the scanner is connected. Also, when using an extension
cord, make sure that the extension cord is rated for the current
requirements of the scanner.
● Never try to take the AC adapter apart or modify it in any way, as
this is dangerous.
● The power cord may become damaged if it is often stepped on or if
heavy objects are placed on it.
● Do not use the power cord while it is coiled.
● Do not pull directly on the power cord. When disconnecting the
power cord, grasp the plug and remove it from the outlet.
● Keep the area around the power cord clear of objects so that the
power cord can be disconnected easily in an emergency.
● Do not use an AC adapter other than the one provided with the
scanner. Do not use the AC adapter provided with the scanner with
other products.
● If you have any questions regarding the power supply, contact your
local authorized Canon dealer or service representative for further
information.
100mm
(3.94")
100mm (3.94")
100mm (3.94")
11
Moving the Scanner
● When moving the scanner, always hold it with both hands to avoid
dropping it.
● Make sure to disconnect the interface cable and AC adapter before
moving the scanner. If the scanner is transported with these items
connected, the plugs and connectors may be damaged.
Handling
WARNING
Note the following precautions whenever using the scanner. Failure to
do so may result in a fire or electric shock.
● Never use alcohol, benzene, paint thinner, aerosol sprays, or any
other highly flammable substance near the scanner.
● Do not cut, damage, or modify the power cord. Do not place heavy
objects on the power cord, and do not pull or excessively bend the
power cord.
● Never connect the power cord when your hands are wet.
● Do not connect the scanner to a multi plug power strip.
● Do not knot or coil the power cord as this may result in a fire or
electric shock. When connecting the power cord, make sure that the
power plug is securely and completely inserted into the power
outlet.
● The supplied power cord set is intended for use with this scanner
only. Do not use it with other electronic equipment. In addition, do
not use power cord sets other than the one supplied with the
scanner. Doing so may result in fire or electric shock.
● Do not take the scanner apart or modify it.
● Never try to take the AC adapter apart or modify it in any way, as
this is dangerous.
● Do not use flammable spray near the scanner.
● When cleaning the scanner, push the power button to turn it OFF
and disconnect the power cord from the power supply.
● Clean the scanner using a slightly dampened cloth which has been
well wrung out. Never use alcohol, benzene, paint thinner, or any
other flammable substances.
● If the scanner makes strange noises, or gives off smoke, heat, or
strange odors, or the scanner does not function or other
abnormalities occur when you use the machine, immediately push
the power button to turn it off, and disconnect the power plug from
the power outlet. Then, contact your local authorized Canon dealer
or service representative to have the unit serviced.
● Do not drop the scanner, or subject it to impact or strong shock.
Should the scanner ever become damaged, immediately push the
power button to turn it OFF, and disconnect the power plug from the
power outlet. Then, contact your local authorized Canon dealer or
service representative to have the unit serviced.
● Before moving the scanner, be sure to push the power button to turn
it OFF, and disconnect the power plug from the power outlet
CAUTION
● Do not install the scanner on a surface that is unstable or tilted, or
in an area subject to excessive vibrations, as this may cause the
scanner to fall, resulting in personal injury or damage to the
scanner.
● Never place small metal objects such as staples, paper clips, or
jewelry on the scanner. These items may fall into the scanner, and
cause a fire or electric shock. Should such objects ever fall inside
the scanner, immediately push the power button to turn it OFF, and
disconnect the power plug from the power outlet. Then, contact
your local authorized Canon dealer or service representative to
have the unit serviced.
● Do not install the scanner in a humid or dusty location. Doing so
might cause a fire or electric shock.
12
● Do not place objects on top of the scanner. Such objects may tip or
fall over, resulting in personal injury.
● Connect only to a power outlet of the rated voltage and power
supply frequency (120 V, 60 Hz or 220-240 V, 50/60 Hz depending
on your region). Doing so might cause a fire or electric shock.
● When unplugging the power cord, grasp it firmly by its plug. Do not
pull directly on the power cord, as this may damage or expose the
cord’s internal wiring, resulting in a fire or electric shock.
● Leave sufficient space around the power plug so that it can be
unplugged easily. If objects are placed around the power plug, you
will be unable to unplug it in an emergency.
● Do not allow water or flammable substances (alcohol, paint thinner,
benzene, etc.) to spill into the scanner, as this may result in a fire or
electric shock. Doing so might cause a fire or electric shock.
● Push the power button to turn the scanner OFF for safety when not
using the scanner for a long period of time, such as overnight. Also,
push the power switch to turn it OFF, and disconnect the power cord
from the power outlet for safety when the machine will not be used
for an extended period of time, such as during consecutive
holidays.
● Do not wear loose clothing or jewelry that may get caught in the
scanner while you are using it, as this may result in personal injury.
Be extra careful of neckties and long hair. If anything becomes
caught in the scanner, immediately disconnect the power cord to
stop the scanner.
● Be careful when loading paper into the scanner and when removing
jammed paper, as it is possible to cut your hand on the edge of a
sheet of paper.
Disposal
When disposing of this scanner, be sure to follow all local ordinances
and laws or consult with the retailer who sold you the scanner.
When sending the scanner for repairs
When a request is made for repairs, the scanner needs to be sent to
the specified address. When sending the scanner, use the packing
box in which it came. Firmly secure the scanner with packaging
material when you place it in the packing box.
13
Features of the Scanner
The main features of the scanner are described below.
● Compact Design
The scanner has a compact size of 291 mm (11.46") (W) × 250 mm
(9.84") (D) × 245 mm (9.65") (H).
● Fast Document Feeding
Photos and documents can be scanned at a speed of up to
40 pages per minute.
● High Image Quality
The 600 dpi optical resolution sensor incorporated in the scanner
enables documents to be scanned with high image quality.
● USB 2.0 Interface
The scanner supports Hi-Speed USB 2.0.
● Color/Grayscale Support
Documents can be scanned in 24-bit color or 256-level grayscale.
● Auto Photo Fix
The scanner can analyze the scene in a photo and then
automatically optimize corrections for that photo.
● Red-Eye Correction
The scanner can reduce the red in eyes that is caused by the flash.
● Face Sharpener
The scanner can do corrections to sharpen up out-of-focus faces of
people.
● Digital Face Smoothing
The scanner can reduce wrinkles and blemishes to make skin more
beautiful.
● Paper Texture Correction
The scanner can reduce matte patterns.
● Fading Correction
The scanner can correct the color of faded photos.
● Supports a Variety of Scanning Modes
The scanner supports the following scanning modes, depending on
the document type:
• Single-sided or double-sided scanning (with Skip Blank Page
function)
• Continuous or single sheet feed
● Card Scan
You can scan business or ID cards.
● Paper Size Detection
The scanner automatically detects the size of a scanned document
and eliminates any unnecessary space around the edges of the
image when storing the image, even when storing a document of
irregular size.
● Auto Color Detection
The scanner detects whether the scanned document is in color,
grayscale, or black and white, and saves the image accordingly.
● Full Auto Mode
A Full Auto Mode is provided in CaptureOnTouch and the scanner
driver to allow scanning under automatically determined conditions.
Scanning conditions such as the color mode and page size are set
automatically based on the document being scanned.
● Auto Resolution Detection
When enabled in the CaptureOnTouch or scanner driver settings,
this function detects the content of documents and determines the
scanning resolution automatically.
● Deskew
The scanner is equipped with a deskew function that straightens
images before saving them when documents are scanned askew.
The scanned images are straightened, as opposed to the actual
document sheets.
● Ultrasonic Double Feed Detection
Ultrasonic waves are used to detect pages that are fed at the same
time as well as the space between pages. Scanning stops if a
double feed is detected.
● Double Feed Detection Ignore
When a double feed is detected, the DFR button on the operation
panel is lit. You can continue scanning by pressing the DFR button.
● Text Enhancement Modes
The scanner is equipped with an Advanced Text Enhancement
Mode to enhance the text of documents with dark or uneven
backgrounds, and an Advanced Text Enhancement II mode to
enhance the text when both the text and background are light.
These modes may not work, depending on the type of document.
14
● Color Drop-out
The scanner is equipped with a Color Drop-out function that
enables you to specify a color for the scanner to omit from the
scanned image during black and white or grayscale scanning.
● Skip Blank Page Function
The scanner is equipped with a Skip Blank Page function that
enables you to scan a document without storing images of blank
pages, regardless of whether each page of the document is two-
sided or one-sided. Both sides are scanned, but saving the image
is skipped for scan images judged to be from a blank page.
● Prescan Function
The scanner is equipped with a Prescan function that allows you to
adjust the contrast and brightness of a prescanned image and then
send the adjusted image to the application software, without
needing to scan the document again.
● Character/Line Emphasis Function
If characters and lines in scanned images are not clearly visible, you
can use this function to adjust their thickness during scanning.
● Start Scanning from the Operating Panel
You can start scanning by launching CaptureOnTouch with the
operating panel buttons. By default, two One Touch buttons are
assigned to Job Nos. 1 and 2, which allows you to easily scan a
document by just following the instructions on the screen.
● Software Updates
The latest software information is periodically acquired from the
Internet, and the software is automatically updated. For details, see
the help of CaptureOnTouch.
● Auto Start
The scanner is equipped with an auto start function, which enables
scanning to be automatically started when a document placed in the
feeder is detected.
● Sleep Mode
The scanner is designed to save energy by automatically entering
the sleep mode if 10 minutes elapse without scanning or another
operation being performed.
Hint
Some functions may not be available depending on the software you
are using.
15
Names and Functions of Parts
Front View (With the Eject Tray Pushed In)
A OPEN Lever
Pull this toward you to open the front unit.
B Power button
Press this to turn on the scanner. When pressed, the power
indicator is lit.
Press this button again to turn off the power.
The power button lights or flashes as follows depending on the
scanner status.
C Document Feed Tray
Place the document.
D Document Guides
Align the document guides with both edges of the document to
ensure that the document feeds straightly.
Power Button Indication Description
Lit Power is on
Flashing (slowly) Sleep mode
Flashing (quickly)
An error (paper jam, front unit is
open, double feed, etc.) has
occurred
16
Front View (With the Eject Tray Pulled Out)
A Feed Extension Support
Open this when placing long paper in the scanner.
B Feed Support
Pull this out to support loaded documents.
C Operating Panel
A range of scanning operations can be performed with this, such
as starting and stopping scans, executing registered jobs, and
cancelling double feed detection. (See p. 17)
D Front Unit
Open this when cleaning the inside of the scanner or replacing
rollers.
E Document Eject Tray
Pull this out to scan documents. Scanned documents are output
here.
When scanning multiple documents of varying sizes at one time,
pulling out and lifting up this tray locks the angle of the tray, so the
documents ejected onto the tray are aligned.
F Document Eject Stopper
This prevents the document coming out of the document eject tray
and aligns the leading edges of the ejected document. It can be
moved to any position on the document eject tray to match the
length of the document.
17
Back View
A USB Connector
Connect the supplied USB cable to this connector.
B Power Connector
Connect the supplied AC adapter to this connector.
C Theft Prevention Hole (Security Slot)
Connect an anti-theft key chain or the like.
Operating Panel
A Job No. Indicator
Displays the number of the job selected with the operating panel.
B Job Select Button
This selects registered jobs. Every time the button is pressed, the
Job No. displayed in the Job No. Indicator changes.
C Start Button
This executes the job displayed in the Job No. Indicator.
D Stop Button
This stops active jobs.
E DFR (Double Feed Release) Button
This is lit when a document double feed is detected. Pressing this
button cancels the double feed detection function, allowing you to
continue scanning.
Displayed Error Codes
When a scanning error occurs, the following error codes are displayed
in the Job No. Indicator.
: displayed when the front unit is open.
: displayed when a paper jam is detected.
: displayed when a double feed is detected while scanning.
: displayed for other errors.
18
Scanning Photos
Conditions
The photo sizes that this scanner can scan are shown below.
IMPORTANT
• If the photos are curled, flatten them until they are curled 0.07"
(2mm) or less, or reduce the number of sheets of paper that are
loaded.
• Photos are more likely to curl in low temperatures. Photos are less
likely to curl if you scan them in an environment whose room
temperature is from 15 to 25 °C with humidity of 40 to 60%.
• Photos may stick together, depending on the thickness and type of
paper used for the photo.
Photos that need special care
The following photos may not scan well or may be damaged when
scanned.
• Photos that are not square/rectangular
• Photos that are not flat
• Photos that are curled more than 0.07" (2 mm)
• Photos that are wrinkled or creased
• Photos that have edges that are peeling apart
• Photos that have interiors that are peeling apart
• Photos that have a sticky front surface
• Photos that have labels or stickers stuck to them (ones that are
tightly stuck on)
• Photos that have hardened glue or adhesive on them
• Photos on photosensitive paper from instant cameras that are not
sheet-film types
IMPORTANT
• Curled photos should have the curl smoothed and flattened.
• Check that the labels or stickers are tightly stuck on, and that no
glue has oozed out.
Photos that cannot be scanned
Do not scan the following photos.
• Photos that are torn
• Photos that have deteriorated and are very scruffy
• Photos that have staples or clips on them
• Photos that have labels or stickers stuck to them (ones that are not
tightly stuck on)
• Photos that have glue, liquids, oils, or gels on them
• Photos that have not dried after printing
• Photos that have perforations
• Photos smaller than 2" x 2.1" (50.8mm x 54mm)
Dimensions
Loading
capacity
Total thickness of
the photo stack
3R/L
3.5" x 5"
(89 x 127mm)
40
Less than 0.4"
(10mm)
4R/KG
4" x 6"
(102 x 152mm)
40
Less than 0.4"
(10mm)
5R/2L
5" x 7"
(127 x 178mm)
40
Less than 0.4"
(10mm)
8R
8" x 10"
(203 x 254mm)
10
Less than 0.2"
(6mm)
Instant
(Sheet Film
Type only)
Less than 5.8" x
8.2"
(148 x 210mm)
3-
Photo of
using carrier
sheet
Less than 5.8" x
8.2"
(148 x 210mm)
1-
19
Basic Photo Scanning
Step 1: Prepare Photos to be Scanned
1
Use a soft, dry cloth to wipe the front and back of your
photos to remove dust, dirt or other particles that could
potentially scratch your photos.
CAUTION
Because of the speed at which photos are scanned, dust
particles on your photos can cause white lines to appear in
scanned images, and in extreme cases can lightly scratch the
protective finish on your photos. For best results, wipe off the front
and back of your photos before scanning and use microfiber
cloth to clean the scanner rollers after every 300 scans, or even
before each scanning session.
2
Organize your photos by subject, date, or location.
Hint
You can give each batch of photos a custom file name.
Step 2: Place Photos
1
Pull out the document eject tray.
The document eject tray can be adjusted to 3 lengths. Pull out the
document eject tray according to the length of the photo. Also,
erect the document eject stopper on the front edge if necessary.
20
IMPORTANT
Pull the document eject tray forward according to the various
lengths.
2
Pull out the feed support.
Open the feed extension support when placing long photos.
3
Adjust the document guides to fit the width of the photo
to be scanned.
4
Fan your stack of photos to make sure they are not stuck
together.
CAUTION
Stuck photos can feed through the scanner at the same time or
jam in the scanner, potentially damaging your photos.
5
Load your photos in the center of the input tray facedown
and top edge first.
After placing the photo, align the document guides with both
edges of the photo.
Hint
If you have both portrait- and landscape-oriented photos in the
same stack, you can rotate the portrait images after scanning.
IMPORTANT
• When placing photos into the feed tray, take care not to cut your
hand on the edges of the paper.
• Before you place a photo, check to make sure it does not contain
paper clips, staples, or other small metal objects. These items may
cause a fire or electrical shock, damage the document, or cause a
paper jam or scanner malfunction.
• Do not load fragile or irreplaceable photos, or valuable original
documents or artwork, directly into the document feed tray. This
may wrinkle or damage the original. Load these originals one at a
time using a carrier sheet.
21
• Do not wear loose clothing or jewelry that may get caught in the
scanner while you are using it, as this may result in personal injury.
Be extra careful of neckties and long hair. If anything gets caught in
the scanner, immediately turn OFF the power switch, and
disconnect the power cord from the power outlet to stop scanning.
• Always smooth out any folds or curls in your photos before placing
them into the feeder. If the leading edge of a photo is curled, it may
cause a paper jam.
• If feeding stops due to a system error or paper jam while the
scanner is scanning, resolve the problem, make sure that the
scanned image of the last page that was successfully fed has been
stored, and then resume scanning the remaining photos.
• After you finish scanning, push in the document eject tray to prevent
damage to the scanner while it is not being used.
• If double-feeding occurs, press the scanner's DFR button to
continue the scan, or clear the [Detect by Ultrasonic] check box in
the [Feeding] tab on the scanner driver settings screen. (See p. 33)
Step 3: Scan Photos and Save
With this device, you can scan documents by operating the panel
buttons or the applications on a computer.
CaptureOnTouch is a scanning application that enables you to scan a
document with a simple operation merely by selecting the screen
panel.
For details on CaptureOnTouch, see the Help of CaptureOnTouch.
22
1
Set the file name and output folder.
To change output settings including file name and output folder,
click and change settings on the [Output 1] tab. For details, see
the Help of CaptureOnTouch.
2
Click the [Photo scan] button.
The photo is scanned. While scanning is in progress, the number of
pages scanned is displayed in addition to the scanner settings.
When the scan is finished, the [Scanned image preview screen]
opens.
CAUTION
• If you configure scanning conditions that consume a large amount
of the computer's memory, scanning may stop because of
insufficient memory. If an error message appears due to insufficient
memory while scanning is in progress, stop scanning, change the
scanning conditions, and then try scanning again.
• A multiple-page scan cannot be saved when it reaches the file size
of 2 GB. Change the save settings if an error message is displayed.
Hint
If scanning continuously, set the next document, and click the
[Continue scanning] button to start the document scan.
If [Continue scanning] is disabled in the One Touch button settings,
the [Continue scanning] button will not be displayed.
23
3
To check the scanned image, click the [Finish] button.
Hint
If [Edit after scanning] is disabled in the One Touch button settings,
the edit window will not be displayed.
Click the button to edit the output settings.
Click the [Cancel] button to discard the scanned image and return to
the main window.
When the output has finished, a popup window will be displayed. If
saving the scanned image, a link to open the save destination folder
will be displayed.
Hint
If you click [Open storage folder], the folder in which the saved
scanned images were saved opens. Depending on the output
settings, the [Open storage folder] link may not be displayed.
24
Advanced Photo Scanning
Scanning Notes on the Backs of
Photos / Scanning with Carrier Sheet
Scanning Notes on the Backs of Photos
1
Click of the [Photo scan] button.
2
Select [Double-sided] for [Scanning Side] and click the
[Close] button.
25
3
Click the [Photo scan] button to scan the photos.
Scanning with Carrier Sheet
To prevent damage to a photo while scanning it, insert it into an
optional carrier sheet before loading it in the scanner.
1
Set the scanning conditions.
2
Insert the photo into the carrier sheet.
.
3
Load the photo with the sealed end of the carrier sheet as
the leading edge.
After placing the photo, align the photo guides with both edges of
the photo.
CAUTION
If the photo is not placed properly inside the carrier sheet, you
may get a document jam or not get a scan image as intended.
IMPORTANT
• Insert documents straight into the center of the carrier sheet.
Proper scanning will not be possible if the photo is too close to
either side, tilted, or protruding from the carrier sheet.
• When scanning instant photos, put the thick part (enclosed in
red in the illustration) toward the right or left edge of the carrier
sheet. This part might be detected as a double feed error when
it passes through the center rollers of the scanner.
Yes No No No
Yes Yes No No
26
• Carrier sheet is a consumable item. Replace it with a new one
when necessary, if there is visible damage or smudging.
• Before following the steps below, make sure the RS40 driver is
selected in CaptureOnTouch.
1
In CaptureOnTouch, click of the [Photo scan] button.
2
Open the [Document] tab, select the [Enable] check box
for [Use advanced settings dialog box] and click the
[Setting] button.
27
3
Open the [Feeding] tab, and set [Carrier sheet] to [Carrier
sheet].
4
Click the [OK] button to close the settings screen.
1
In CaptureOnTouch, click of the [Photo scan] button.
2
Open the [Document] tab, select the [Enable] check box
for [Use advanced settings dialog box] and click the
[Setting] button.
3
Click the [More] button.
The scanner driver's Detail Settings screen opens.
28
4
Select the [Carrier sheet] check box.
5
Click to close the dialog box.
29
Scanning Documents
How to Place Documents
Scanning multiple documents
Standard paper feeding should be used when scanning multiple
documents of a standard size at one time. Standard paper feeding
enables multiple documents to be fed while separating each page.
1
Pull out the document eject tray.
The document eject tray can be adjusted to 3 lengths. Pull out the
document eject tray according to the length of the document. Also,
erect the document eject stopper on the front edge if necessary.
IMPORTANT
Pull the document eject tray forward according to the various
lengths.
2
Pull out the feed support.
Open the feed extension support when placing long documents.
3
Adjust the document guides to fit the width of the
document to be scanned.
30
4
Place the document.
After placing the document, align the document guides with both
edges of the document.
IMPORTANT
• When placing documents into the feed tray, take care not to cut
your hand on the edges of the paper.
• Before you place a document, check to make sure it does not
contain paper clips, staples, or other small metal objects. These
items may cause a fire or electrical shock, damage the document,
or cause a paper jam or scanner malfunction.
• Do not load fragile or irreplaceable photos, or valuable original
documents or artwork, directly into the document feed tray. This
may wrinkle or damage the original. Load these originals one at a
time using a carrier sheet.
• Do not wear loose clothing or jewelry that may get caught in the
scanner while you are using it, as this may result in personal injury.
Be extra careful of neckties and long hair. If anything gets caught in
the scanner, immediately turn OFF the power switch, and
disconnect the power cord from the power outlet to stop scanning.
• Always smooth out any folds or curls in your documents before
placing them into the feeder. If the leading edge of a document is
curled, it may cause a paper jam.
• If feeding stops due to a system error or paper jam while the
scanner is scanning, resolve the problem, make sure that the
scanned image of the last page that was successfully fed has been
stored, and then resume scanning the remaining document pages.
• After you finish scanning, push in the document eject tray to prevent
damage to the scanner while it is not being used.
• When scanning multiple page documents that are fastened
together, such as invoices, place the documents so that the edge
that is fastened together is facing down.
• If double-feeding occurs, press the scanner's DFR button to
continue the scan, or clear the [Detect by Ultrasonic] check box in
the [Feeding] tab on the scanner driver settings screen. (See p. 33)
Placing Cards
When scanning cards, place one card at a time horizontally.
1
Adjust the document guides to fit the width of the card to
be scanned.
2
Place the card horizontally, with the reverse side facing
you, and the top of the card facing down.
CAUTION
• Place the cards one at a time.
• When scanning cards, place them to be fed horizontally. If you
place cards to be fed vertically, they may not be ejected properly,
and cards that get jammed may be damaged when you remove
them.
31
• When scanning cards, clear the [Detect by Ultrasonic] check box in
the [Feeding] tab on the scanner driver settings screen. (See p. 33)
Setting the Long Document Mode
The length of documents that can be scanned with the scanner is
normally 356 mm (14"), but you can scan documents up to 3,000 mm
(118.1") long by setting the scanner to the Long Document mode.
IMPORTANT
By selecting the Long Document mode and setting the [Page Size]
on the scanner driver settings screen to Auto-detection, documents
of up to 3,000 mm (118.1") in length can be scanned. Note the
following when using the Long Document mode:
• When scanning in the Long Document mode, if the document is
placed on the scanner in a skewed position, it may hit the edges of
the feeding area and be damaged. Be careful to place the
document so that it is not skewed.
• When scanning with the Long Document mode, paper jam
detection may react slowly, resulting in damage to the document.
Be careful to avoid paper jams.
• When scanning long documents, scan the documents one at a time.
• When scanning large-sized documents with the Long Document
mode, scanning may be slower. Errors also occur due to memory
shortage, and scanning may be disabled.
IMPORTANT
Log on to Windows as an Administrator.
1
Click the Start button, and then click [Canon RS40], and
[Canon imageFORMULA Driver Setting Tool].
imageFORMULA Driver Setting Tool starts.
Hint
In Windows 8.1, it is registered at the following location.
32
2
Click the [Control] tab.
3
Click the [Setting] button of [Hardware].
4
Select [Long Document mode (1000 mm)] or [Long
Document mode (3000 mm)] depending on the length of
the document.
5
Click [OK].
6
Click [Close] to close the imageFORMULA Driver Setting
Tool.
33
1
Open the scanner driver's Detail Settings screen.
For details on the setting screen, see the Help of the scanner
driver.
2
Click to display the [Scanner Information] dialog box.
The [Scanner Information] dialog box appears.
3
Click [Maintenance].
The [Maintenance] dialog box appears.
4
Select [Long Document mode (1,000 mm)] or [Long
Document mode (3,000 mm)] depending on the length of
the document.
5
Click to close the dialog box.
Detecting a document double feed
This scanner includes a function to detect document double feeds. By
using this function, the scanner will automatically stop when it detects
that multiple documents have been fed at the same time. You can also
specify whether to save the scanned image after scanning has
finished and continue scanning the document (double feed detection
ignore function).
To use the double feed detection function, you must first open the
scanner driver settings screen and enable double feed detection. It is
also necessary to set [Rapid recovery system] to use the double feed
detection ignore function.
Setting procedure
1
Set the scanning conditions.
2
Place the document as described in the “Scanning
multiple documents” procedure on p. 29.
1
Open the scanner driver's Detail Settings screen.
For details on the setting screen, see the Help of the scanner
driver.
2
Click the [Feeding] tab.
34
3
Select either the [Detect by Length] or the [Detect by
Ultrasonic] check box (or both).
4
To use the double feed detection ignore function, open
the [Others] tab and select the [Rapid recovery system]
check box.
5
Click the [OK] button and close the settings screen.
1
Open the scanner driver's Detail Settings screen.
For details on the setting screen, see the Help of the scanner
driver.
2
Select the [Double Feed Detection] check box, and then
select any one of [Detect by Ultrasonic], [Detect by
Length], and [Detect by Ultrasonic and Length].
3
Click the [More] button when the Double Feed Detection
Ignore function is also used.
The scanner driver's Detail Settings screen opens.
4
Select the [Rapid recovery system] check box.
5
Click to close the dialog box.
35
What to do when a double feed is
detected
When not using the double feed detection ignore function
If a document double feed is detected during scanning, document
feeding stops when the double fed documents are ejected. When this
happens, the following error code is displayed in the Job No. Indicator
of the operating panel.
Also, a message screen is displayed to notify you that a double feed
has been detected.
When this happens, stop the scanning in the application and then
scan the documents again.
When using the double feed detection ignore function
If a document double feed is detected during scanning, document
feeding stops when the double fed documents are ejected. The
following error code is displayed in the Job No. Indicator of the
operating panel, and the DFR button lights.
Also, the [Rapid Recovery System] screen appears to enable you to
specify whether to continue scanning.
Double feed detection error code
Double feed detection error code
36
Buttons of
[Rapid Recovery
System] Screen
Buttons of
Operating
Panel
Description
[SAVE &
CONTINUE]
DFR button
Saves the preview image as a
scanned image and scans the
rest of the document.
[STOP] Stop button
Discards the preview image and
stops scanning.
[DISCARD &
CONTINUE]
Start button
Discards the preview image and
continues scanning. Place the
double fed document again
before clicking this button.
37
How to Scan Documents
Before scanning a document, see the Help of CaptureOnTouch to
learn about CaptureOnTouch.
One Touch Scan
Operations;
Starting CaptureOnTouch -> Selecting a scanner -> Selecting the One
Touch button -> Start scanning
You can register in advance combinations of frequently-used
document selections and output methods as a “One Touch button”.
Just click the One Touch button to implement the scan.
Hint
If you assign an One Touch button to a job number, you can execute
One Touch Scan by selecting the job number from the scanner.
1
Place the document in the scanner.
“How to Place Documents” (See p. 29)
2
Configure the CaptureOnTouch settings.
For details on CaptureOnTouch, see the Help of
CaptureOnTouch.
3
Click the [Scan double-sided] button or [Scan single-
sided] button.
For the procedure hereafter, see “Step 3: Scan Photos and Save” on
p. 21.
38
Maintenance
Daily Maintenance
Clean the scanner on a regular basis, as described below, to maintain
peak scanning quality.
CAUTION
• When cleaning the scanner and the inside of the scanner, turn OFF
the power switch and disconnect the power cord from the power
outlet.
• Do not use spray cleaners to clean the scanner. Precision
mechanisms, such as the light source, may get wet, and cause a
malfunction.
• Never use paint thinner, alcohol, or other organic solvents to clean
the scanner. The exterior of the scanner may become deformed,
discolored, or melted. It may also cause a fire or electric shock.
Cleaning the Scanner
To clean the outside of the scanner, wipe off any dirt with a cloth that
has been dampened with water and thoroughly wrung out, and then
wipe the scanner dry with a clean dry cloth.
Cleaning the Inside of the Scanner
Dust or paper particles inside the scanner may cause lines or
smudges to appear on scanned images. Use compressed air to
periodically clean dust and paper particles from the document feed
opening and the inside of the scanner. After finishing a large scanning
job, turn OFF the scanner and then clean out any paper particles
remaining inside the scanner.
Cleaning the Sensor Glass and the
Rollers
If scanned images contain streaks, or if the scanned documents
become dirty, the sensor glass or rollers inside the scanner may be
dirty. Clean them periodically.
1
Pull the OPEN lever and pull open the front unit toward
you.
2
Use compressed air to remove dust and paper particles
from the inside of the scanner.
39
3
Wipe any dirt off the scanning glass.
Wipe any dirt off the scanning glass with a cloth that has been
dampened with water and thoroughly wrung out, and then wipe
the glass using the included cleaning cloth.
CAUTION
Do not spray water or neutral detergent directly on the scanner.
Precision mechanisms, such as the light source, may get wet,
and cause a malfunction.
IMPORTANT
• Scratches on the sensor glass may cause marks on the images,
as well as feeding errors. If there are scratches on the sensor
glass, contact your local authorized Canon dealer or service
representative.
• Take care to ensure the anti-static brush in the front unit does
not become deformed.
4
Clean the rollers.
Clean the rollers while turning them.
Wipe the rollers with a cloth that has been dampened with water
and thoroughly wrung out, and then wipe them using the included
cleaning cloth.
Scanning Glass
Anti-Static brush
Rollers
40
5
Remove the retard roller and feed roller. (See p. 43, p. 44)
IMPORTANT
Remove the retard roller and feed roller from the scanner to clean
them, and be sure to reattach them to the scanner when cleaning
is finished.
6
Wipe the removed rollers with a cloth that has been
dampened with water and thoroughly wrung out.
7
Reattach the retard roller and feeding roller. (See p. 43,
p. 44)
8
Close the front unit by gently pushing it up on both sides
until it clicks into place. Make sure that the front unit is
completely closed by pushing until you hear a click.
Adjusting the Reduction Ratio
As the rollers installed in the scanner wear out, scanned images may
become stretched in the vertical direction. If this happens, you can
reduce the amount of stretching of the image by adjusting the
reduction ratio.
IMPORTANT
Log on to Windows as an Administrator.
1
Click the Start button, and then click [Canon RS40] and
[Canon imageFORMULA Driver Setting Tool].
imageFORMULA Driver Setting Tool starts.
41
Hint
In Windows 8.1, it is registered at the following location.
2
Click the [Maintenance] tab and then move the slider to
change the value of [Reduction ratio adjustment].
The adjustment value can be set within the range from -3.0% to
3.0%.
3
Click [Apply].
4
Click [Close] to close the imageFORMULA Driver Setting
Tool.
1
Open the scanner driver's Detail Settings screen.
For details on the setting screen, see the Help of the scanner
driver.
2
Click to display the [Scanner Information] dialog box.
42
3
Click [Maintenance] to display the [Maintenance] dialog
box.
4
Change the value of [Reduction ratio adjustment].
The adjustment value can be set within the range from -3.0% to
3.0%.
5
Click to close the dialog box.
Replacing Consumable Parts
The two rollers (feed roller and retard roller) installed in the scanner
are consumable parts. The feed roller and retard roller wear with
scanning. If the feed roller and retard roller are worn, documents may
not feed correctly and paper jams and double feeds may occur.
When the total number of pages fed by the scanner exceeds the
number of pages for the service life of the rollers, a message
prompting you to replace the rollers is displayed when the computer is
started.
If this message begins to be displayed at startup, purchase an
exchange roller kit and replace the worn parts with the consumable
parts included in the kit (feed roller and retard roller). See p. 60 for
details about the exchange roller kit.
Furthermore, the counter in the scanner that records the number of
pages fed also needs to be reset when you replace the rollers. (See
p. 45)
Hint
Even before it becomes time to replace the rollers, scanned images
may become stretched in the vertical direction due to wear of the
rollers. If this happens, adjust the reduction ratio. (See p. 40)
43
Opening and Closing the Front Unit
1
Pull the OPEN lever and pull open the front unit toward
you.
Hint
The location of each of the consumable parts is shown below.
2
When closing the front unit, make sure that it is
completely closed by gently pressing the left and right
until you hear a click.
Replacing the Feed Roller
1
Open the roller cover.
Retard roller (inside
the front unit)
Feed Roller
44
2
Remove the feed roller.
3
Install the new feed roller.
4
Close the roller cover.
Replacing the Retard Roller
1
Open the roller cover.
2
Pull the left lever that secures the retard roller to the
scanner, and remove the roller.
▼
45
3
Install the new retard roller by inserting the right side
first.
4
Push the left side of the retard roller to secure it to the
scanner.
5
Close the roller cover.
Resetting the counter
IMPORTANT
Log on to Windows as an Administrator.
1
Click the Start button, and then click [Canon RS40], and
[Canon imageFORMULA Driver Setting Tool].
imageFORMULA Driver Setting Tool starts.
Hint
In Windows 8.1, it is registered at the following location.
46
2
Click the [Maintenance] tab and then select [Reset].
The counter resets.
3
Click [Close] to close the imageFORMULA Driver Setting
Tool.
1
Open the scanner driver's Detail Settings screen.
For details on the setting screen, see the Help of the scanner
driver.
2
Click to display the [Scanner Information] dialog box.
3
Click [Maintenance] to display the [Maintenance] dialog
box.
4
Click [Reset].
5
Click to close the dialog box.
47
Auto Power Off Setting
The scanner automatically turns off if 4 hours elapse without scanning
or another operation being performed.
To disable this setting, follow the procedure below.
IMPORTANT
Log on to Windows as an Administrator.
1
Click the Start button, and then click [Canon RS40], and
[Canon imageFORMULA Driver Setting Tool].
imageFORMULA Driver Setting Tool starts.
Hint
In Windows 8.1, it is registered at the following location.
2
Click the [Control] tab.
3
Click the [Setting] button of [Hardware].
4
Clear the [Turn off automatically after 4 hours] check box.
48
5
Click [OK].
6
Click [Close] to close the imageFORMULA Driver Setting
Tool.
Removing the Document Feed Tray
When you will store or otherwise not use the scanner for a long period
of time, remove the document feed tray.
About the Canon imageFORMULA
Driver Setting Tool
What is Canon imageFORMULA Driver
Setting Tool?
The Canon imageFORMULA Driver Setting Tool can be used to
check the information of the scanner, or to configure the maintenance
settings.
Canon imageFORMULA Driver Setting Tool consists of the following
tabs.
[Information] tab
You can check the firmware’s version information and scanner
information.
[Maintenance] tab
You can reset the counter of the roller, or carry out the shrinkage rate
control.
[Control] tab
You can carry out the control settings of hardware and drivers, and
perform the read or write of the control settings.
From the configuration of the hardware, you can set the automatic
power-off function.
[Diagnosis] tab
You can output or delete the log file.
Start-up of the Canon imageFORMULA
Driver Setting Tool
Click the Start button, then click [Canon RS40] - [Canon
imageFORMULA Driver Setting Tool] in that order.
Canon imageFORMULA Driver Setting Tool will start.
Hint
In Windows 8.1, it is registered at the following location.
49
50
Troubleshooting
Common Problems and Solutions
This section provides recommended solutions to common problems.
If you have a problem that is not solved by the following, contact your
local authorized Canon dealer.
Problem 1 The scanner will not turn on.
Solutions Confirm that the AC adapter is plugged firmly into a
power outlet.
Problem 2 The scanner is not recognized.
Solutions (1) Confirm that the scanner is properly connected to
the computer with a USB cable.
(2) Confirm that the scanner is turned on. See the
previous problem (1) if the scanner does not turn
on.
(3) The computer’s USB interface may not support the
scanner. The scanner cannot be guaranteed to
work with all USB interfaces.
(4) Confirm that the supplied USB cable is used to
connect the scanner to the computer. The scanner
cannot be guaranteed to work with all available
USB cables.
(5) If the scanner is connected to the computer via a
USB hub, try removing the hub and connecting
directly to the computer.
Problem 3 Documents feed askew (scanned images are
slanted).
Solutions (1) Align the document guides to fit the documents as
closely as possible, and load the documents so that
they feed straightly.
(2) Open the document feed extension support and
place the document.
(3) Enable [Automatically straightens skewed] in the
scanner driver settings.
(4) If many pages have been scanned since roller
cleaning, clean the rollers. If documents still feed
askew, roller replacement or other maintenance
may be needed. See “Maintenance” on p. 38 for
roller replacement procedures.
Problem 4 Documents are not scanned according to the
settings configured in the scanner driver.
Solutions When you scan using [Select document] panel
registered with CaptureOnTouch, the CaptureOnTouch
settings have priority over the scanner driver settings.
Edit settings in the [Select document] panel, or create a
new [Select document] panel using the desired
scanning conditions.
Problem 5 If white lines or streaks appear in scanned images.
Solutions Clean both sides of the scanner glass, and the rollers.
If a sticky substance such as glue or correction fluid is
found, carefully wipe with just enough pressure to clean
the area where the lines appear. If the problem cannot
be solved by cleaning, the internal glass may be
scratched. Contact your local authorized Canon dealer.
51
Problem 6 Pages are missing.
Solutions When the scanner driver’s [Scanning Side] setting is
[Skip Blank Page], documents with very little black may
be unintentionally skipped. Decrease the Set the
likelihood of skipping blank page value or set the
[Scanning Side] to another mode, such as simplex or
duplex.
If pages are skipped due to the document double
feeding, see "Problem 7 Documents jam (or double-
feed)."
Problem 7 Documents jam (or double-feed).
Solutions (1) If the roller has been installed correctly, clean it if
necessary.
(2) Proper scanning may not be possible when
document pages stick together due to static
electricity. Fan the documents before you load
them.
(3) Manually feed the scanner one page at a time.
Problem 8 Multiple pages of scanned images cannot be saved
to a single file.
Solutions • Depending on the file format, multiple scanned image
pages cannot be saved as a single file with
CaptureOnTouch.
File type Processing for multiple pages
BMP, JPEG
Scanned images are always saved one
page per file.
PPTX
Multi-page images are always saved to
a single file.
TIFF, PDF
You can save multiple pages to a single
file by clicking and selecting [Save
all pages as one file] in the displayed
dialog box.
Problem 9 All of the placed documents have been scanned,
but the scanned image does not appear on the
application.
Solutions When [Panel-Feeding] or [Automatic Feeding] is
selected as the feeding method on the scanner driver's
Detail Settings screen, a scanning operation will not
continue after all of the documents are fed, as the
scanner awaits additional documents to be fed. You
can finish the operation and send the scanned images
to the application by pressing the Stop button on the
operating panel.
Problem 10 Memory becomes insufficient and scanning stops.
Solutions If you configure scanning conditions that use a large
amount of the computer’s memory, scanning may stop
because of insufficient memory. Although this depends
on the computer’s memory size, the possibility of
insufficient memory increases if any of the following
scanning conditions overlap.
• [Color Mode] is set to [24-bit Color]
• A large page size (e.g. Legal) is specified as the
[Page Size]. Alternatively, the page size is set to
[Scanner’s Maximum].
• A high resolution (600dpi etc.) is specified for [Dots
per inch].
If an error message appears due to insufficient memory
while scanning is in progress, exit the application,
change the scanning conditions (e.g. reduce the
resolution or page size) and then try scanning again. In
addition, the amount of memory used can be contained
by turning off [Moire Reduction] and [Prevent Bleed
Through/Remove Background] if they are set to on.
Problem 11 Double-feeding occurs when scanning a document
with multiple pages.
Solutions Press the scanner's DFR button to continue the scan,
or clear the [Detect by Ultrasonic] check box on the
scanner driver settings screen.
For details on the setting screen, see the Help of the
scanner driver.
52
Problem 12 The size detection and deskew functions fail.
Solutions When [Carrier sheet] is set to [Carrier sheet] in the
[Feeding] tab of the scanner driver settings screen and
you scan a document with black edges without
inserting it in a carrier sheet, the size detection and
deskew functions may fail. In such cases, disable the
size detection and deskew functions, or set [Carrier
sheet] to [None] in the [Feeding] tab.
Problem 13 Photos do not feed correctly.
Solutions • If the photos are curled, flatten them until the curl is
less than 2 mm.
• Photos may stick together, depending on the
thickness and type of paper used for the photo. If they
stick together, feed them one at a time.
• Reduce the number of photos loaded at one time.
Problem 14 Double feed error occurs because of instant photo.
Solutions Instant photos are made with a combination of layers,
so they may be incorrectly judged to be a double-feed.
If this happens, disable double-feed detection.
53
Software Troubleshooting
This section describes troubleshooting problems and solutions for
operating the supplied software (CaptureOnTouch).
If scanning is too slow
(1) Close other running programs, if any.
(2) Scanning can be slowed down by memory shortage caused by
memory-resident applications such as anti-virus programs. Close
such memory-resident programs if necessary to free up memory
space.
(3) When insufficient hard disk space is available, the scanner may
be unable to create the necessary temporary files for scanned
data. Delete unneeded data on the hard disk to free up more
space.
(4) Scanning is slow if the computer’s USB port is not Hi-Speed USB
2.0 compliant.
(5) If using a common USB cable that is not Hi-Speed USB 2.0
compliant, replace the cable with the supplied compliant cable.
(6) When the scanner is connected to the computer via a USB hub
that is not Hi-Speed USB 2.0 compliant, remove the hub and
connect the scanner directly to the computer.
If scanned image files cannot be opened in an application
(1) Scanned images saved as multi-page TIFF files can be opened
only by programs that support this file format.
(2) Images saved as compressed TIFF files (single- as well as multi-
page) can only be opened by programs that support the
compressed format. This can occur with programs that are not
compatible with CaptureOnTouch. In this case, select “None” as
the image file compression format before scanning.
There is a display glitch on the UI screen of CaptureOnTouch.
Depending on the computer that you are using, a display glich may
occur on the UI screen when there are too many Scan mode panels,
Select output panels, or One Touch buttons. Delete any panels and
buttons that you will not use.
54
Useful tips
Here are some useful tips for scanning documents.
Where are scanned images saved? Can the save destination be
changed?
All destination locations can be changed to other folders.
Both Standard Scanning and One Touch Scan save the output to the
destination set in the [Select output] panel.
How are the scan settings configured?
By clicking the Edit button ([ ]) in the [Select document] panel, you
can edit the scan settings when the [Select document edit screen]
opens.
How do I save multiple pages in one file, or save one file per
page?
When scanned images are saved in BMP (PICT) or JPEG format,
each image is always saved in a separate file.
When scanned images are saved in PDF or TIFF format, you can
specify multi- or single-page files. See also “Problem 8” in “Common
Problems and Solutions”.
Can I copy or back up scanner setting configurations?
The setting configurations can be backed up and restored using [Back
Up/Restore] on the [Maintenance] tab on the [Settings] dialog box.
What rules apply to scanned image file names?
For both Standard Scanning and One Touch Scan, the file names of
scanned images are set based on the settings in the [Select output]
panel. This screen opens when you click the Edit button ([ ]) in the
[Select output] panel.
Click the [Detail Settings] button on this screen. You can set the file
names of scanned images by setting all or some of the three items
shown below.
A sample file name is displayed as the [File name] in the [File name
settings] dialog box.
How can I skip blank pages, and scan only non-blank pages?
Specify [Skip Blank Page] on the scanner driver setting screen, then
scan.
How do I scan cards?
Set a card in landscape orientation in the scanner. Specify the same
size as the card (or [Auto]), then scan. For details on the setting
screen, see the Help of the scanner driver.
How do I print scanned data?
• For both Standard Scanning and One Touch Scan, select [Print] in
the [Select output] panel.
• To use this function, you need to install a plug-in.
• The plug-in can be installed by selecting its checkbox when installing
CaptureOnTouch.
I want to save to other folders
• In CaptureOnTouch, destinations other than [Save to folder] are
provided as a plug-in.
• By installing the plug-in, the scanned image can be printed, attached
in an e-mail, or shared using various cloud services.
• The plug-in can be installed by selecting its checkbox when installing
CaptureOnTouch.
Setting Description
File name
Any specified text string to be included in the file
name.
Add date and
time
Appends the date and time to file names. Select
the date format from the list box. YYYY = year,
MM = month, and DD = day of month. The time
is appended after the date.
Add counter to
file name
Append serial numbers in the order of scanned
image saving. Specify the number of digits and
starting number.
55
• The available output destinations vary depending on the installed
plug-in.
How can I attach scanned data to an e-mail (or send it as e-mail)?
• For both Standard Scanning and One Touch Scan, select [Attach to
E-mail] in the [Select output] panel.
• To use this function, you need to install a plug-in.
• The plug-in can be installed by selecting its checkbox when installing
CaptureOnTouch.
56
Clearing a Paper Jam
When paper jams are detected during scanning, the following error
codes are displayed in the scanner’s display panel and scanning is
interrupted.
When a paper jam or double feed occurs during scanning, use the
following procedures to clear them.
CAUTION
Be careful when removing jammed paper. Take care not to cut your
hand on the edges of the paper.
1
Remove any documents that have been left in the feed
Tray.
2
Pull the OPEN lever and pull open the front unit toward
you.
Hint
The “C” error code appears in the operating panel when the front
unit is open.
3
Remove the jammed document.
Paper jam error code
57
IMPORTANT
Make sure to pull the document out carefully, without applying too
much force. If the jammed paper tears while you are pulling it out,
make sure to remove any remaining pieces from inside the
scanner.
4
Close the front unit by gently pushing it up on both sides
until it clicks into place. Make sure that the front unit is
completely closed by pushing until you hear a click.
After removing the jammed paper, check to see if the last page
was scanned correctly, and then continue scanning.
Hint
When the [Rapid recovery system] check box is enabled in the
scanner driver settings screen, you can resume a scanning operation
even if it is interrupted by a paper jam by removing the document and
resuming from the document that was being fed when the interruption
occurred.
As the image of the document that was being fed at the time of the
interruption may not be saved in such cases, be sure to verify the last
scanned image before resuming the operation.
58
Uninstalling the Software
If the TWAIN driver or CaptureOnTouch is not operating normally,
follow the procedure below to uninstall them. Then, re-install the
software. See Setup Guide.
IMPORTANT
Log on to Windows as an Administrator.
1
From the Windows task bar, click the [Start] button and
then [Control Panel].
2
Click [Uninstall a program].
The [Uninstall or change a program] dialog box appears.
3
From the Programs list, select the software you want to
remove and then click [Remove].
The delete confirmation screen appears.
4
Click [Yes].
Uninstallation of the software is now complete.
No uninstaller is provided for macOS drivers. To uninstall, use
Finder to delete the following files.
/Library/Image Capture/TWAIN Data Sources/RS40
/Applications/CaptureOnTouch
59
Appendix
Specifications
Main Unit
Type Desktop sheetfed scanner
Scanning Document Size
Size: Width: 2" to 8.5" (50.8 mm to 216 mm)
Length: 2.1" to 14" (54 mm to 356 mm) (You can
scan documents up to 118.1" (3,000 mm) long by
setting the scanner to the Long Document mode.)
Paper weight: 27 to 209 g/m
2
(7 to 56 lb bond) 0.00157" to
0.00984" (0.04 mm to 0.25 mm)
Loading capacity:
Photo 3.5" × 5" (89 × 127 mm), 4" × 6" (102 × 152 mm),
or 5" × 7" (127 × 178 mm): 40 photos
8" × 10" (203 × 254 mm): 10 photos
Instant: 3 photos
Document A4 size or smaller: 60 sheets (80g/m
2
(22 lb
bond))
Larger than A4 size: 40 sheets (80g/m
2
(22 lb
bond))
Make sure stacks do not exceed 6 mm in height for
either of the above.
Scanning Sensor Contact image sensor
Light source LED
Scanning Side Simplex/duplex
Scanning modes Black and White, Error Diffusion, 256-level
Grayscale, Advanced Text Enhancement,
Advanced Text Enhancement II, 24-bit Color
Scanning resolution (Primary Scan Lines x Secondary Scan Lines)
100 x 100dpi/150 x 150dpi/200 x 200dpi/240 x
240dpi/300 x 300dpi/400 x 400dpi/600 x 600dpi/
1200 x 1200dpi
Interface Hi-Speed USB 2.0
Other functions Folio scanning, double feed detection ignore
External Dimensions
11.46" (291 mm) (W) x 9.84" (250 mm) (D) x 9.65"
(245 mm) (H) (With the feed tray attached and the
document eject tray pushed in)
11.46" (291 mm) (W) x 23.62" (600 mm) (D) x
15.04" (382 mm) (H) (With the feed tray attached
and the document eject tray pulled out)
Weight (without AC adapter)
Approximately 3.0 kg (6.6 lb)
Power Supply (using AC adapter)
DC24V 0.7A
Power Consumption
Scanning: Maximum 19.0W
In the Sleep mode: Maximum 1.4W
With power switch OFF: Maximum 0.1W
Noise Not more than 48 dB
Operating Environment
Temperature: 10°C to 32.5°C (50°F to 90.5°F)
Humidity: 20% to 80% RH
AC Adapter (100 to 240 V type)
Model Number MG1-5039 (24V)
Input AC100 to 240V, 50/60 Hz, 1.06 to 0.6 A
Output DC24V 2.0A
Weight Approximately 0.3kg (0.66 lb)
Specifications are subject to change without notice due to product
improvements.
60
Replacement parts
Exchange roller kit (product code: 5595C001)
Kit to replace the rollers (feed roller, retard roller).
• For the replacement procedure, see “Replacing Consumable Parts”
on p. 42.
• Contact your local authorized Canon dealer or service
representative for detailed information about the replacement parts.
Consumables
Carrier Sheet (product code: 5349C001)
This is a carrier sheet for small, delicate or important photos.
• For the detail, see “Scanning with Carrier Sheet” on p. 25.
Dimensions
245 mm
(9.65")
291 mm (11.46")
600 mm (23.62")
382 mm
(15.04")
61
Index
A
Adjusting the Reduction Ratio .................................................... 40
Auto Power Off
........................................................................... 47
C
CaptureOnTouch
One Touch Scan
.................................................................. 37
Card
Loading method
................................................................... 30
Care and cleaning
...................................................................... 38
Carrier sheet
.............................................................................. 25
Counter
...................................................................................... 45
D
DFR button ................................................................................. 17
Document
Card
..................................................................................... 30
Loading method
................................................................... 29
Double Feed Detection
.............................................................. 33
F
Feed roller ............................................................................42, 43
Front unit
.................................................................................... 43
J
Job No. display ........................................................................... 17
Job Select button
....................................................................... 17
L
Long Document Mode ................................................................ 31
O
Operating Panel ......................................................................... 17
P
Paper jam ................................................................................... 56
Power supply
................................................................................ 9
R
Reduction ratio adjustment ........................................................ 40
Resetting the counter
................................................................. 45
Retard roller
......................................................................... 42, 44
Roller
.......................................................................................... 39
Cleaning
............................................................................... 38
Replace
................................................................................ 42
S
Scanning glass ........................................................................... 39
Cleaning
............................................................................... 38
Start Button
................................................................................ 17
Stop Button
................................................................................. 17
U
Uninstall ...................................................................................... 58
62
WEEE CAUTION
English
Only for European Union and EEA (Norway, Iceland and
Liechtenstein)
This symbol indicates that this product is not to be disposed of with
your household waste, according to the WEEE Directive (2012/19/EU)
and national legislation. This product should be handed over to a
designated collection point, e.g., on an authorized one-for-one basis
when you buy a new similar product or to an authorized collection site
for recycling waste electrical and electronic equipment (EEE).
Improper handling of this type of waste could have a possible negative
impact on the environment and human health due to potentially
hazardous substances that are generally associated with EEE. At the
same time, your cooperation in the correct disposal of this product will
contribute to the effective usage of natural resources. For more
information about where you can drop off your waste equipment for
recycling, please contact your local city office, waste authority,
approved WEEE scheme or your household waste disposal service.
For more information regarding return and recycling of WEEE
products, please visit www.canon-europe.com/weee
.
Français
Union Européenne, Norvège, Islande et Liechtenstein
uniquement.
Ce symbole indique que ce produit ne doit pas être jeté avec les
ordures ménagères, conformément à la directive DEEE (2012/19/UE)
et à la réglementation de votre pays. Ce produit doit être confié au
distributeur à chaque fois que vous achetez un produit neuf similaire,
ou à un point de collecte mis en place par les collectivités locales pour
le recyclage des Déchets des Équipements Électriques et
Électroniques (DEEE). Le traitement inapproprié de ce type de déchet
risque d'avoir des répercussions sur l'environnement et la santé
humaine, du fait de la présence de substances potentiellement
dangereuses généralement associées aux équipements électriques
et électroniques. Parallèlement, votre entière coopération dans le
cadre de la mise au rebut correcte de ce produit favorisera une
meilleure utilisation des ressources naturelles. Pour plus
d'informations sur les points de collecte des équipements à recycler,
contactez vos services municipaux, les autorités locales
compétentes, le plan DEEE approuvé ou le service d'enlèvement des
ordures ménagères. Pour plus d'informations sur le retour et le
recyclage des produits DEEE, consultez le site: www.canon-
europe.com/weee.
Deutsch
Nur für Europäische Union und EWR (Norwegen, Island
und Liechtenstein)
Dieses Symbol weist darauf hin, dass dieses Produkt gemäß der EU-
Richtlinie über Elektro- und Elektronik-Altgeräte (2012/19/EU) und
nationalen Gesetzen nicht über den Hausmüll entsorgt werden darf.
Dieses Produkt muss bei einer dafür vorgesehenen Sammelstelle
abgegeben werden. Dies kann z. B. durch Rückgabe beim Kauf eines
ähnlichen Produkts oder durch Abgabe bei einer autorisierten
Sammelstelle für die Wiederaufbereitung von Elektro- und Elektronik-
Altgeräten geschehen. Der unsachgemäße Umgang mit Altgeräten
kann aufgrund potentiell gefährlicher Stoffe, die generell mit Elektro-
und Elektronik-Altgeräten in Verbindung stehen, negative
Auswirkungen auf die Umwelt und die menschliche Gesundheit
haben. Durch die umweltgerechte Entsorgung dieses Produkts tragen
63
Sie außerdem zu einer effektiven Nutzung natürlicher Ressourcen
bei. Informationen zu Sammelstellen für Altgeräte erhalten Sie bei
Ihrer Stadtverwaltung, dem öffentlich-rechtlichen Entsorgungsträger,
einer autorisierten Stelle für die Entsorgung von Elektro- und
Elektronik-Altgeräten oder Ihrem örtlichen Entsorgungsunternehmen.
Weitere Informationen zur Rückgabe und Entsorgung von Elektro-
und Elektronik-Altgeräten finden Sie unter www.canon-europe.com/
weee.
Italiano
Solo per Unione Europea e SEE (Norvegia, Islanda e
Liechtenstein)
Questo simbolo indica che il prodotto deve essere oggetto di raccolta
separata in conformità alla Direttiva RAEE (2012/19/UE) e alla
normativa locale vigente. Il prodotto deve essere smaltito presso un
centro di raccolta differenziata, un distributore autorizzato che applichi
il principio dell'"uno contro uno", ovvero del ritiro della vecchia
apparecchiatura elettrica al momento dell'acquisto di una nuova, o un
impianto autorizzato al riciclaggio dei rifiuti di apparecchiature
elettriche ed elettroniche. La gestione impropria di questo tipo di rifiuti
può avere un impatto negativo sull'ambiente e sulla salute umana
causato dalle sostanze potenzialmente pericolose che potrebbero
essere contenute nelle apparecchiature elettriche ed elettroniche. Un
corretto smaltimento di tali prodotti contribuirà inoltre a un uso efficace
delle risorse naturali ed eviterà di incorrere nelle sanzioni
amministrative di cui all'art. 255 e successivi del Decreto Legislativo
n. 152/06. Per ulteriori informazioni sullo smaltimento e il recupero dei
Rifiuti di Apparecchiature Elettriche ed Elettroniche, consultare la
Direttiva RAEE, rivolgersi alle autorità competenti, oppure visitare il
sito www.canon-europe.com/weee
.
Español
Sólo para la Unión Europea y el Área Económica Europea
(Noruega, Islandia y Liechtenstein)
Este símbolo indica que este producto no debe desecharse con los
desperdicios domésticos, de acuerdo con la directiva RAEE (2012/19/
UE) y con la legislación nacional. Este producto debe entregarse en
uno de los puntos de recogida designados, como por ejemplo,
entregándolo en el lugar de venta al comprar un producto similar o
depositándolo en un lugar de recogida autorizado para el reciclado de
residuos de aparatos eléctricos y electrónicos (RAEE). La
manipulación inapropiada de este tipo de desechos podría tener un
impacto negativo en el entorno y la salud humana, debido a las
sustancias potencialmente peligrosas que normalmente están
asociadas con los RAEE. Al mismo tiempo, su cooperación a la hora
de desechar correctamente este producto contribuirá a la utilización
eficaz de los recursos naturales. Para más información sobre cómo
puede eliminar el equipo para su reciclado, póngase en contacto con
las autoridades locales, con las autoridades encargadas de los
desechos, con un sistema de gestión RAEE autorizado o con el
servicio de recogida de basuras doméstico. Si desea más información
acerca de la devolución y reciclado de RAEE, visite la web
www.canon-europe.com/weee
.
Nederlands
Uitsluitend bestemd voor de Europese Unie en EER
(Noorwegen, IJsland en Liechtenstein)
Dit symbool geeft aan dat dit product in overeenstemming met de
AEEA-richtlijn (2012/19/EU) en de nationale wetgeving niet mag
worden afgevoerd met het huishoudelijk afval. Dit product moet
worden ingeleverd bij een aangewezen, geautoriseerd inzamelpunt,
bijvoorbeeld wanneer u een nieuw gelijksoortig product aanschaft, of
bij een geautoriseerd inzamelpunt voor hergebruik van elektrische en
elektronische apparatuur (EEA). Een onjuiste afvoer van dit type afval
kan leiden tot negatieve effecten op het milieu en de volksgezondheid
als gevolg van potentieel gevaarlijke stoffen die veel voorkomen in
elektrische en elektronische apparatuur (EEA). Bovendien werkt u
door een juiste afvoer van dit product mee aan het effectieve gebruik
van natuurlijke hulpbronnen. Voor meer informatie over waar u uw
afgedankte apparatuur kunt inleveren voor recycling kunt u contact
opnemen met het gemeentehuis in uw woonplaats, de
reinigingsdienst, of het afvalverwerkingsbedrijf. U kunt ook het
schema voor de afvoer van afgedankte elektrische en elektronische
apparatuur (AEEA) raadplegen. Ga voor meer informatie over het
inzamelen en recyclen van afgedankte elektrische en elektronische
apparatuur naar www.canon-europe.com/weee
.
64
Dansk
Gælder kun i Europæiske Union og EØS (Norge, Island og
Liechtenstein)
Dette symbol angiver, at det pågældende produkt ikke må bortskaffes
sammen med dagrenovation jf. direktivet om affald af elektrisk og
elektronisk udstyr (WEEE) (2012/19/EU) og gældende national
lovgivning. Det pågældende produkt skal afleveres på et nærmere
specificeret indsamlingssted, f.eks. i overensstemmelse med en
godkendt én-til-én-procedure, når du indkøber et nyt tilsvarende
produkt, eller produktet skal afleveres på et godkendt indsamlingssted
for elektronikaffald. Forkert håndtering af denne type affald kan
medføre negative konsekvenser for miljøet og menneskers helbred på
grund af de potentielt sundhedsskadelige stoffer, der generelt kan
forefindes i elektrisk og elektronisk udstyr. Når du foretager korrekt
bortskaffelse af det pågældende produkt, bidrager du til effektiv brug
af naturressourcerne. Yderligere oplysninger om, hvor du kan
bortskaffe dit elektronikaffald med henblik på genanvendelse, får du
hos de kommunale renovationsmyndigheder. Yderligere oplysninger
om returnering og genanvendelse af affald af elektrisk og elektronisk
udstyr får du ved at besøge www.canon-europe.com/weee
.
Norsk
Gjelder kun den europeiske union og EØS (Norge, Island
og Liechtenstein)
Dette symbolet indikerer at dette produktet ikke skal kastes sammen
med husholdningsavfall, i henhold til WEEE-direktiv (2012/19/EU) og
nasjonal lov. Produktet må leveres til et dertil egnet innsamlingspunkt,
det vil si på en autorisert en-til-en-basis når du kjøper et nytt lignende
produkt, eller til et autorisert innsamlingssted for resirkulering av avfall
fra elektrisk og elektronisk utstyr (EE-utstyr). Feil håndtering av denne
typen avfall kan være miljø- og helseskadelig på grunn av potensielt
skadelige stoffer som ofte brukes i EE-utstyr. Samtidig bidrar din
innsats for korrekt avhending av produktet til effektiv bruk av
naturressurser. Du kan få mer informasjon om hvor du kan avhende
utrangert utstyr til resirkulering ved å kontakte lokale myndigheter, et
godkjent WEEE-program eller husholdningens renovasjonsselskap.
Du finner mer informasjon om retur og resirkulering av WEEE-
produkter på www.canon-europe.com/weee
.
Suomi
Vain Euroopan unionin sekä ETA:n (Norja, Islanti ja
Liechtenstein) alueelle.
Tämä tunnus osoittaa, että sähkö- ja elektroniikkalaiteromua koskeva
direktiivi (SER-direktiivi, 2012/19/EU) sekä kansallinen lainsäädäntö
kieltävät tuotteen hävittämisen talousjätteen mukana. Tuote on
vietävä asianmukaiseen keräyspisteeseen, esimerkiksi
kodinkoneliikkeeseen uutta vastaavaa tuotetta ostettaessa tai
viralliseen sähkö- ja elektroniikkalaiteromun keräyspisteeseen.
Sähkö- ja elektroniikkalaiteromun virheellinen käsittely voi
vahingoittaa ympäristöä ja ihmisten terveyttä, koska laitteet saattavat
sisältää ympäristölle ja terveydelle haitallisia aineita. Lisäksi tuotteen
asianmukainen hävittäminen säästää luonnonvaroja. Lisätietoja
sähkö- ja elektroniikkalaiteromun keräyspisteistä saat kaupunkien ja
kuntien tiedotuksesta, jätehuoltoviranomaisilta, sähkö- ja
elektroniikkalaiteromun kierrätysjärjestelmän ylläpitäjältä ja
jätehuoltoyhtiöltä. Lisätietoja sähkö- ja elektroniikkalaiteromun
keräyksestä ja kierrätyksestä on osoitteessa www.canon-
europe.com/weee.
Svenska
Endast för Europeiska unionen och EES (Norge, Island
och Liechtenstein)
Den här symbolen visar att produkten enligt WEEE-direktivet (2012/
19/EU) och nationell lagstiftning inte får sorteras och slängas som
hushållsavfall. Den här produkten ska lämnas in på en därför avsedd
insamlingsplats, t.ex. på en återvinningsstation auktoriserad att
hantera elektrisk och elektronisk utrustning (EE-utrustning) eller hos
handlare som är auktoriserade att byta in varor då nya, motsvarande
köps (en mot en). Olämplig hantering av avfall av den här typen kan
ha en negativ inverkan på miljön och människors hälsa på grund av
de potentiellt farliga ämnen som kan återfinnas i elektrisk och
elektronisk utrustning. Din medverkan till en korrekt avfallshantering
65
av den här produkten bidrar dessutom till en effektiv användning av
naturresurserna. Kontakta ditt lokala kommunkontor, berörd
myndighet, företag för avfallshantering eller ta del av en godkänd
WEEE-organisation om du vill ha mer information om var du kan
lämna den kasserade produkten för återvinning. För mer information
om inlämning och återvinning av WEEE-produkter, se www.canon-
europe.com/weee.
Português
Apenas para a União Europeia e AEE (Noruega, Islândia e
Liechtenstein)
Este símbolo indica que o produto não deve ser colocado no lixo
doméstico, de acordo com a Diretiva REEE (2012/19/UE) e a
legislação nacional. Este produto deverá ser colocado num ponto de
recolha designado, por exemplo, num local próprio autorizado quando
adquirir um produto semelhante novo ou num local de recolha
autorizado para reciclar resíduos de equipamentos eléctricos e
eletrónicos (EEE). O tratamento inadequado deste tipo de resíduo
poderá causar um impacto negativo no ambiente e na saúde humana
devido às substâncias potencialmente perigosas normalmente
associadas aos equipamentos elétricos e electrónicos.
Simultaneamente, a sua cooperação no tratamento correto deste
produto contribuirá para a utilização eficaz dos recursos naturais.
Para mais informações sobre os locais onde o equipamento poderá
ser reciclado, contacte os serviços locais, a autoridade responsável
pelos resíduos, o esquema REEE aprovado ou o serviço de
tratamento de lixo doméstico. Para mais informações sobre a
devolução e reciclagem de produtos REEE, vá a www.canon-
europe.com/weee.
Česká
Pouze Evropská unie a EHP (Norsko, Island a
Lichtenštejnsko)
Tento symbol znamená, že podle směrnice o OEEZ (2012/19/EU) a
podle vnitrostátních právních předpisů nemá být tento výrobek
likvidován s odpadem z domácností. Tento výrobek má být vrácen do
sběrného místa, např. v rámci autorizovaného systému odběru
jednoho výrobku za jeden nově prodaný podobný výrobek nebo v
autorizovaném sběrném místě pro recyklaci odpadních elektrických a
elektronických zařízení (OEEZ). Nevhodné nakládání s tímto druhem
odpadu by mohlo mít negativní dopad na životní prostředí a lidské
zdraví, protože elektrická a elektronická zařízení zpravidla obsahují
potenciálně nebezpečné látky. Vaše spolupráce na správné likvidaci
tohoto výrobku současně napomůže efektivnímu využívání přírodních
zdrojů. Další informace o místech sběru vašeho odpadního zařízení k
recyklaci vám sdělí místní úřad vaší obce, správní orgán vykonávající
dozor nad likvidací odpadu, sběrny OEEZ nebo služba pro odvoz
komunálního odpadu. Další informace týkající se vracení a recyklace
OEEZ naleznete na adrese www.canon-europe.com/weee
.
Eλληνικά
Μόνο για την Ευρωπαϊκή Ένωση και τον ΕΟΧ (Νορβηγία,
Ισλανδία και Λιχτενστάιν)
Αυτό το σύμβολο υποδηλώνει ότι αυτό το προϊόν δεν πρέπει να
απορρίπτεται μαζί με τα οικιακά απορρίμματα, σύμφωνα με την
Οδηγία σχετικά με τα Απόβλητα Ηλεκτρικού και Ηλεκτρονικού
Εξοπλισμού (ΑΗΗΕ) (2012/19/ΕΕ) και την εθνική σας νομοθεσία.
Αυτό το προϊόν πρέπει να παραδίδεται σε καθορισμένο σημείο
συλλογής, π.χ. σε μια εξουσιοδοτημένη βάση ανταλλαγής όταν
αγοράζετε ένα νέο παρόμοιο προϊόν ή σε μια εξουσιοδοτημένη θέση
συλλογής για την ανακύκλωση των αποβλήτων Ηλεκτρικού και
Ηλεκτρονικού Εξοπλισμού (ΗΗΕ). Ο ακατάλληλος χειρισμός αυτού
του τύπου αποβλήτων μπορεί να έχει αρνητικό αντίκτυπο στο
περιβάλλον και την υγεία του ανθρώπου, λόγω δυνητικώς
επικίνδυνων ουσιών που γενικά συνδέονται με τον ΗΗΕ. Ταυτόχρονα,
η συνεργασία σας όσον αφορά τη σωστή απόρριψη αυτού του
προϊόντος θα συμβάλει στην αποτελεσματική χρήση των φυσικών
πόρων. Για περισσότερες πληροφορίες σχετικά με τα σημεία όπου
μπορείτε να απορρίψετε τον εξοπλισμό σας για ανακύκλωση,
επικοινωνήστε με το τοπικό γραφείο της πόλης σας, την υπηρεσία
απορριμμάτων, το εγκεκριμένο σχήμα ΑΗΗΕ ή την υπηρεσία
απόρριψης οικιακών αποβλήτων. Για περισσότερες πληροφορίες
σχετικά με την επιστροφή και την ανακύκλωση των προϊόντων ΑΗΗΕ,
επισκεφθείτε την τοποθεσία www.canon-europe.com/weee
.
66
Polski
Tylko dla krajów Unii Europejskiej oraz EOG (Norwegia,
Islandia i Liechtenstein)
Ten symbol oznacza, że zgodnie z dyrektywą WEEE dotyczącą
zużytego sprzętu elektrycznego i elektronicznego (2012/19/UE) oraz
przepisami lokalnymi nie należy wyrzucać tego produktu razem z
odpadami gospodarstwa domowego. Produkt należy przekazać do
wyznaczonego punktu gromadzenia odpadów, np. firmie, od której
kupowany jest nowy, podobny produkt lub do autoryzowanego punktu
gromadzenia zużytego sprzętu elektrycznego i elektronicznego w celu
poddania go recyklingowi. Usuwanie tego typu odpadów w
nieodpowiedni sposób może mieć negatywny wpływ na otoczenie i
zdrowie innych osób ze względu na niebezpieczne substancje
stosowane w takim sprzęcie. Jednocześnie pozbycie się zużytego
sprzętu w zalecany sposób przyczynia się do właściwego
wykorzystania zasobów naturalnych. Aby uzyskać więcej informacji
na temat punktów, do których można dostarczyć sprzęt do recyklingu,
prosimy skontaktować się z lokalnym urzędem miasta, zakładem
utylizacji odpadów, skorzystać z instrukcji zatwierdzonej dyrektywą
WEEE lub skontaktować się z przedsiębiorstwem zajmującym się
wywozem odpadów domowych. Więcej informacji o zwracaniu i
recyklingu zużytego sprzętu elektrycznego i elektronicznego znajduje
się w witrynie www.canon-europe.com/weee
.
Magyar
Csak az Európai Unió és az EGT (Norvégia, Izland és
Liechtenstein) országaiban
Ez a szimbólum azt jelzi, hogy a helyi törvények és a WEEE-irányelv
(2012/19/EU) szerint a termék nem kezelhető háztartási hulladékként.
A terméket a kijelölt nyilvános gyűjtőpontokon kell leadni, például
hasonló cserekészülék vásárlásakor, illetve bármelyik, elektromos és
elektronikai berendezésekből származó hulladék (WEEE) átvételére
feljogosított gyűjtőponton. Az ilyen jellegű hulladékok a nem
megfelelő kezelés esetén a bennük található veszélyes anyagok
révén ártalmasak lehetnek a környezetre és az emberek
egészségére. Továbbá, a termékből származó hulladék megfelelő
kezelésével hozzájárulhat a természetes nyersanyagok hatékonyabb
hasznosításához. A berendezésekből származó, újrahasznosítható
hulladékok elhelyezésére vonatkozó további tudnivalókért forduljon a
helyi önkormányzathoz, a közterület-fenntartó vállalathoz, a
háztartási hulladék begyűjtését végző vállalathoz, illetve a hivatalos
WEEE-képviselethez. További tudnivalókat a WEEE-termékek
visszajuttatásáról és újrahasznosításáról a www.canon-europe.com/
weee.
Slovenský
Platí len pre štáty Európskej únie a EHP (Nórsko, Island a
Lichtenštajnsko)
Tento symbol znamená, že podľa Smernice 2012/19/EÚ o odpade z
elektrických a elektronických zariadení (OEEZ) a podľa platnej
legislatívy Slovenskej republiky sa tento produkt nesmie likvidovať
spolu s komunálnym odpadom. Produkt je potrebné odovzdať do
určenej zberne, napr. prostredníctvom výmeny za kúpu nového
podobného produktu, alebo na autorizované zberné miesto, ktoré
spracúva odpad z elektrických a elektronických zariadení (EEZ).
Nesprávna manipulácia s takýmto typom odpadu môže mať negatívny
vplyv na životné prostredie a ľudské zdravie, pretože elektrické a
elektronické zariadenia obsahujú potenciálne nebezpečné látky.
Spoluprácou na správnej likvidácii produktu prispejete k účinnému
využívaniu prírodných zdrojov.
Ďalšie informácie o mieste recyklácie opotrebovaných zariadení
získate od miestneho úradu, úradu životného prostredia, zo
schváleného plánu OEEZ alebo od spoločnosti, ktorá zaisťuje
likvidáciu komunálneho odpadu. Viac informácií nájdete aj na webovej
stránke: www.canon-europe.com/weee
.
български
Само за Европейския съюз и ЕИП (Норвегия,
Исландия и Лихтенщайн)
Този символ показва, че този продукт не трябва да се изхвърля
заедно с битовите отпадъци, съгласно Директивата за ИУЕЕО
(2012/19/ЕC) и Вашето национално законодателство. Този
продукт трябва да бъде предаден в предназначен за целта пункт
за събиране, например на база размяна, когато купувате нов
67
подобен продукт, или в одобрен събирателен пункт за
рециклиране на излязло от употреба електрическо и електронно
оборудване (ИУЕЕО). Неправилното третиране на този тип
отпадъци може да доведе до евентуални отрицателни
последствия за околната среда и човешкото здраве поради
потенциално опасните вещества, които обикновено са свързани
с ЕЕО. В същото време Вашето съдействие за правилното
изхвърляне на този продукт ще допринесе за ефективното
използване на природните ресурси. Повече информация относно
местата, където може да предавате излязло от употреба
оборудване за рециклиране, може да получите от местните
власти, от органа, отговорен за отпадъците и от одобрена
система за излязло от употреба ЕЕО или от Вашата местна
служба за битови отпадъци. За повече информация относно
връщането и рециклирането на продукти от излязло от употреба
ЕЕО посетете www.canon-europe.com/weee
.
Română
Doar pentru Uniunea Europeană şi EEA (Norvegia,
Islanda şi Liechtenstein)
Acest simbol indică faptul că acest produs nu trebuie aruncat o dată
cu reziduurile menajere, în conformitate cu Directiva DEEE (Directiva
privind deşeurile de echipamente electrice şi electronice) (2012/19/
UE) şi legile naţionale. Acest produs trebuie transportat la un punct de
colectare special, de exemplu un centru care preia produsele vechi
atunci când achiziţionaţi un produs nou similar, sau la un punct de
colectare autorizat pentru reciclarea deşeurilor provenite de la
echipamentele electrice şi electronice (EEE). Mânuirea
necorespunzătoare a acestor tipuri de deşeuri poate avea un impact
negativ asupra mediului înconjurător şi sănătăţii indivizilor, din cauza
substanţelor potenţial nocive care sunt în general asociate cu EEE. În
acelaşi timp, cooperarea dvs. la reciclarea corectă a acestui produs va
contribui la utilizarea efectivă a resurselor naturale. Pentru mai multe
informaţii privind locurile de reciclare a deşeurilor provenite de la
echipamente, contactaţi biroul primăriei locale, autoritatea
responsabilă cu colectarea deşeurilor, schema DEEE aprobată sau
serviciul de colectare a deşeurilor menajere. Pentru mai multe
informaţii privind returnarea şi reciclarea produselor DEEE, vizitaţi
www.canon-europe.com/weee
.
Slovenčina
Samo za Evropsko unijo in EGP (Norveška, Islandija in
Lihtenštajn)
Ta simbol pomeni, da tega izdelka v skladu z direktivo OEEO (2012/
19/EU) in državno zakonodajo ne smete odvreči v gospodinjske
odpadke. Ta izdelek morate odložiti na ustrezno zbiralno mesto, na
primer pri pooblaščenem prodajalcu, ko kupite podoben nov izdelek
ali na zbiralno mesto za recikliranje električne in elektronske opreme.
Neprimerno ravnanje s takšnimi odpadki lahko negativno vpliva na
okolje in človekovo zdravje zaradi nevarnih snovi, ki so povezane z
električno in elektronsko opremo. S pravilno odstranitvijo izdelka
hkrati prispevate tudi k učinkoviti porabi naravnih virov. Če želite več
informacij o tem, kje lahko odložite odpadno opremo za recikliranje,
pokličite občinski urad, komunalno podjetje ali službo, ki skrbi za
odstranjevanje odpadkov, ali si oglejte načrt OEEO. Če želite več
informacij o vračanju in recikliranju izdelkov v skladu z direktivo
OEEO, obiščite www.canon-europe.com/weee
.
Hrvatski
Samo za Europsku uniju i EEA (Norveška, Island i
Lihtenštajn)
Ovaj simbol pokazuje da se ovaj proizvod ne smije odlagati s
komunalnim i ostalim otpadom sukladno WEEE Direktivi (2012/19/
EC) i Pravilniku o gospodarenju otpadnim električnim i elektroničkim
uređajima i opremom. Ovaj proizvod je potrebno predati ovlaštenom
skupljaču EE otpada ili prodavatelju koji je dužan preuzeti otpadni
proizvod po sistemu jedan za jedan, ukoliko isti odgovara vrsti te je
obavljao primarne funkcije kao i isporučena EE oprema. Nepropisno
rukovanje ovom vrstom otpada može imati negativan učinak na
okolinu i zdravlje ljudi zbog supstanci koje su potencijalno opasne za
zdravlje, a općenito se povezuju s EEE. Istovremeno, vaša će
suradnja kroz propisno odlaganje ovog proizvoda doprinijeti efektivnoj
uporabi prirodnih resursa. Za više informacija o tome gdje možete
odložiti svoj otpad za recikliranje obratite se vašem lokalnom
gradskom uredu, komunalnoj službi, odobrenom WEEE programu ili
68
službi za odlaganje kućnog otpada. Ostale informacije o vraćanju i
recikliranju WEEE proizvoda potražite na www.canon-europe.com/
weee.
Català
Només per a la Unió Europea i a l’Espai Econòmic
Europeu (Noruega, Islàndia i Liechtenstein)
Aquest símbol indica que aquest producte no s’ha de llençar a les
escombraries de la llar, d’acord amb la Directiva RAEE (2012/19/UE)
i la legislació nacional. Aquest producte s’hauria de lliurar en un dels
punts de recollida designats, com per exemple, intercanviant-lo un per
un en comprar un producte similar o lliurant-lo en un lloc de recollida
autoritzat per al reciclatge de residus d’aparells elèctrics i electrònics
(AEE). La manipulació inadequada d’aquest tipus de residus podria
tenir un impacte negatiu en l’entorn i en la salut humana, a causa de
les substàncies potencialment perilloses que normalment estan
associades als AEE. Així mateix, la vostra cooperació a l’hora de
llençar correctament aquest producte contribuirà a la utilització
efectiva dels recursos naturals. Per a més informació sobre els punts
on podeu lliurar aquest producte per procedir al seu reciclatge,
adreceu-vos a la vostra oficina municipal, a les autoritats
encarregades dels residus, al pla de residus homologat per la RAEE
o al servei de recollida de deixalles domèstiques de la vostra localitat.
Per a més informació sobre la devolució i el reciclatge de productes
RAEE, visiteu www.canon-europe.com/weee
.
Eesti
Üksnes Euroopa Liit ja EMP (Norra, Island ja
Liechtenstein)
See sümbol näitab, et antud toodet ei tohi vastavalt elektri- ja
elektroonikaseadmete jäätmeid käsitlevale direktiivile (2012/19/EL)
ning teie riigis kehtivatele õigusaktidele utiliseerida koos
olmejäätmetega. Antud toode tuleb anda selleks määratud
kogumispunkti, nt müügipunkt, mis on volitatud üks ühe vastu
vahetama, kui ostate uue sarnase toote, või elektri- ja
elektroonikaseadmete jäätmete ümbertöötlemiseks mõeldud
kogumispunkti. Täiendava teabe saamiseks elektri- ja
elektroonikaseadmetest tekkinud jäätmete tagastamise ja
ümbertöötlemise kohta võtke ühendust kohaliku omavalitsusega,
asjakohase valitsusasutusega, asjakohase
tootjavastutusorganisatsiooniga või olmejäätmete käitlejaga.
Lisateavet leitate ka Interneti-leheküljelt www.canon-europe.com/
weee.
Latviešu
Tikai Eiropas Savienībai un EEZ (Norvēģijai, Islandei un
Lihtenšteinai)
Šis simbols norāda, ka atbilstoši ES Direktīvai (2012/19/ES) par
elektrisko un elektronisko iekārtu atkritumiem (EEIA) un vietējiem
tiesību aktiem no šī izstrādājuma nedrīkst atbrīvoties, izmetot to kopā
ar sadzīves atkritumiem. Šis izstrādājums ir jānodod piemērotā
savākšanas vietā, piemēram, apstiprinātā veikalā, kur iegādājaties
līdzīgu jaunu produktu un atstājat veco, vai apstiprinātā vietā izlietotu
elektrisko un elektronisko iekārtu pārstrādei. Nepareiza
šāda veida atkritumu apsaimniekošana var apdraudēt vidi un cilvēka
veselību tādu iespējami bīstamu vielu dēļ, kas parasti ir elektriskajās
un elektroniskajās iekārtās. Turklāt jūsu atbalsts pareizā šāda veida
atkritumu apsaimniekošanā sekmēs efektīvu dabas resursu
izmantošanu. Lai saņemtu pilnīgāku informāciju par vietām, kur
izlietoto iekārtu var nodot pārstrādei, sazinieties ar vietējo pašvaldību,
atkritumu savākšanas atbildīgo dienestu, pilnvarotu EEIA struktūru vai
sadzīves atkritumu apsaimniekošanas iestādi. Lai saņemtu plašāku
informāciju par elektrisko un elektronisko iekārtu nodošanu
pārstrādei, apmeklējiet tīmekļa vietni www.canon-europe.com/weee
.
Lietuvių
Tik Europos Sąjungai ir EEE (Norvegijai, Islandijai ir
Lichtenšteinui)
Šis ženklas reiškia, kad gaminio negalima išmesti su buitinėmis
atliekomis, kaip yra nustatyta Direktyvoje (2012/19/ES) ir
nacionaliniuose teisė aktuose dėl EEĮ atliekų tvarkymo. Šį gaminį
reikia atiduoti į tam skirtą surinkimo punktą, pvz., pagal patvirtintą
keitimo sistemą, kai perkamas panašus gaminys, arba į elektros ir
elektroninės įrangos (EEĮ) atliekų perdirbimo punktą. Netinkamas
69
tokios rūšies atliekų tvarkymas dėl elektros ir elektroninėje įrangoje
esančių pavojingų medžiagų gali pakenkti aplinkai ir žmonių sveikatai.
Padėdami užtikrinti tinkamą šio gaminio šalinimo tvarką, kartu
prisidėsite prie veiksmingo gamtos išteklių naudojimo. Jei reikia
daugiau informacijos, kaip šalinti tokias atliekas, kad jos būtų toliau
perdirbamos, kreipkitės į savo miesto valdžios institucijas, atliekų
tvarkymo organizacijas, patvirtintų EEĮ atliekų sistemų arba jūsų
buitinių atliekų tvarkymo įstaigų atstovus. Išsamesnės informacijos
apie EEĮ atliekų grąžinimo ir perdirbimo tvarką galite rasti apsilankę
tinklalapyje www.canon-europe.com/weee
.
Srpski
Ovaj simbol označava da ovaj proizvod ne sme da se odlaže sa
ostalim kućnim otpadom, u skladu sa WEEE Direktivom (2012/19/EU)
i nacionalnim zakonima. Ovaj proizvod treba predati određenom
centru za prikupljanje, npr. na osnovi "jedan-za-jedan" kada kupujete
sličan novi proizvod, ili ovlašćenom centru za prikupljanje za reciklažu
istrošene električne i elektronske opreme (EEE). Nepravilno
rukovanje ovom vrstom otpada može da ima moguće negativne
posledice po životnu sredinu i ljudsko zdravlje usled potencijalno
opasnih materijala koji se uglavnom vezuju za EEE. U isto vreme,
vaša saradnja na ispravnom odlaganju ovog proizvoda će doprineti
efikasnom korišćenju prirodnih resursa. Za više informacija o tome
gde možete da predate vašu staru opremu radi recikliranje, vas
molimo, da kontaktirate lokalne gradske vlasti, komunalne službe,
odobreni plan reciklaže ili Gradsku čistoću. Za više informacija o
vraćanju i recikliranju WEEE proizvoda, posetite stranicu www.canon-
europe.com/weee.
Српски
Ovaj simbol označava da ovaj proizvod ne sme da se odlaže sa
ostalim kućnim otpadom, u skladu sa WEEE Direktivom (2012/19/EU)
i nacionalnim zakonima. Ovaj proizvod treba predati određenom
centru za prikupljanje, npr. na osnovi "staro za novo" kada kupujete
sličan novi proizvod, ili ovlašćenom centru za reciklažu istrošene
električne i elektronske opreme (EEE). Nepravilno rukovanje ovom
vrstom otpada može da ima moguće negativne uticaje po životnu
sredinu i ljudsko zdravlje usled potencijalno opasnih materijala koje se
uglavnom vezuju za EEE. U isto vreme, vaša saradnja na ispravnom
odlaganju ovog proizvoda će doprineti efikasnom korišćenju prirodnih
resursa. Za više informacija o tome gde možete da predate vašu staru
opremu radi recikliranje, molimo Vas da kontaktirate lokalne gradske
vlasti, komunalne službe, odobreni plan reciklaže ili Gradsku čistoću.
Za više informacija o vraćanju i recikliranju WEEE proizvoda, posetite
stranicu www.canon-europe.com/weee
.
CANON ELECTRONICS INC.
3-5-10 SHIBAKOEN, MINATO-KU, TOKYO 105-0011, JAPAN
CANON U.S.A. INC.
ONE CANON PARK, MELVILLE, NY 11747, U.S.A.
CANON CANADA INC.
8000 MISSISSAUGA ROAD, BRAMPTON, ONTARIO L6Y 5Z7, CANADA
CANON EUROPA N.V.
BOVENKERKERWEG 59, 1185 XB AMSTELVEEN, THE NETHERLANDS
CANON AUSTRALIA PTY. LTD.
BUILDING A, THE PARK ESTATE, 5 TALAVERA ROAD, MACQUARIE PARK, NSW 2113, AUSTRALIA
CANON SINGAPORE PTE. LTD.
1 FUSIONOPOLIS PLACE, #14-10, GALAXIS, SINGAPORE 138522
CANON KOREA INC.
607, TEHERAN-RO, GANGNAM-GU, SEOUL, KOREA
CANON INDIA PVT. LTD
7TH FLOOR, TOWER B DLF CYBER TERRACES DLF PHASE III GURGAON - 122002 HARYANA, INDIA
PUB. 6T3-0125-E1.10 © CANON ELECTRONICS INC. 2020
