ZYPZYP
OPERATION MANUAL
H1-ZYP
HELMETS
SAVE
LIVES!
Always wear a properly fitted helmet that
complies with CPSC or CE safety standards
when you ride.
Correct Fit:
Make sure your helmet
covers your forehead.
Incorrect Fit:
Forehead is exposed
and vulnerable to
serious injury.
PLEASE READ THE OPERATION MANUAL THOROUGHLY.
Failure to follow the basic instructions and safety precautions
listed in the operation manual can lead to damage to your Zyp,
property damage, serious bodily injury, or death.
Thank you for purchasing the Hover-1 Zyp e-scooter. Please read
all instructions carefully before using it and retain this manual for
future reference.
• To avoid collisions, falls, and loss of control, please learn how to
ride the Zyp safely.
• You can learn how to ride the Zyp by reading the operation
manual and watching videos.
• All users are responsible for any consequences caused by
violating warning contents or proper operations. Hover-1 cannot
be held liable.
ATTENTION
1. Only use the supplied charger from Hover-1 with this e-scooter.
2. The operating temperature range of the charger is 32°F
- 104°F
(0°C - 40°C).
3. The operating temperature range of the Zyp is 32°F - 104°F
(0°C - 40°C).
4. Do not ride on icy or slippery surfaces.
5. Read the operation manual and warning labels before riding.
6. Store the Zyp in a dry, ventilated environment.
7. When transporting the Zyp, avoid violent crashes or impact.
8. For your safety and the best riding experience, please check
the tire pressure of this e-scooter before each ride. Low tire
pressure can reduce stability, handling, and battery efficiency,
while excessively high pressure may damage the tire. Refer to the
recommended pressure range on the tire and adjust as needed
to ensure a safe and smooth ride.
• Check with your doctor if you have a medical condition that
could affect your ability to use the Zyp.
• Persons with head, back, neck ailments, or prior surgeries to
those areas of the body are not recommended to use
the Zyp.
• Do not operate if you are pregnant or have a heart condition.
• Persons with any mental or physical conditions that may make
them susceptible to injury or impair their physical or mental
capabilities to recognize, understand, and perform all of the
safety instructions and assume the hazards inherent in operation
should not use the Zyp.
In this manual, the above symbol with the word “WARNING”
indicates a hazardous situation which, if not avoided, can cause
death or serious injury.
Please keep the serial number on file for warranty claims as well as
proof of purchase.
Prolonged exposure to UV rays, rain, and the elements may
damage the enclosure materials. Store indoors when not in use.
WARNING - Risk of fire - No user serviceable parts
LOW TEMPERATURE WARNING
Low temperatures will affect the lubrication of moving parts inside
the Zyp, increasing internal resistance. Additionally, the discharge
capacity and capacity of the battery will be significantly
decreased.
Use caution when riding the Zyp in cold temperatures (below
40°F/4°C). Doing so may increase the risk of mechanical failures of
the e-scooter, which may lead to damage to your device,
property damage, serious bodily injury, and even death.
SAFETY INSTRUCTIONS
• Keep the e-scooter away from heat sources, direct sunlight,
humidity, water, and any other liquids.
• Do not operate the e-scooter if it has been exposed to water,
moisture, or any other liquids to prevent electric shock, explosion,
and/or injury to yourself and damage to the e-scooter.
• Do not use the e-scooter if it has been dropped or damaged in
any way.
• Repairs to electrical equipment should only be performed by
the manufacturer. Improper repairs void the warranty and may
place the user at serious risk.
• Do not puncture or harm the exterior surface of the e-scooter in
any way.
• Keep the device free from dust, lint, etc.
• Do not use this e-scooter for anything other than its intended use
or purpose. Doing so may damage the e-scooter or lead to
property damage, injury, or death.
• Do not expose the batteries to excessive heat such as direct
sunlight or an open flame.
• Do not allow hands, feet, hair, body parts, clothing, or similar
articles to come in contact with moving parts, wheels, or the
drivetrain while the Zyp is running.
• Do not operate or allow others to operate the Zyp until the user
understands all instructions, warnings, and safety features described
in this manual.
WARNING!
1
PLEASE READ THE OPERATION MANUAL THOROUGHLY.
Failure to follow the basic instructions and safety precautions
listed in the operation manual can lead to damage to your Zyp,
property damage, serious bodily injury, or death.
Thank you for purchasing the Hover-1 Zyp e-scooter. Please read
all instructions carefully before using it and retain this manual for
future reference.
• To avoid collisions, falls, and loss of control, please learn how to
ride the Zyp safely.
• You can learn how to ride the Zyp by reading the operation
manual and watching videos.
• All users are responsible for any consequences caused by
violating warning contents or proper operations. Hover-1 cannot
be held liable.
ATTENTION
1. Only use the supplied charger from Hover-1 with this e-scooter.
2. The operating temperature range of the charger is 32°F
- 104°F
(0°C - 40°C).
3. The operating temperature range of the Zyp is 32°F - 104°F
(0°C - 40°C).
4. Do not ride on icy or slippery surfaces.
5. Read the operation manual and warning labels before riding.
6. Store the Zyp in a dry, ventilated environment.
7. When transporting the Zyp, avoid violent crashes or impact.
8. For your safety and the best riding experience, please check
the tire pressure of this e-scooter before each ride. Low tire
pressure can reduce stability, handling, and battery efficiency,
while excessively high pressure may damage the tire. Refer to the
recommended pressure range on the tire and adjust as needed
to ensure a safe and smooth ride.
• Check with your doctor if you have a medical condition that
could affect your ability to use the Zyp.
• Persons with head, back, neck ailments, or prior surgeries to
those areas of the body are not recommended to use
the Zyp.
• Do not operate if you are pregnant or have a heart condition.
• Persons with any mental or physical conditions that may make
them susceptible to injury or impair their physical or mental
capabilities to recognize, understand, and perform all of the
safety instructions and assume the hazards inherent in operation
should not use the Zyp.
In this manual, the above symbol with the word “WARNING”
indicates a hazardous situation which, if not avoided, can cause
death or serious injury.
Please keep the serial number on file for warranty claims as well as
proof of purchase.
Prolonged exposure to UV rays, rain, and the elements may
damage the enclosure materials. Store indoors when not in use.
WARNING - Risk of fire - No user serviceable parts
LOW TEMPERATURE WARNING
Low temperatures will affect the lubrication of moving parts inside
the Zyp, increasing internal resistance. Additionally, the discharge
capacity and capacity of the battery will be significantly
decreased.
Use caution when riding the Zyp in cold temperatures (below
40°F/4°C). Doing so may increase the risk of mechanical failures of
the e-scooter, which may lead to damage to your device,
property damage, serious bodily injury, and even death.
SAFETY INSTRUCTIONS
• Keep the e-scooter away from heat sources, direct sunlight,
humidity, water, and any other liquids.
• Do not operate the e-scooter if it has been exposed to water,
moisture, or any other liquids to prevent electric shock, explosion,
and/or injury to yourself and damage to the e-scooter.
• Do not use the e-scooter if it has been dropped or damaged in
any way.
• Repairs to electrical equipment should only be performed by
the manufacturer. Improper repairs void the warranty and may
place the user at serious risk.
• Do not puncture or harm the exterior surface of the e-scooter in
any way.
• Keep the device free from dust, lint, etc.
• Do not use this e-scooter for anything other than its intended use
or purpose. Doing so may damage the e-scooter or lead to
property damage, injury, or death.
• Do not expose the batteries to excessive heat such as direct
sunlight or an open flame.
• Do not allow hands, feet, hair, body parts, clothing, or similar
articles to come in contact with moving parts, wheels, or the
drivetrain while the Zyp is running.
• Do not operate or allow others to operate the Zyp until the user
understands all instructions, warnings, and safety features described
in this manual.
2
PLEASE READ THE OPERATION MANUAL THOROUGHLY.
Failure to follow the basic instructions and safety precautions
listed in the operation manual can lead to damage to your Zyp,
property damage, serious bodily injury, or death.
Thank you for purchasing the Hover-1 Zyp e-scooter. Please read
all instructions carefully before using it and retain this manual for
future reference.
• To avoid collisions, falls, and loss of control, please learn how to
ride the Zyp safely.
• You can learn how to ride the Zyp by reading the operation
manual and watching videos.
• All users are responsible for any consequences caused by
violating warning contents or proper operations. Hover-1 cannot
be held liable.
ATTENTION
1. Only use the supplied charger from Hover-1 with this e-scooter.
2. The operating temperature range of the charger is 32°F
- 104°F
(0°C - 40°C).
3. The operating temperature range of the Zyp is 32°F - 104°F
(0°C - 40°C).
4. Do not ride on icy or slippery surfaces.
5. Read the operation manual and warning labels before riding.
6. Store the Zyp in a dry, ventilated environment.
7. When transporting the Zyp, avoid violent crashes or impact.
8. For your safety and the best riding experience, please check
the tire pressure of this e-scooter before each ride. Low tire
pressure can reduce stability, handling, and battery efficiency,
while excessively high pressure may damage the tire. Refer to the
recommended pressure range on the tire and adjust as needed
to ensure a safe and smooth ride.
• Check with your doctor if you have a medical condition that
could affect your ability to use the Zyp.
• Persons with head, back, neck ailments, or prior surgeries to
those areas of the body are not recommended to use
the Zyp.
• Do not operate if you are pregnant or have a heart condition.
• Persons with any mental or physical conditions that may make
them susceptible to injury or impair their physical or mental
capabilities to recognize, understand, and perform all of the
safety instructions and assume the hazards inherent in operation
should not use the Zyp.
In this manual, the above symbol with the word “WARNING”
indicates a hazardous situation which, if not avoided, can cause
death or serious injury.
Please keep the serial number on file for warranty claims as well as
proof of purchase.
Prolonged exposure to UV rays, rain, and the elements may
damage the enclosure materials. Store indoors when not in use.
WARNING - Risk of fire - No user serviceable parts
LOW TEMPERATURE WARNING
Low temperatures will affect the lubrication of moving parts inside
the Zyp, increasing internal resistance. Additionally, the discharge
capacity and capacity of the battery will be significantly
decreased.
Use caution when riding the Zyp in cold temperatures (below
40°F/4°C). Doing so may increase the risk of mechanical failures of
the e-scooter, which may lead to damage to your device,
property damage, serious bodily injury, and even death.
SAFETY INSTRUCTIONS
• Keep the e-scooter away from heat sources, direct sunlight,
humidity, water, and any other liquids.
• Do not operate the e-scooter if it has been exposed to water,
moisture, or any other liquids to prevent electric shock, explosion,
and/or injury to yourself and damage to the e-scooter.
• Do not use the e-scooter if it has been dropped or damaged in
any way.
• Repairs to electrical equipment should only be performed by
the manufacturer. Improper repairs void the warranty and may
place the user at serious risk.
• Do not puncture or harm the exterior surface of the e-scooter in
any way.
• Keep the device free from dust, lint, etc.
• Do not use this e-scooter for anything other than its intended use
or purpose. Doing so may damage the e-scooter or lead to
property damage, injury, or death.
• Do not expose the batteries to excessive heat such as direct
sunlight or an open flame.
• Do not allow hands, feet, hair, body parts, clothing, or similar
articles to come in contact with moving parts, wheels, or the
drivetrain while the Zyp is running.
• Do not operate or allow others to operate the Zyp until the user
understands all instructions, warnings, and safety features described
in this manual.
WARNING!
WARNING!
SERIAL NUMBER
3
Each Zyp e-scooter is rigorously tested for safety. Operating the
Zyp without following the contents of this manual may lead to
damage to your Zyp or bodily injury.
PACKAGE CONTENTS
• Hover-1 Zyp E-Scooter
• Charger + Charging Cable
• Operation Manual
INTRODUCTION
SPECIFICATIONS
Model:
Net Weight:
Weight Capacity:
Max Speed:
Max Distance Range:
Motor:
Brakes:
Max Incline Angle:
Charger Manufacturer:
Charger Model:
Charging Time:
Battery Type:
Battery Voltage:
Battery Capacity:
Power Requirement:
Display:
Suspension:
Tire Size:
Tire Type:
Suggested Tire Pressure Range:
Tire Pressure:
Dimensions (unfolded):
Dimensions (folded):
UL Certification:
H1-ZYP
46 lbs (20.86 kg)
264 lbs (120 kg)
Up to 20 mph (32 km/h)
Up to 20 miles (32 km)
450W
Front & rear disc brakes
7°
GUANGZHOU JIYIN POWER
ELECTRONICS CO., LTD.
JY-420150
Up to 7 hours
Lithium-ion
36V
9.6Ah
AC 100V-240V, 50 Hz/60 Hz
LCD display
Rear shock suspension
16 inches (40.6 cm)
Air-filled tires
35 psi-45 psi
40 psi
50.1” x 21.6” x 41.5”
(127.2 x 55 x 105.4 cm)
50.1” x 13” x 30”
(127.2 x 33 x 76.2 cm)
UL2272
4
HOVER-1 ZYP DIAGRAM
5
1
2
3
4
7
9
10
11
11
13
14
15
17
20
16
19
18
12
8
6
FEATURES/PARTS
1. Seat
2. Seat Post
3. Seat Post Clamp
4. Front Fender
5. Folding Hinge
6. Footrests
7. Motor
8. Rear Disc Brake
9. Front Fork
10. Front Disc Brake
11. Tire (35-45 psi)
12. Headlight
13. Handlebar
14. Handlebar Bracket
15. Bracket Clamp
16. Steering Column
17. Brake Lever
18. Taillight
19. Rear Shock Suspension
20. On/Off Starter
5
PARTS LIST
6
A
E
F
G
B
C
D
A. Zyp E-Scooter
B. Seat
C. Footrests (2)
D. Keys (2)
E. Hex Keys (2)
F. Phillips-Head Screwdriver
G. Charger
HOVER-1 ZYP INTERFACE
LCD DISPLAY
CONTROLLER
BATTERY INDICATOR
Displays your current battery level
THROTTLE LEVEL
Press the ‘M’ button to increase
or decrease throttle level
P (Parking Mode*) - 0% Throttle Power
1 - 30% Throttle Power (10 mph)
2 - 60% Throttle Power (15 mph)
3 - 100% Throttle Power (20 mph)
*Squeeze the brake once to deactivate parking mode
SPEEDOMETER
Displays your current speed in MPH
TRIP/ODOMETER/VOLTAGE
Displays your distance traveled or
your battery voltage
7
M
Brake
Brake
Power
Bell
Display
Panel
Throttle
HEADLIGHT/TAILLIGHT
& TRIP/ODOMETER/VOLTAGE
THROTTLE LEVEL
ASSEMBLING ZYP
Remove all contents from the box. Remove the protective packaging
material from the Zyp. Check the box to make sure no parts are left inside
before discarding. Stand the Zyp up and engage the kickstand.
INSTALL THE STEERING COLUMN
1. Lift the handlebars up. Open the folding hinge by pushing the folding
hinge release lever up and pulling the folding hinge away from Zyp. Insert
the steering column into the hole above the front wheel.
2. With the folding hinge open, angle the steering column toward the side
of the Zyp. Tighten the screw at the bottom of the steering column with
the hex key. Straighten the steering column, then close the folding hinge
tightly.
ADJUST THE HANDLEBARS
1. Open the handlebar clamp located in the center of the handlebar.
Grab the handlebar and twist it until the brake levers are facing forward.
Make sure the handlebars are centered along the grooves. Close the
handlebar clamp tightly.
INSTALL THE SEAT
1. Open the seat post clamp and insert the seat post into the Zyp. Make
sure that the minimum insertion mark (indicated on the post) is completely
inserted into the frame and not visible.
2. Raise or lower the seat post to the desired height and clamp the seat
post securely. Make sure the clamp closes tightly, but not so tight that it is
extremely difficult to open and close. Twist the clamp clockwise/
counterclockwise to tighten/loosen it.
8
INSTALL THE FOOTRESTS
1. Thread each footrest onto the pegs at the sides of the Zyp.
2. Start twisting each footrest clockwise by hand to tigthen. Twist each
footrest until they are sufficiently threaded onto the pegs and mostly
tightened.
3. Insert a screwdriver into the middle of each footrest and spin each
footrest clockwise until they are fully tightened.
FOLDING & UNFOLDING ZYP
FOLDING ZYP
1. Push the folding hinge release lever up and pull the folding hinge
away from Zyp.
2. Push the steering column down to the right side of Zyp.
UNFOLDING ZYP
1. Raise the steering column until it is pointing straight up.
2. Push the folding hinge toward the steering column until it clicks into
place. Make sure the steering column and folding hinge are secured
before riding.
9
TURNING YOUR ZYP ON/OFF
To power the Zyp on, insert the key into the starter and turn it clockwise.
Turn the key counterclockwise to power it off.
ACCELERATE/BRAKE
To accelerate, twist the throttle on the right handlebar. To brake, release
the throttle and squeeze the brake levers.
TURN HEADLIGHT ON/OFF
While the Zyp is powered on, press and hold the light button on the
controller to turn the headlight on or off.
CHANGE THROTTLE LEVELS
Press the ‘M’ button on the controller to increase/decrease the throttle
levels.
CHANGE TRIP/ODOMETER/VOLTAGE
Quick press the light button on the controller to cycle between trip,
odometer, and voltage readings.
INFLATING THE TIRES
Your Zyp e-scooter comes equipped with 16 inch air-filled tires. It is
important you keep the tire pressure at the recommended psi levels
(35 psi-45 psi).
For your safety and the best riding experience, check the tire
pressure before each ride. Low tire pressure can reduce stability,
handling, and battery efficiency, while excessively high pressure
may damage the tire. If air is needed, attach an air pump to the
stem on each tire. Inflate the tires until they reach 35-45 psi. Do not
exceed 45 psi.
CONTROLS
BEFORE RIDING
Practice using the Zyp at slower speeds in a flat, open area until you
are comfortable riding it.
PRE-RIDE CHECKLIST
• Ensure that your Zyp is in proper working order each time you ride.
• If a part of the e-scooter does not function correctly, please contact our
Customer Support Center.
10
WARNING
Any Zyp that does not work properly can cause you to lose
control and crash. Do not ride a Zyp with a part that is
damaged. Replace the damaged part before riding.
• Ensure the battery is fully charged before riding your e-scooter.
• Wear all appropriate safety gear before operating your Zyp.
• Wear comfortable clothes and flat, closed-toe shoes when
operating your device.
• Ensure the area that the unit is to be operated in is safe and suitable
for safe operation.
• Ensure the braking system is functioning properly.
• Ensure all safety labels are in place and understood by the operator.
• Ensure any and all axle guards, chain guards, or other covers or
guards supplied by Hover-1 are in place and in serviceable condition.
• Ensure the tires are in good condition, inflated properly, and have
sufficient tread remaining.
• Improper attachment of the handlebar may result in damage to the
steering column and result in loss of control, serious injury, or death.
Ensure the handlebars are secured.
11
Different localities and countries have different laws governing riding
on public roads, and you should check with local officials to ensure
you are complying with these laws. Hover-1 is not liable for tickets or
violations given to riders who do not follow local laws and
regulations.
• For your safety, always wear a helmet that meets CPSC or CE
safety standards. In the event of an accident, a helmet can protect
you from serious injury and in some cases, even death.
• Obey all local traffic laws. Obey red and green lights, one-way
streets, stop signs, pedestrian crosswalks, etc.
• Ride with traffic, not against it.
• Ride defensively. Expect the unexpected.
• Give pedestrians the right-of-way.
• Do not ride too close to pedestrians. Alert them if you intend to
pass them from behind.
• Slow down at all street intersections and look to the left and right
before crossing.
SAFETY PRECAUTIONS
WARNING
When you ride in low-visibility conditions such as fog, dusk, or at night,
you might be difficult to see, which could lead to a collision. Wear
bright, reflective clothing when riding in low-visibility conditions.
WARNING
To reduce the risk of injury, adult supervision is
required. Never use near swimming pools or other
bodies of water. Always wear shoes, and never
allow more than one rider.
12
• Do not ride above your skill level. Ensure you have had enough
practice with all functions and features of your Zyp.
• Before riding your Zyp, make sure it is placed flat on level ground.
• Do not try to open or modify your Zyp. Doing so voids the
manufacturer warranty and may cause your Zyp to fail, resulting in
injury or death.
• Do not use the Zyp in a manner that would put people or property
in danger.
• If you are riding near other riders, be sure to maintain a safe
distance between each other to prevent collisions.
• Be sure to keep your feet on the Zyp’s footrests while riding. Moving
your feet off the footrests while riding is dangerous and could cause
the Zyp to veer sideways.
• Do not operate the Zyp while under the influence of drugs or
alcohol.
• Do not operate the Zyp when you are restless or sleepy.
• Use your best judgment to keep yourself out of dangerous situations
with your Zyp.
• Do not ride your Zyp off of curbs, ramps, or attempt to operate it in
a skate park or empty pool. Misuse of your Zyp voids the
manufacturer warranty and may lead to injury or damage.
• Do not abuse your Zyp. Doing so can damage your unit and cause
failure to the operating system, which may lead to injury. Physical
abuse, including dropping your Zyp, voids the manufacturer
warranty.
• Do not operate in or near puddles of water, mud, sand, stones,
gravel, debris, or near rough and rugged terrain.
• The Zyp can be used on paved surfaces that are flat and even. If
you encounter uneven pavement, move your Zyp around and past
the obstruction.
• Do not ride in inclement weather: snow, rain, hail, sleet, on icy roads,
or in extreme heat or cold.
• If you are unsure if you can safely ride on a specific terrain, get off
13
and move your Zyp. Always be on the side of caution,
• Do not attempt to ride over bumps or objects greater than ½ in.
• Pay attenton. Look at where you are driving and be conscious of the
road conditions, people, property, and other objects around you.
• Operate your Zyp with extreme caution when indoors, especially
around people, property, and narrow spaces.
• Do not operate the Zyp while talking, texting, or looking at your
phone.
• Do not ride your Zyp where it is not permitted.
• Do not ride your Zyp near motor vehicles or on public roads.
• Do not travel up or down steep hills.
• The Zyp is intended for use by a single individual. DO NOT attempt to
operate the Zyp with two or more people.
• Do not carry anything while riding the Zyp.
• The Zyp is recommended for riders aged 14 and older.
• At higher speeds, always take longer stopping distances into
consideration.
• Do not attempt any stunts or tricks with your Zyp.
• Do not ride the Zyp in dark or poorly lit areas.
• Do not ride the Zyp off road, near or over potholes, cracks, or uneven
pavement or surfaces.
• Do not turn sharply, especially at high speeds.
• Do not step on the fenders of the Zyp.
• Avoid driving the Zyp in unsafe places, including near areas with
flammable gas, steam, liquid, dust, or fiber that could cause fire and
explosion accidents.
• Before riding, ensure that tires are in good condition and have
sufficient tread remaining.
• Do not operate near swimming pools or other bodies of water.
• Due to fire risks, do not attempt to service any parts on your own.
14
WARNING
Do not turn sharply or at high speeds. Do
not turn or ride quickly along slopes, as it
may cause injury.
FAILURE TO FOLLOW ANY OF THE FOLLOWING SAFETY PRECAUTIONS
CAN LEAD TO DAMAGE TO YOUR ZYP, VOID YOUR MANUFACTURER
WARRANTY, LEAD TO PROPERTY DAMAGE,
AND CAN CAUSE SERIOUS BODILY INJURY OR DEATH.
OPERATING YOUR DEVICE
Make sure the Zyp is fully charged before your first use.
Make sure the tires are inflated to 35-45 psi.
When you are ready to ride, turn on the Zyp by inserting the key into
the starter and turning the key clockwise.
Zyp will start in Parking Mode. As a safety measure, Parking Mode
prevents the throttle from activating the motor. To start riding,
squeeze the brake once to deactive Parking mode, then engage
the throttle gently. Start slow, and gradually speed up as you get
more comfortable riding. If Zyp is idled for 80 seconds, Parking Mode
will be reactivated.
To slow down, release the throttle and squeeze the brake levers. The
brakes are pressure-sensitive, so a tighter grip provides more stopping
power. When you brake, use the rear brake lever, then the front
brake lever, or squeeze both brake levers together.
The faster you are riding, the longer stopping distance you will need
to come to a complete stop. Be cautious, stopping too fast from a
high speed can cause your e-scooter to skid out of control.
Prepare to brace yourself if you encounter bumps or uneven
surfaces. Slow down and ride cautiously. Get off and move your Zyp
to a safe operating space if needed.
When you are ready to stop riding, bring your Zyp to a full stop and
turn the key clockwise to power it off.
RIDING YOUR ZYP
15
WARNING
Riding the Zyp while exceeding the
weight limit may increase the possibility
of injury or product damage.
CHARGING YOUR ZYP
• To preserve battery life and the performance of your Zyp, it is
recommended that you charge it after each ride. If you store the
Zyp for an extended period of time without use, be sure to keep it in
a cool, dry environment. Ocasionally charge the battery to prevent
the battery from losing its ability to hold a charge.
• Ensure that the charging port is clean and dry. Charge the battery
in a cool, dry environment.
• Make sure that there is no dust, debris, or dirt inside the port.
• Plug the charger into a grounded wall outlet.
• Connect the charging cable to the power supply (100V-240V; 50
Hz/60 Hz).
• Align and connect the charging cable into the charging port of
the Zyp (DO NOT FORCE OR BEND THE CHARGING CABLE AS IT
MAY CAUSE THE PRONGS TO BEND OR BREAK).
• When you connect the charger, the indicator light on the charger
should change to red, indicating that your e-scooter is now being
charged.
• When the red indicator light on your charger changes to green,
your e-scooter is fully charged.
• After fully charging your e-scooter, unplug the charger from your
device and from the wall outlet. A full charge may take up to 7
hours. Do not charge the Zyp longer than 7.5 hours, even if the light
does not change to green.
• If the e-scooter is not used for an extended period of time, you may
need to recharge the battery every 2 months to maintain the battery
life.
16
BATTERY SPECIFICATIONS
Battery Type: Rechargeable lithium-ion battery
Charge Time: Up to 7 hours
Voltage: 36V
Initial Capacity: 9.6Ah
Working Temperature: 32°F - 104°F
Charging Temperature: 32°F - 104°F
Storage Time: 1 year
Storage Temperature: 32°F - 104°F
Storage Humidity: 5% - 95%
BATTERY MAINTENANCE
• When charging the e-scooter, only use the enclosed charging
cable provided by Hover-1. Use of any other charger or cable may
lead to damage to the e-scooter, overheating, and risk of fire. Use of
any other charger or cable voids the manufacturer warranty.
• Do not connect or attach the e-scooter or the battery to a power
supply plug or directly to a car’s cigarette lighter.
• Do not place the e-scooter near a fire or leave it out in direct sunlight.
Heating the e-scooter can break or ignite the battery inside the device.
• Do not continue charging the battery if it does not recharge within
the specified charging time. Doing so may cause the battery to
become hot, rupture, or ignite.
• To preserve natural resources, please recycle or dispose of batteries
properly. This product contains lithium-ion batteries. Local, state, or
federal laws may prohibit disposal of lithium-ion batteries in ordinary
trash. Consult your local waste authority for information regarding
available recycling and/or disposal options.
• Do not attempt to modify, change, or replace your battery.
• Do not use your Zyp if the battery begins to emit odor, leaks,
overheats, makes strange noises, or changes in shape or color.
• Do not touch any leaking materials or breathe fumes emitted.
• Do not allow children or animals to touch the battery.
• The battery contains dangerous substances. Do not open the
battery or insert anything into the battery.
• Only use the charger provided by Hover-1.
• Do not attempt to charge the device if the battery has discharged
or emits any substances. In that case, immediately distance yourself
from the battery in case of fire or explosion.
BATTERY CARE / MAINTENANCE
17
BATTERY SPECIFICATIONS
Battery Type: Rechargeable lithium-ion battery
Charge Time: Up to 7 hours
Voltage: 36V
Initial Capacity: 9.6Ah
Working Temperature: 32°F - 104°F
Charging Temperature: 32°F - 104°F
Storage Time: 1 year
Storage Temperature: 32°F - 104°F
Storage Humidity: 5% - 95%
BATTERY MAINTENANCE
• When charging the e-scooter, only use the enclosed charging
cable provided by Hover-1. Use of any other charger or cable may
lead to damage to the e-scooter, overheating, and risk of fire. Use of
any other charger or cable voids the manufacturer warranty.
• Do not connect or attach the e-scooter or the battery to a power
supply plug or directly to a car’s cigarette lighter.
• Do not place the e-scooter near a fire or leave it out in direct sunlight.
Heating the e-scooter can break or ignite the battery inside the device.
• Do not continue charging the battery if it does not recharge within
the specified charging time. Doing so may cause the battery to
become hot, rupture, or ignite.
• To preserve natural resources, please recycle or dispose of batteries
properly. This product contains lithium-ion batteries. Local, state, or
federal laws may prohibit disposal of lithium-ion batteries in ordinary
trash. Consult your local waste authority for information regarding
available recycling and/or disposal options.
• Do not attempt to modify, change, or replace your battery.
• Do not use your Zyp if the battery begins to emit odor, leaks,
overheats, makes strange noises, or changes in shape or color.
• Do not touch any leaking materials or breathe fumes emitted.
• Do not allow children or animals to touch the battery.
• The battery contains dangerous substances. Do not open the
battery or insert anything into the battery.
• Only use the charger provided by Hover-1.
• Do not attempt to charge the device if the battery has discharged
or emits any substances. In that case, immediately distance yourself
from the battery in case of fire or explosion.
WARNING
Failure to follow the safety
precautions listed below could lead
to serious bodily injury or death.
WARNING
SEEK IMMEDIATE MEDICAL ASSISTANCE IF
YOU ARE EXPOSED TO ANY SUBSTANCE
THAT IS EMITTED FROM THE BATTERY.
18
• To avoid damage to the Zyp’s internal circuitry, do not expose it to
liquid, moisture, or humidity.
• Do not use abrasive cleaning solvents to clean the Zyp.
• Do not expose the Zyp to extremely high or low temperatures, as
this will shorten the life of the device, destroy the battery, and/or
distort certain plastic parts.
• Do not dispose of the Zyp in fire as it may explode or combust.
• Do not let the Zyp come into contact with sharp objects, as this will
cause scratches and damage.
• Do not let the Zyp fall from high places, as doing so may damage
the internal circuitry.
• Do not attempt to disassemble the Zyp.
• Only use the charger provided by Hover-1.
CARE & MAINTENANCE
WARNING
Avoid using water or other liquids for
cleaning. If water or other liquids enter the
Zyp, it will cause permanent damage to
the internal components.
WARNING
Users who disassemble the Zyp
e-scooter without permission from
Hover-1 will void the warranty.
19
• To avoid damage to the Zyp’s internal circuitry, do not expose it to
liquid, moisture, or humidity.
• Do not use abrasive cleaning solvents to clean the Zyp.
• Do not expose the Zyp to extremely high or low temperatures, as
this will shorten the life of the device, destroy the battery, and/or
distort certain plastic parts.
• Do not dispose of the Zyp in fire as it may explode or combust.
• Do not let the Zyp come into contact with sharp objects, as this will
cause scratches and damage.
• Do not let the Zyp fall from high places, as doing so may damage
the internal circuitry.
• Do not attempt to disassemble the Zyp.
• Only use the charger provided by Hover-1.
20
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received, including
interference that may cause undesired operation
FCC STATEMENT
• To avoid damage to the Zyp’s internal circuitry, do not expose it to
liquid, moisture, or humidity.
• Do not use abrasive cleaning solvents to clean the Zyp.
• Do not expose the Zyp to extremely high or low temperatures, as
this will shorten the life of the device, destroy the battery, and/or
distort certain plastic parts.
• Do not dispose of the Zyp in fire as it may explode or combust.
• Do not let the Zyp come into contact with sharp objects, as this will
cause scratches and damage.
• Do not let the Zyp fall from high places, as doing so may damage
the internal circuitry.
• Do not attempt to disassemble the Zyp.
• Only use the charger provided by Hover-1.
WARRANTY
Affix Serial Number Label Here:
For warranty information, please visit us at www.hover-1.com.
Manufacturer: DGL Group, Ltd.
2045 Lincoln Highway, Edison, NJ 08817
UL2272 Compliant
Tested and certified to UL2272 Safety Standard by SGS CSTC
Standards Technical Services Co., Ltd. Shenzhen Branch
The purchaser and rider of this product are responsible for knowing
obeying all state and local regulations regarding the use of this
product. It is highly encouraged that you read and follow the product
instructions including all safety precautions and use protective gear.
NYC consumers, please review fire safety info available here:
https://www.nyc.gov/site/fdny/codes/reference/lithium-ion-battery-
safety.page
21
CHARGER TYPE: ES6
@RideHover1
@RideHover1
@RideHover1
@Hover1Rideables
www.Hover-1.com
