GN1416221ZX - MN1416224PX - MN1416224DPX
MN1436224PS-MN1436224DPS
Refrigerator
User manual
EN /
57 8059 0000/AT
Please read these instructions first before using your appliance
Thank you for choosing a Beko appliance.
Please take some time to read this user manual before using your appliance, to ensure you know how to
safely operate the controls and functions.
Carefully follow all unpacking and installation instructions to ensure the appliance is correctly connected
and fitted prior to use.
Please write your product model and serial number on the last page of this user manual, and store in a
safe location close to the appliance for easy future reference.
This user manual may also be applicable for several other models. Differences between models will be
listed.
If you have any questions or concerns, please call our contact centre or find help and information online
at www.beko.co.uk
Symbols and their descriptions
This instruction manual contains the following symbols:
C Important information or useful usage tips.
A Warning against dangerous conditions for life and property.
B Warning against electric voltage.
A
A
A
C
SUPPLIER’S NAME
MODEL IDENTIFIER
(*)
INFORMATION
C
.The model information as stored in the product data base
can be reached by entering following website and searching
for your model identifier (*) found on energy label.
https://eprel.ec.europa.eu/
2 / 36 EN
Refrigerator / User Manual
1- Safety Instructions 3
A 1.1 Intended Use . . . . . . . . . . . . . . . . . . . .3
A 1.2 - Safety for children, vulnerable persons
and pets . . . . . . . . . . . . . . . . . . . . . . . . . .3
A 1.3 - Electrical safety . . . . . . . . . . . . . . . . .4
A 1.4 - Transportation safety . . . . . . . . . . . . .4
A 1.5 - Installation safety. . . . . . . . . . . . . . . .4
A 1.6- Operational safety. . . . . . . . . . . . . . . .5
A 1.7- Maintenance and cleaning safety . . . .6
A 1.8- HomeWhiz . . . . . . . . . . . . . . . . . . . . .6
A 1.9- Lighting . . . . . . . . . . . . . . . . . . . . . . .6
2 Your Refrigerator 7
3 Installation 8
3.1 Appropriate location for installation . . . . . . . .8
3.2 Installing the plastic wedges . . . . . . . . . . . . .8
3.3* Adjusting the feet . . . . . . . . . . . . . . . . . . . .9
3.4 Electric connection . . . . . . . . . . . . . . . . . . . .9
3.5 Adjusting the gap between the upper door. .10
4 Preparation 11
4.1 Things to be done for saving energy . . . . .11
4.2 Recommendations about the fresh food
compartment. . . . . . . . . . . . . . . . . . . . . .11
4.3 Initial use. . . . . . . . . . . . . . . . . . . . . . . . .12
5 Operating the product 13
5.1 Indicator panel . . . . . . . . . . . . . . . . . . . . . .13
5.2 Indicator panel. . . . . . . . . . . . . . . . . . . . .18
5.3 Freezing fresh food. . . . . . . . . . . . . . . . . . .20
5.4 Recommendations for preserving the frozen
food . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
5.5 Deep-freeze information . . . . . . . . . . . . . . .21
5.6 Placing the food . . . . . . . . . . . . . . . . . . . . .21
5.7 Door open warning . . . . . . . . . . . . . . . . . . .22
5.8 Crisper. . . . . . . . . . . . . . . . . . . . . . . . . . . .22
5.9 Humidity-controlled crisper . . . . . . . . . . . . .22
5.10 Egg tray . . . . . . . . . . . . . . . . . . . . . . . . . .22
5.11 Movable Middle Section . . . . . . . . . . . . . .22
5.12 Cool Control Storage Compartment . . . . .23
5.13 Blue light/HarvestFresh. . . . . . . . . . . . . . .23
5.14 Odour filter. . . . . . . . . . . . . . . . . . . . . . . .23
5.15 Use of internal water dispenser and water
dispenser at the door . . . . . . . . . . . . . . . .24
5.16 Dispensing water . . . . . . . . . . . . . . . . . . .24
5.17 For using water dispenser. . . . . . . . . . . . .25
5.18 Icematic . . . . . . . . . . . . . . . . . . . . . . . . .25
5.19 Icematic and ice storage container . . . . . .26
5.20 The dairy (cold storage) compartment . . . .26
6 Maintenance and Cleaning 27
7. Troubleshooting 28
3 / 36 EN
Refrigerator / User Manual
• This section contains safety instructions that
will help get protected against risks of personal
injury or property damage.
• Our company shall not be responsible
for damages that may arise when these
instructions are not followed.
A Installation and repair procedures
must always be performed by the manufacturer,
authorised service agent or a qualified person
specified by the importer.
A Only use original parts and
accessories.
A Original spare parts will be provided
for 10 years, following the product purchasing
date.
A Do not repair or replace any part of
the product unless specified expressly in the user
manual.
A Do not make any technical
modifications to the product.
A 1.1 Intended Use
• This product is not suitable for commercial use
and it must not be used out of its intended use.
This product is designed to be used in houses and
indoor places.
For example:
- Personnel kitchens in stores, offices and
other working environments,
- Farm houses,
- Areas used by customers at hotels, motels
and other types of accommodation,
- Bed&breakfast type hotels, boardinghouses,
- Catering and similar non-retail applications.
This product should not be used outdoors with or
without a tent above it such as boats, balconies or
terraces. Do not expose the product to rain, snow,
sun or wind.
There is the risk of fire!
A 1.2 - Safety for children,
vulnerable persons and pets
• This product can be used by children at and
above 8 years old and by persons with limited
physical, sensory or mental capabilities or who
lack experience and knowledge provided that
they are supervised or trained on the safe use
of the product and the risks it brings out.
• Children aged from 3 to 8 years are allowed to
load and unload refrigerating products.
• Electrical products are dangerous for children
and pets. Children and pets must not play with,
climb or enter the product.
• Cleaning and user maintenance should not
be performed by children unless they are
supervised by someone.
• Keep packaging materials away from children.
There is the risk of injury and suffocation!
• Before disposing of the old or obsolete product:
1.
Unplug the product by gripping from the plug.
2.
Cut the power cable and remove it from the
appliance together with its plug
3.
Do not remove the shelves or drawers so that it is
harder for children to enter the product.
4.
Remove the doors.
5.
Keep the product in a way that it will not tip over.
6.
Do not allow children play with the old product.
• Never throw the product into fire for disposal.
There is the risk of explosion!
• If there is a lock on the door of the product, the
key should be kept out of the reach of children.
1- Safety Instructions
4 / 36 EN
Refrigerator / User Manual
Important instructions regarding safety and environment
A 1.3 - Electrical safety
• The product must be unplugged during
installation, maintenance, cleaning, repairing
and moving procedures.
• If the power cable is damaged, it must be
replaced by a qualified person specified by
the manufacturer, authorised service agent or
importer in order to avoid potential dangers.
• Do not squeeze the power cable under or
behind the product. Do not place heavy objects
on the power cable. Power cable must not be
bent excessively, pinched or get in contact with
any heat source.
• Do not use extension cords, multi-sockets or
adapters to operate the product.
• Portable multi-sockets or portable power
sources can overheat and cause fire. Therefore,
do not keep any multi-sockets behind or near
the product.
• Plug must be easily accessible. If this is not
possible, the electrical installation to which the
product is connected must contain a device
(such as a fuse, switch, circuit breaker, etc.)
which conforms to the electrical regulations and
disconnects all poles from the grid.
• Do not touch the power plug with wet hands.
• Remove the plug from the socket by gripping
the plug and not the cable.
A 1.4 - Transportation safety
• Product is heavy; do not move it alone.
• Do not hold its door when moving the product.
• Pay attention not to damage the cooling system
or the piping during transportation. If the piping
is damaged, do not operate the product and call
the authorised service agent.
A 1.5 - Installation safety
• Call the authorised service agent for installation
of the product. To make the product ready for
use, check the information in the user manual
to make sure that the electricity and water
installations are suitable. If they are not, call a
qualified electrician and plumber to have the
necessary arrangements made. Otherwise,
there is the risk of electric shock, fire, problems
with the product, or injury!
• Prior to installation, check if the product has
any defects on it. If the product is damaged, do
not have it installed.
• Place the product on a clean, flat and solid
surface and balance it with adjustable feet.
Otherwise, the product may tip over and cause
injuries.
• The installation location must be dry and
well ventilated. Do not place carpets, rugs or
similar covers under the product. Insufficient
ventilation causes the risk of fire!
• Do not cover or block the ventilation openings.
Otherwise, power consumption increases and
your product may get damaged.
• Product must not be connected to supply
systems such as solar power supplies.
Otherwise, your product may get damaged due
to sudden voltage changes!
• The more refrigerant a refrigerator contains,
the larger the installation location must be. If
the installation location is too small, flammable
refrigerant and air mixture will accumulate in
cases of refrigerant leakage in cooling system.
The required space for each 8 gr of refrigerant
is 1 m³ minimum. The amount of refrigerant in
your product is indicated on the Type Label.
• Product must not be installed in places
exposed to direct sunlight and it must be
kept away from heat sources such as hobs,
radiators, etc.
If it is inevitable to install the product close to
a heat source, a suitable insulation plate must
be used in between and the following minimum
distances must be kept to the heat source:
- Minimum 30 cm away from heat sources
such as hobs, ovens, heater units or stoves,
- Minimum 5 cm away from electric ovens.
• Protection class of your product is Type I.
Plug the product in a grounded socket that
conforms the voltage, current and frequency
values stated on the type label of the product.
The socket must be equipped with a 10 A – 16
5 / 36 EN
Refrigerator / User Manual
Important instructions regarding safety and environment
A circuit breaker. Our company shall not be
liable for any damages that will arise when
the product is used without grounding and
electrical connection in accordance with the
local and national regulations.
• Product must not be plugged in during
installation. Otherwise, there is the risk of
electric shock and injury!
• Do not plug the product in sockets that are
loose, dislocated, broken, dirty, greasy or bear
the risk of getting in contact with water.
• Route the power cable and hoses (if any) of the
product in a way that they do not cause risk of
tripping over.
• Exposing the live parts or power cable to
humidity may cause short circuit. Therefore,
do not install the product in places such as
garages or laundry rooms where humidity is
high or water may splash. If the refrigerator
gets wet with water, unplug it and call the
authorised service agent.
• Never connect your refrigerator to energy
saving devices. Such systems are harmful to
your product.
A 1.6- Operational safety
• Never use chemical solvents on the product.
There is the risk of explosion!
• If the product malfunctions, unplug it and do
not operate until it is repaired by the authorised
service agent. There is the risk of electric
shock!
• Do not place flame sources (lit candles,
cigarettes, etc.) on or close to the product.
• Do not climb on the product. There is the risk
of falling and getting injured!
• Do not damage the pipes of the cooling
system with sharp or penetrating objects.
The refrigerant that might come out when the
refrigerant pipes, pipe extensions or surface
coatings are punctured causes skin irritations
and eye injuries.
• Unless recommended by the manufacturer, do
not place or use electrical devices inside the
refrigerator/deep freezer.
• Be careful not to trap your hands or any other
part of your body in the moving parts inside the
refrigerator. Pay attention not to squeeze your
fingers between the door and the refrigerator.
Be careful when opening and closing the door
particularly if there are children around.
• Never eat ice cream, ice cubes or frozen food
right after removing them from the refrigerator.
There is the risk of frostbite!
• When your hands are wet, do not touch the
inner walls or metal parts of the freezer or
the food stored therein. There is the risk of
frostbite!
• Do not place tins or bottles that contain
carbonated drinks or freezable liquids in the
freezer compartment. Tins and bottles may
burst. There is the risk of injury and material
damage!
• Do not place or use flammable sprays,
flammable materials, dry ice, chemical
substances or similar heat-sensitive materials
near the refrigerator. There is the risk of fire and
explosion!
• Do not store explosive materials that contain
flammable materials, such as aerosol cans, in
your product.
• Do not place containers filled with liquid onto
the product. Splashing water on an electrical
part may cause electric shock or the risk of fire.
• This product is not intended for storing
medicines, blood plasma, laboratory
preparations or similar medical substances and
products subject to Medical Products Directive.
• Using the product against its intended purpose
may cause the products stored inside it to
deteriorate or spoil.
• If your refrigerator is equipped with blue light,
do not look at this light with optical tools. Do
not stare at UV LED lamp directly for a long
time. Ultraviolet light may cause eye strain.
• Do not overload the product. Objects in the
refrigerator may fall down when the door is
opened, causing injury or damage. Similar
problems may arise if any object is placed onto
the product.
• To avoid injuries, make sure that you have
cleaned all the ice and water that may have
fallen or splashed on the floor.
6 / 36 EN
Refrigerator / User Manual
Important instructions regarding safety and environment
• Change the position of the shelves/bottle
holders on the door of your refrigerator only
when they are empty. There is the risk of injury!
• Do not place objects that can fall down/tip over
onto the product. Such objects may fall down
when the door is opened and cause injuries
and/or material damage.
• Do not hit or exert excessive force on glass
surfaces. Broken glass may cause injuries and/
or material damage.
• Cooling system of your product contains
R600a refrigerant: Type of the refrigerant used
in the product is indicated on the type label.
This refrigerant is flammable. Therefore, pay
attention not to damage the cooling system
or the piping while the product is in use. If the
piping is damaged:
- Do not touch the product or the power cable,
- Keep away potential sources of fire that may
cause the product to catch fire.
- Ventilate the area where the product is
located. Do not use fans.
- Call the authorised service agent.
• If the product is damaged and you see
refrigerant leak, please stay away from the
refrigerant. Refrigerant may cause frostbite in
case of skin contact.
For products with a Water Dispenser/
Ice Machine
• Use only potable water. Do not fill the
water tank with any liquids -such as
fruit juice, milk, carbonated beverages
or alcoholic drinks- that are not suitable
for use in the water dispenser.
• There is the risk for health and safety!
• Do not allow children play with the
water dispenser or ice machine
(Icematic) in order to prevent accidents
or injuries.
• Do not insert your fingers or other
objects into the water dispenser hole,
water channel or ice machine container.
There is the risk of injury or material
damage!
A 1.7- Maintenance
and cleaning safety
• Do not pull from the door handle if you need
to move the product for cleaning purposes.
Handle may break and cause injuries if you
exert excessive force on it.
• Do not spray or pour water on or inside the
product for cleaning purposes. There is the risk
of fire and electric shock!
• Do not use sharp or abrasive tools when
cleaning the product. Do not use household
cleaning products, detergent, gas, gasoline,
thinner, alcohol, varnish etc.
• Only use cleaning and maintenance products
inside the product that are not harmful for
food.
• Never use steam or steam assisted cleaners to
clean or defrost the product. Steam gets into
contact with the live parts in your refrigerator,
causing short circuit or electric shock!
• Make sure that no water enters the electronic
circuits or lighting elements of the product.
• Use a clean and dry cloth to wipe the foreign
materials or dust on the pins of the plug. Do
not use a wet or damp cloth to clean the plug.
There is the risk of fire and electric shock!
A 1.8- HomeWhiz
• When you operate your product through
HomeWhiz application, you must observe the
safety warnings even when you are away from
the product. You must also follow the warnings
in the application.
A 1.9- Lighting
• Call the authorised service when it is required
to replace the LED/bulb used for lighting.
7 / 36 EN
Refrigerator / User Manual
C
Figures in this user manual are schematic and may not match the product exactly. If the subject parts
are not included in the product you have purchased, then those parts are valid for other models.
2 Your Refrigerator
6
*12
1- Control and indicator panel
2- Butter & Cheese section
3- Movable door shelf
4- Fridge compartment glass shelf
5- Fridge compartment crisper
6- Bottle shelf
7- The dairy (cold storage) compartment
8- Icebox drawer
9- Multizone compartment glass shelf/cooler
10- Freezer compartment drawers
11- Multizone Compartment's drawer
12- Water tank
* OPTIONAL
8 / 36 EN
Refrigerator / User Manual
3.1 Appropriate location
for installation
In order to prepare the product for use, refer the
information in the user manual and ensure that
electrical installation and water installation are
appropriate. If not, call a qualified electrician and
technician to have any necessary arrangements
carried out.
B
WARNING: Manufacturer shall not
be held liable for damages that may
arise from procedures carried out by
unauthorized persons.
B
WARNING: Product must not be plugged
in during installation. Otherwise, there is
the risk of death or serious injury!
A
WARNING: : If the door clearance of the
room where the product shall be placed is
so tight to prevent passing of the product,
remove the door of the room and pass the
product through the door by turning it to
its side; if this does not work, contact the
authorized service.
•Placetheproductonalevelfloorsurfaceto
prevent jolts.
•Installtheproductatleast30cmawayfrom
heat sources such as hobs, heater cores and
stoves and at least 5 cm away from electrical
ovens.
•Productmustnotbesubjectedtodirectsunlight
and kept in humid places.
•Yourproductrequiresadequateaircirculationto
function efficiently. If the product will be placed
in an alcove, remember to leave at least 5 cm
clearance between the product and the ceiling,
rear wall and the side walls.
•Iftheproductwillbeplacedinanalcove,
remember to leave at least 5 cm clearance
between the product and the ceiling, rear
wall and the side walls. Check if the rear wall
clearance protection component is present at
its location (if provided with the product). If the
component is not available, or if it is lost or
fallen, position the product so that at least 5 cm
3 Installation
clearance shall be left between the rear surface
of the product and the wall of the room. The
clearance at the rear is important for efficient
operation of the product.
•Donotinstalltheproductinplaceswherethe
temperature falls below -5°C.
3.2 Installing the plastic wedges
Plastic wedges supplied with the product are
used to create the distance for the air circulation
between the product and the rear wall.
1.
To install the wedges, remove the screws on the
product and use the screws supplied together with the
wedges.
2.
Insert the 2 plastic wedges onto the rear ventilation
cover as illustrated in the figure.
9 / 36 EN
Refrigerator / User Manual
Installation
3.3* Adjusting the feet
If the product stands unbalanced after installation,
adjust the feet on the front by rotating them to the
right or left.
adjusting nut
fixing nut
fixing nut
adjusting nut
3.4 Electric connection
A
WARNING: Do not make connections via
extension cables or multi-plugs.
B
WARNING: Damaged power cable must
be replaced by the Authorized Service
Agent.
C
If two coolers are to be installed side
by side, there should be at least 4 cm
distance between them.
• Our company shall not be liable for any
damages that will arise when the product
is used without grounding and electrical
connection in accordance with the national
regulations.
• Power cable plug must be within easy reach
after installation.
• Do not use extension cords or multiple socket
outlets.
To adjust the doors vertically,
Loosen the fixing nut located at the bottom.
Rotate the adjusting nut according to the position
of the door (clockwise/counter-clockwise).
Tighten the fixing nut in order to fix the position.
To adjust the doors horizontally,
Loosen the fixing nut located at the top.
Rotate the side adjusting nut according to the
position of the door (clockwise/counter-clockwise).
Tighten the fixing nut which is at the top in order to
fix the position.
10 / 36 EN
Refrigerator / User Manual
Installation
3.5 Adjusting the gap between
the upper door
•Youcanadjustthegapbetweenthefridge
compartment doors as illustrated in the figures.
•Adjustthedoorasyoudesirebyloosingthe
screws.
•Fixthedooryouhaveadjustedbytightening
the screws without changing the position of the
door.
Door shelves should be empty when
adjusting the door height.
Using a screwdriver, remove two screws of
upper hinge cover of the door you want to
adjust.
Center Screw
The hinge cover is attached after the sockets are
installed.
Replace the hinge cover and fix with two screws.
11 / 36 EN
Refrigerator / User Manual
4 Preparation
• Airflow should not be blocked by placing
foods in front of the freezer and the multizone
compartment fans. Foods should be loaded by
leaving minimum 5 cm space in front of the
protective fan grid.
• Thawing the frozen foods in the fridge
compartment both saves energy and reserves
the quality of the foods.
C
Temperature of the room where your
refrigerator is located should at least
be
10ºC /50°F. Operating your
refrigerator under cooler conditions is not
recommended with regard to its efficiency.
C
Inside of your refrigerator must be cleaned
thoroughly.
C
If two coolers are to be installed side
by side, there should be at least 4 cm
distance between them.
4.2 Recommendations about the
fresh food compartment
• Make sure that the food does not touch the
temperature sensor in fresh food compartment.
To allow the fresh food compartment to keep
its ideal storage temperature, the sensor must
not be hindered by food.
• Do not place hot foods or beverages inside the
product.
4.1 Things to be done for
saving energy
A
Connecting your refrigerator to systems
that save energy is dangerous as they may
cause damage on the product.
• For a freestanding appliance; ‘this refrigerating
appliance is not intended to be used as a built-
in appliance.
• Do not leave the doors of your refrigerator open
for a long time.
• Do not put hot food or drinks in your
refrigerator.
• Do not overload the refrigerator. Cooling
capacity will fall when the air circulation in the
refrigerator is hindered.
• Do not place the refrigerator in places subject
to direct sunlight. Install the product at least
30 cm away from heat sources such as hobs,
ovens, heater units and stoves and at least 5
cm away from electrical ovens.
• Pay attention to store your food in refrigerator
in closed containers.
• For storage flexibility it is OK to remove
some freezer compartment drawers. Power
consumption stated for your refrigerator has
been determined after removing the icematic
and the upper drawers as to allow maximum
loading.
• Since hot and humid air will not directly
penetrate into your product when the doors are
not opened, your product will optimize itself
in conditions sufficient to protect your food.
In this energy saving function, functions and
components such as compressor, fan, heater,
defrost, lighting, display and so on will operate
according to the needs to consume minimum
energy while maintaining the freshness of your
foodstuff.
• In case of multiple options are present glass
shelves must be placed so that the air outlets
at the backwall are not blocked, prefably air
outlets are remaining below the glass shelf.
This combination may help impoving air
distribution and energy efficiency.
12 / 36 EN
Refrigerator / User Manual
Preparation
4.3 Initial use
Before using the product, make sure that all
preparations have been made in accordance
with the instructions given in the "Important
instructions regarding safety and environment" and
"Installation" chapters.
• Clean the interior of the refrigerator as
recommended in the “Maintenance and
cleaning” section. Before you start the
refrigerator, make sure that the interior is dry.
• Plug the refrigerator in a grounded socket. The
interior illumination is lit when the door of the
refrigerator is opened.
• Operate the refrigerator for 6 hours without
placing any food in it and do not open its door
during this time unless it is necessary.
C
You will hear a noise when the compressor
starts up. The liquids and gases sealed
within the refrigeration system may also
give rise to noise, even if the compressor is
not running and this is quite normal.
C
Front edges of the refrigerator may
feel warm. This is normal. These areas
are designed to be warm to avoid
condensation.
13 / 36 EN
Refrigerator / User Manual
5 Operating the product
C
Figures in this user manual are schematic and may not match the product exactly. If the subject parts
are not included in the product you have purchased, then those parts are valid for other models.
5.1 Indicator panel
Touch-controlled indicator panel allows you to set the temperature and control the other functions related
to the refrigerator without opening the door of the product. Just press the relevant buttons for function
settings.
Select
Quick FreezeQuick Cool
FN
OK
3 “
3 “
1
2 3
4
5 *6
9 10 11
12
*13
14
15
16
*17
*18
19
20
27
*28
29
30
31
32
33
*34.1
*34.2
Select
Quick FreezeQuick Cool
FN
OK
3 “
3 “
7
*8
*22
21
23
24
*25
26
14 / 36 EN
Refrigerator / User Manual
Operating the product
1. Quick cooling function indicator
It turns on when the quick fridge function is
activated.
2. Fridge compartment temperature indicator
Temperature of the fridge compartment is shown;
it can be set to 8,7,6,5,4,3,2,1.
3. Fahrenheit indicator
It is a Fahrenheit indicator. When the Fahrenheit
indication is activated, the temperature set values
are shown in Fahrenheit and the relevant icon
turns on.
4. Key lock
Press key lock button continually for 3 seconds.
Key lock symbol
will light up and key lock mode will be activated.
Buttons will not function if the Key lock mode is
active. Press key lock button continually for 3
seconds again. Key lock symbol will turn off and
the key lock mode will be exited.
Press the key lock button if you want to prevent
changing of the temperature setting of the
refrigerator.
5. Power failure/High temperature / error
warning
This indicator illuminates during power failure, high
temperature failures and error warnings. During
long-term power failures, the highest temperature
value that the freezer compartment reaches will
blink on the digital display. After checking the food
located in the freezer compartment, press the
alarm off button to clear the warning.
Please refer to "solutions recommended for
troubleshooting" section on your manual if you
observe that this indicator is illuminated.
6. Filter reset icon
This icon turns on when the filter needs to be
reset.
7. Temperature change cabin icon
Indicates the cabin whose temperature is to be
changed. When the temperature change cabin icon
starts flashing, it is understood that the relevant
cabin has been selected.
8. Multizone freezer icon
Illuminate the Multizone freezer icon using the FN button;
the icon will start to flash. When you press the OK key,
Multizone cabin freezer icon turn on and operates as a
freezer.
9. Freezer compartment temperature
indicator
Temperature of the fridge compartment is shown;
it can be set to -18, -19, -20, -21, -22, -23, -24.
10. Quick freeze function indicator
It turns on when the quick freeze function is
activated.
11. Fahrenheit indicator
It is a Fahrenheit indicator. When the Fahrenheit
indication is activated, the temperature set values
are shown in Fahrenheit and the relevant icon
turns on.
12. Quick freeze function button
Press this button to activate or deactivate the quick
freeze function. When you activate the function,
the freezer compartment will be cooled to a
temperature lower than the set value.
C
Use the quick freeze function when you
want to quickly freeze the food placed
in freezer compartment. If you want
to freeze large amounts of fresh food,
activate this function before putting the
food into the product.
C
If you do not cancel it, Quick Freeze
will cancel itself automatically after 24
hours at the most or when the fridge
compartment reaches to the required
temperature.
C
This function is not recalled when
power restores after a power failure.
13. Filter reset
The filter is reset when the quick freeze button is
pressed for 3 seconds. Filter reset icon goes off.
14. FN button
Using this key, you can switch between the
functions that you want to select. Upon pressing
this key, the icon, whose function is required to be
15 / 36 EN
Refrigerator / User Manual
Operating the product
activated or deactivated, and this icon's indicator
starts flashing. The FN button gets deactivated if
not pressed for 20 seconds. You need to press this
button to change the functions again.
15. Celsius indicator
It is a Celsius indicator. When the Celsius indication
is activated, the temperature set values are shown
in Celsius and the relevant icon turns on.
16. OK button
After navigating the functions using the FN button,
when the function is cancelled via the OK button,
the relevant icon and the indicator flashes. When
the function is activated, it remains on. The
indicator continues to flash in order to show the
icon it is on.
17. Temperature change cabin icon
Indicates the cabin whose temperature is to be
changed. When the temperature change cabin icon
starts flashing, it is understood that the relevant
cabin has been selected.
18. Temperature change cabin icon
Indicates the cabin whose temperature is to be
changed. When the temperature change cabin icon
starts flashing, it is understood that the relevant
cabin has been selected.
19. Set increasing button
Select the relevant cabin with the select button;
the cabin icon representing the relevant cabin will
start to flash. If you press the set increasing button
during this process, the set value gets increased. If
you keep pressing it in a loop, the set value returns
to the beginning.
20. Temperature change cabin icon
Indicates the cabin whose temperature is to be
changed. When the temperature change cabin icon
starts flashing, it is understood that the relevant
cabin has been selected.
21. Setting the Celsius and Fahrenheit
indicator
Illuminate this key using the FN key and select
Fahrenheit and Celsius via the OK key. When
the relevant temperature type is selected, the
Fahrenheit and Celsius indicator turns on.
22. Ice machine off icon
Press the FN key (until it reaches the ice icon and
the lower line) to switch off the ice machine. The
ice machine off icon and the ice machine function
indicator start flashing when you Illuminate them,
thus you can understand whether the ice machine
will be turned on or off. When you press the OK
button, the ice machine icon lights continuously
and the Indicator continues to flash during this
process. If you do not press any button after 20
seconds, the icon and the indicator remains on.
Thus, the ice machine is switched off. In order to
switch on the ice machine again, Illuminate the
icon and the indicator; thus, both the ice machine
off icon and the indicator will start flashing. If you
do not press any button within 20 seconds, the
icon and the indicator will go off and thus the ice
machine will be switched on again.
C
Indicates whether the icematic is
on or off.
C
Water flow from water tank
will stop when this function is
selected. However, ice made
previously can be taken from the
icematic.
23. Eco fuzzy function icon
Press the FN key (until it reaches the letter e
icon and the lower line) to activate the eco fuzzy.
When you Illuminate the eco fuzzy icon and the
eco fuzzy function indicator, they start flashing.
Thus, you can understand whether the eco fuzzy
function will be activated or deactivated. When you
press the OK button, the eco fuzzy function icon
lights continuously and the Indicator continues to
flash during this process. If you do not press any
button after 20 seconds, the icon and the indicator
remains on. Thus, the eco fuzzy function is
activated. In order to cancel the eco fuzzy function,
Illuminate the icon and the indicator again and
press the OK key. Thus, both the eco fuzzy function
icon and the indicator will start flashing. If you do
not press any button within 20 seconds, the icon
and the indicator will go off and the eco fuzzy
function will be cancelled.
16 / 36 EN
Refrigerator / User Manual
Operating the product
24. Vacation function icon
Press the FN key (until it reaches the umbrella
icon and the lower line) to activate the vacation
function. When you Illuminate the vacation
function icon and the vacation function indicator,
they start flashing. Thus, you can understand
whether the vacation function will be activated or
deactivated. When you press the OK button, the
vacation function icon lights continuously and thus
the Vacation function is activated. The Indicator
continues to flash during this process. Press the
OK key to cancel the vacation function. Thus, both
the vacation function icon and the indicator will
start flashing and the vacation function will be
cancelled.
25. Multizone fridge icon
When you select the Multizone fridge icon using
the FN button and press the OK key, the Multizone
cabin turns into a fridge cabin and operates as a
cooler.
26. Celsius indicator
It is a Celsius indicator. When the Celsius indication
is activated, the temperature set values are shown
in Celsius and the relevant icon turns on.
27. Set decreasing function
Select the relevant cabin with the select button;
the cabin icon representing the relevant cabin
will start to flash. If you press the set decreasing
button during this process, the set value gets
decreased. If you keep pressing it in a loop, the set
value returns to the beginning.
28. Temperature change cabin icon
Indicates the cabin whose temperature is to be
changed. When the temperature change cabin icon
starts flashing, it is understood that the relevant
cabin has been selected.
29. Temperature change cabin icon
Indicates the cabin whose temperature is to be
changed. When the temperature change cabin icon
starts flashing, it is understood that the relevant
cabin has been selected.
30. Key lock
Press key lock button simultaneously for 3 sec-
onds. Key lock symbol
will light up and key lock mode will be activated.
Buttons will not function if the Key lock mode is
active. Press key lock button simultaneously for 3
seconds again. Key lock symbol will turn off and
the key lock mode will be exited.
Press the key lock button if you want to prevent
changing of the temperature setting of the
refrigerator.
31.Select button
Use this button to select the cabin whose tem-
perature you want to change. Switch between
the cabins by pressing this button. The selected
cabin can be understood from the cabin icons
(7,17,18,20,28,29). Whichever cabin icon is flash-
ing, the cabin, whose temperature set value you
want to change, is selected. Then, you can change
the set value by pressing the cabin set value
decreasing button (27) and the cabin set value in-
creasing button (19). If you do not press the select
button for 20 seconds, the cabin icons will go off.
You need to press this key to select a cabin again.
32. Alarm off warning
In case of power failure/high temperature
alarm, after checking the foods in the freezer
compartment, press the alarm off button to clear
the warning.
33. Quick cooling function button
The button has two functions. To activate or
deactivate the quick cool function, press it briefly.
Quick Cool indicator will turn off and the product
will return to its normal settings.
C
Use quick cooling function when you
want to quickly cool the food placed
in the fridge compartment. If you want
to cool large amounts of fresh food,
activate this function before putting the
food into the product.
17 / 36 EN
Refrigerator / User Manual
Operating the product
C
If you do not cancel it, quick cooling
will cancel itself automatically after 1
hours at the most or when the fridge
compartment reaches to the required
temperature.
C
If you press the quick cooling button
repeatedly with short intervals, the
electronic circuit protection will be
activated and the compressor will not
start up immediately.
C
This function is not recalled when
power restores after a power failure.
34. 1 Multizone temperature indicator
Temperature set values of the Multizone cabin are
displayed.
18 / 36 EN
Refrigerator / User Manual
Operating the product
C
Figures in this user manual are schematic and may not match the product exactly. If the subject parts
are not included in the product you have purchased, then those parts are valid for other models.
5.2 Indicator panel
Touch-control indicator panel allows you to set the temperature and control the other functions related to
the refrigerator. Just press the relevant buttons for function settings.
2
1
6
7
5
8
*9
24
12
23
14
15
17
18 19
3
4
13
22
21
*20
*11
10
16
26
25
1-On/Off function
Press the On/Off button for 3 seconds to turn off or
turn on the fridge.
2. Quick freeze function button
Press this button to activate or deactivate the quick
freeze function. When you activate the function,
the freezer compartment will be cooled to a
temperature lower than the set value.
C
Use the quick freeze function when you
want to quickly freeze the food placed
in freezer compartment. If you want
to freeze large amounts of fresh food,
activate this function before putting the
food into the product.
C
If you do not cancel it, Quick Freeze
will cancel itself automatically after 24
hours at the most or when the fridge
compartment reaches to the required
temperature.
C
This function is not recalled when
power restores after a power failure.
3.Select button
Use this button to select the cabin whose
temperature you want to change. Switch between
the cabins by pressing this button. The selected
cabin can be understood from the cabin icons (6,
25, 24 ). Whichever cabin icon is power on, the
cabin, whose temperature set value you want to
change, is selected. Then, you can change the set
value by pressing the cabin set value Temperature
Adjustment button (4)
4.Temperature Adjustment / Temperature
Decrease
When pressed, decreases the temperature of the
selected compartment.
5-Quick freeze Indicator
This icon lits when the Quick freeze function is
active.
6. Fridge compartment indicator
When this indicator is active, the temperate
of the fridge compartment is displayed on the
temperature value indicator.Fridge compartment
can be set to 8, 7, 6, 5, 4, 3, 2 or 1°C / 46, 45,
44, 43, 42, 41, 40,39,38,37,36,35,34 or 33°F by
pressing Temperature Adjustment button (4).
19 / 36 EN
Refrigerator / User Manual
Operating the product
7. Temperature value indicator
Shows the temperature value of the selected
compartment.
8. Fahrenheit indicator
It is a Fahrenheit indicator. When the Fahrenheit
indication is activated, the temperature set values
are shown in Fahrenheit and the relevant icon
turns on.
9. Joker fridge icon
When you select the joker fridge icon using the FN
button (16) and press the OK button (17) the joker
cabin turns into a fridge cabin and operates as a
cooler.
10. Joker cabin icon
It shows joker cabin icon.
11. Joker freezer icon
When you select the joker freezer icon using the
FN button (16) and press the OK button (17) the
joker cabin turns into a freezer cabin and operates
as a freezer.
12. Power failure/High temperature / error
warning
This indicator illuminates during power failure, high
temperature failures and error warnings. During
long-term power failures, the highest temperature
value that the freezer compartment reaches will
blink on the digital display. After checking the food
located in the freezer compartment, press the
alarm off button (19) to clear the warning.
13.Setting the Celsius and Fahrenheit
indicator
Hover over this key using the FN key and select
Fahrenheit and Celsius via the OK key. When
the relevant temperature type is selected, the
Fahrenheit and Celsius indicator turns on.
14. Vacation function icon
Press the FN key (until it reaches the umbrella
icon) to activate the vacation function. When you
hover over the vacation function icon, it start
flashing. Thus, you can understand whether the
vacation function will be activated or deactivated.
When you press the OK button, the vacation
function indicator lights continuously and thus the
Vacation function is activated. Press the OK key
to cancel the vacation function. Thus, the vacation
function indicator will start flashing and the
vacation function will be cancelled.
15. Quick cooling function indicator
It turns on when the quick fridge function is
activated.
16. FN button
Using this key, you can switch between the
functions that you want to select. Upon pressing
this key, the icon, whose function is required to be
activated or deactivated, and this icon’s indicator
starts flashing. The FN button gets deactivated if
not pressed for 20 seconds. You need to press this
button to change the functions again.
17. OK button
After navigating the functions using the FN button,
when the function is cancelled via the OK button,
the relevant indicator flashes. When the function is
activated, it remains on. The indicator continues to
flash in order to show the icon it is on.
18. Quick cooling function button
The button has two functions. To activate or
deactivate the quick cool function, press it briefly.
Quick Cool indicator will turn off and the product
will return to its normal settings.
19. Alarm off warning
In case of power failure/high temperature
alarm, after checking the foods in the freezer
compartment, press the alarm off button to clear
the High temperature warning icon (12).
20. Filter reset
The filter is reset when the alarm off button (19) is
pressed for 3 seconds. Filter reset icon goes off.
21. Eco fuzzy function icon
Press the FN key (until it reaches the letter e
icon) to activate the eco fuzzy. When you hover
over the eco fuzzy icon it start flashing. Thus,
you can understand whether the eco fuzzy
function will be activated or deactivated. When
you press the OK button, the eco fuzzy function
icon lights continuously during this process. If you
do not press any button after 20 seconds, the
icon remains on. Thus, the eco fuzzy function is
20 / 36 EN
Refrigerator / User Manual
Operating the product
activated. In order to cancel the eco fuzzy function,
hover over the icon again and press the OK key.
Thus, the eco fuzzy function icon will start flashing.
If you do not press any button within 20 seconds,
the icon will go off and the eco fuzzy function will
be cancelled.
22. Ice machine off icon
Press the FN key (until it reaches the ice icon) to
switch off the ice machine. The ice machine off
icon start flashing when you hover over it, thus you
can understand whether the ice machine will be
turned on or off. When you press the OK button,
the ice machine icon lights continuously during
this process. If you do not press any button after
20 seconds, the icon and the indicator remains on.
Thus, the ice machine is switched off. In order to
switch on the ice machine again, hover over the
icon. The ice machine off icon will start flashing. If
you press ok button, the icon will go off and thus
the ice machine will be switched on again.
C
Indicates whether the icematic is
on or off.
C
Water flow from water tank
will stop when this function is
selected. However, ice made
previously can be taken from the
icematic.
23. Filter reset icon
This icon turns on when the filter needs to be
reset.
24. Celsius indicator
It is a Celsius indicator. When the Celsius indication
is activated, the temperature set values are shown
in Celsius and the relevant icon turns on.
25. Joker compartment indicator
When this indicator is active, the temperate of the
joker compartment is displayed on the temperature
value indicator. Joker compartment set values
change by pressing Temperature Adjustment
button (4).
26. Freezer compartment indicator
When this indicator is active, the temperate of
the freezer compartment is displayed on the
temperature value indicator.Freezer compartment
can be set to -16, -18, -19, -20, -21, -22 and -24
°C /0, -2, -4, -6, -8, -10 and -12°F by pressing
Temperature Adjustment button (3).
5.3 Freezing fresh food
• In order to preserve the quality of the food, it
shall be frozen as quickly as possible when it is
placed in the freezer compartment, use the fast
freezing feature for this purpose.
• You may store the food longer in freezer
compartment when you freeze them while they
are fresh.
• Pack the food to be frozen and close the
packing so that it would not allow entrance of
air.
• Ensure that you pack your food before putting
them in the freezer. Use freezer containers,
foils and moisture-proof papers, plastic
bags and other packing materials instead of
traditional packing papers.
• Label each pack of food by adding the date
before freezing. You may distinguish the
freshness of each food pack in this way when
you open your freezer each time. Store the food
frozen before in the front side of compartment
to ensure that they are used first.
• Frozen food must be used immediately after
they are thawed and they should not be re-
frozen.
• Do not freeze too large quantities of food at
one time.
• “24 hours before freezing the fresh food,
activate “Quick Freeze Function”.
The fresh food packages should be placed in
bottom drawers.
After placing fresh food packages, activate
“Quick Freeze Function” again.
When the freezer cabinet is set to quick
function, joker cabinet is also set to quick
function automatically.
“
21 / 36 EN
Refrigerator / User Manual
Operating the product
Freezer
Compartment
Setting
Fridge
Compartment
Setting
Remarks
-18°C 4°C This is the normal recommended setting.
-20, -22 or
-24°C
4°C
These settings are recommended when the ambient temperature
exceeds 30°C.
Quick Freeze 4°C
Use when you wish to freeze your food in a short time. Your product
will return to its previous mode when the process is over.
-18°C or colder 2°C
Use these settings if you think that your fridge compartment is not
cold enough because of the hot ambient conditions or frequent
opening and closing of the door.
5.4 Recommendations for
preserving the frozen food
Compartment shall be set to -18°C at least.
1. Put packages in the freezer as quickly as
possible after purchase without allowing the
to thaw.
2. Check whether the "Use By" and "Best
Before" dates on the packaging are expired or
not before freezing it.
3. Ensure that the package of the food is not
damaged.
5.5 Deep-freeze information
According to IEC 62552 standards, the product
shall freeze at least 4.5 kg of food at 25°C
ambient temperature to -18°C or lower within 24
hours for every 100-litres of freezer volume.
It is possible to preserve the food for a long time
only at -18°C or lower temperatures.
You can keep the freshness of food for many
months (at -18°C or lower temperatures in the
deep freeze).
Foods to be frozen should not be allowed to come
in contact with the previously frozen items to
prevent them from getting thawed partially.
Boil the vegetables and drain their water in order
to store vegetables for a longer time as frozen.
After draining their water, put them in air-proof
packages and place them inside the freezer. Food
such as bananas, tomatoes, lettuce, celery, boiled
eggs, potatoes are not suitable for freezing. When
these foods are frozen, only their nutritional value
and taste shall be affected negatively. They shall
not be spoiled so that they would create a risk for
human health.
5.6 Placing the food
Freezer
compartment
shelves
Various frozen food such
as meat, fish, ice cream,
vegetables and etc.
Refrigerator
compartment
shelves
Food in pans, covered plates
and closed containers, eggs (in
closed container)
Door shelves
of fridge
compartment
Small and packaged food or
beverage
Crisper Vegetables and fruits
Fresh zone
compartment
Delicatessen (breakfast food,
meat products that shall be
consumed in a short time)
22 / 36 EN
Refrigerator / User Manual
Operating the product
5.7 Door open warning
(This feature is optional)
An audio warning signal will be given when the
door of your product is left open for 1 minute. This
warning will be muted when the door is closed or
any of the display buttons (if any) are pressed.
5.8 Crisper
Crisper of the refrigerator is designed specially
to keep the vegetables fresh without loosing their
humidity. For this purpose, cool air circulation is
intensified around the crisper in general. Remove
the door shelves that stand against the crisper
before removing the crisper.
5.9 Humidity-controlled crisper
Humidity rates of fruits and vegetables are kept
under control thanks to the humidity-controlled
crisper and thus the food is ensured to stay fresh for
a longer period.
We recommend that you place leafy vegetables such
as lettuce and spinach and vegetables sensitive to
humidity loss as horizontally as possible when put
-
ting them in the crisper; not in a horizontal position
on their roots.
While the vegetables are being replaced, their
specific weights should be taken into consideration.
Heavy and hard vegetables must be placed at the
bottom of the crisper and light and soft vegetables
must be on the upper part.
Never leave the vegetables in their plastic bags in
the crisper. If they are left in their plastic bags, this
will cause them to rot in a little while. If you not
prefer the vegetable to get in contact with other veg
-
etables for hygienic reasons, use perforated paper or
a similar material instead of plastic bags.
Do not place pears, apricots, peaches etc., especially
those fruits that generate large amounts of ethylene,
in the same crisper with other fruits and vegetables.
The ethylene gas emitted by these fruits cause other
fruits to ripen sooner and to rot in a
shorter span of
time.
5.10 Egg tray
You can install the egg holder to the desired door
or body shelf.
Never keep the egg holder in the freezer
compartment.
5.11 Movable Middle Section
Movable middle section is intended to prevent
the cold air inside your refrigerator from escaping
outside.
1- Sealing is provided when the gaskets on the
door presses on the surface of the movable middle
section while the fridge compartment doors are
closed.
2- Another reason that your refrigerator is
equipped with a movable middle section is that it
increases the net volume of the fridge compart-
ment. Standard middle sections occupy some
non-usable volume in the refrigerator.
3-Movable middle section is closed when the left
door of the fridge compartment is opened.
4-It must not be opened manually. It moves under
the guidance of the plastic part on the body while
the door is closed.
23 / 36 EN
Refrigerator / User Manual
Operating the product
5.12 Cool Control Storage
Compartment
The Cool Control Storage Compartment of your
refrigerator may be used in any desired mode
by adjusting it to fridge (2/4/6/8 °C) or freezer
(-18/-20/-22/-24) temperatures. You can keep the
compartment at the desired temperature with the
Cool Control Storage Compartment's Temperature
Setting Button. The temperature of the Cool
Control Storage Compartment may be set to 0 and
10 degrees in addition to the fridge compartment
temperatures and to -6 degrees in addition to
the freezer compartment temperatures. 0 degree
is used to store the deli products longer, and -6
degrees is used to keep the meats up to 2 weeks
in an easily sliceable condition.
The feature of switching to a Fridge or Freezer
compartment is provided by a cooling element
located in the closed section (Compressor
Compartment) behind the refrigerator. During
operation of this element, sounds similar to the
sound of seconds heard from an analogue clock
may be heard. This is normal and is not fault
cause.
5.13 Blue light/HarvestFresh
*May not be available in all models
For the blue light,
Fruits and vegetables stored in the crispers that
are illuminated with a blue light continue their pho-
tosynthesis by means of the wavelength effect of
blue light and thus preserve their vitamin content.
ForHarvestFresh,
Fruits and vegetables stored in crispers illuminated
with the HarvestFresh technology preserve their
vitamins for a longer time thanks to the blue,
green, red lights and dark cycles, which simulate
a day cycle.
If you open the door of the refrigerator during
the dark period of the HarvestFresh technology,
the refrigerator will automatically detect this and
enable the blue-green or red light to illuminate
the crisper for your convenience. After you have
closed the door of the refrigerator, the dark period
will continue, representing the night time in a day
cycle.
5.14 Odour filter
Odour filter in the air duct of the fridge
compartment prevents build-up of unpleasant
odours in the refrigerator.
24 / 36 EN
Refrigerator / User Manual
Operating the product
5.15 Use of internal water dispenser
and water dispenser at the door
(in some models)
After connecting the refrigerator to a water source
or replacing the water filter, flush the water
system. Use a sturdy container to depress and
hold the water dispenser lever for 5 seconds,
then release it for 5 seconds. Repeat until water
begins to flow. Once water begins to flow, continue
depressing and releasing the dispenser paddle
(5 seconds on, 5 seconds off) until a total of 4
gal. (15L) has been dispensed. This will flush air
from the filter and water dispensing system, and
prepare the water filter for use. Additional flushing
may be required in some households. As air is
cleared from the system, water may spurt out of
the dispenser.
Allow 24 hours for the refrigerator to cool down
and chill water. Dispense enough water every week
to maintain a fresh supply.
C
After 5 minutes of continuous
dispensing, the dispenser will stop
dispensing water to avoid flooding.
To continue dispensing, press the
dispenser paddle again.
5.16 Dispensing water
Hold a container under the dispenser spout while
pressing the dispenser pad.
Release the dispenser pad to stop dispensing.
C
It is normal for the first few glasses of
water taken from the dispenser to be
warm.
C
If the water dispenser is not used for a long
period of time, dispose of first few glasses
of water to obtain fresh water.
During initial use, you will have to wait
approximately 24 hours for the water to cool down.
Take out the glass a little while after you pull the
trigger.
Select
Quick FreezeQuick Cool
FN
OK
3 “
3 “
Select
Quick FreezeQuick Cool
FN
OK
3 “
3 “
Water dispenser at the door (in some models)
Select
Quick FreezeQuick Cool
FN
OK
3 “
3 “
Select
Quick FreezeQuick Cool
FN
OK
3 “
3 “
Built-in water dispenser (in some models)
25 / 36 EN
Refrigerator / User Manual
Operating the product
Built-in water dispenser (in some models)
5.17 For using water dispenser
A
Before using your fridge first time and
after replacing your water filter, water
dispenser may drip drops of water. To
prevent water dripping or leaking from
dispenser, please bleed the air from
the system by dispensing 5-6 gallons
(about 20 liter) of water through the
water dispenser before the first use
and every time after you change
the water filter. This will remove any
air trapped in the system and stop
the water dispenser from leaking.
Checking coupler position and the
straightness of water line at the back
of the unit will be required if there’s an
obstruction in water flow.
C
If your water dispenser is leaking just a few
drops of water after you have dispensed some
water, this is normal.
5.18 Icematic
(in some models)
To get ice from the icematic, fill the water tank
in the fridge compartment with water up to the
maximum level.
Ice cubes in the ice drawer may stick to each
other and become a bulk due to hot and humid
air in approximately 15 days. This is normal. If you
cannot break the bulk apart, you can empty the ice
container and make ice again.
C
It is recommended to change the water
in the water tank if it remains in the
water tank for more then 2-3 weeks.
C
Strange noises you hear from the refrig-
erator at 120-minute intervals are the
sounds of ice-making and pouring. This
is normal.
C
If you do not want to make ice, press the Ice
off icon to stop the icematic to save energy
and prolong the service life of your refrigerator.
C
It is normal that a few drops of water drop
from the dispenser after you have taken water.
26 / 36 EN
Refrigerator / User Manual
Operating the product
5.19 Icematic and ice
storage container
(in some models)
Using the Icematic
Fill the Icematic with water and place it into its
seat. Your ice will be ready approximately in two
hours. Do not remove the Icematic from its seating
to take ice.
Turn the knobs on the ice reservoirs clockwise by
90 degrees.
Ice cubes in the reservoirs will fall down into the
ice storage container below.
You may take out the ice storage container and
serve the ice cubes.
If you wish, you may keep the ice cubes in the ice
storage container.
Ice storage container
Ice storage container is only intended for
accumulating the ice cubes. Do not put water in it.
Otherwise, it will break.
5.20 The dairy (cold storage)
compartment
(This feature is optional)
“The dairy (cold storage) compartment”
provides lower temperature than the refrigerator
compartment. Use this compartment to store
delicatessen (salami, sausages, dairy products
and etc. ) that requires lower storage temperature
or meat, chicken or fish products for immediate
consumption. Do not store fruits and vegetables in
this compartment.
27 / 36 EN
Refrigerator / User Manual
6 Maintenance and Cleaning
Cleaning the product regularly will prolong its
service life.
B
WARNING: Disconnect the power
before cleaning the refrigerator.
• Do not use sharp and abrasive tools,
soap, house cleaning materials,
detergents, gas, gasoline, varnish and
similar substances for cleaning.
• Melt a teaspoonful of carbonate in
the water. Moisten a piece of cloth
in the water and wring out. Wipe the
device with this cloth and dry off
thoroughly.
• Take care to keep water away from
the lamp’s cover and other electrical
parts.
• Clean the door using a wet cloth.
Remove all items inside to detach
the door and chassis shelves. Lift the
door shelves up to detach. Clean and
dry the shelves, then attach back in
place by sliding from above.
• Do not use chloric water or cleaning
products on the exterior surface and
chrome-coated parts of the product.
Chlorine will cause rust on such
metallic surfaces.
• Do not use sharp, abrasive tools,
soap, household cleaning agents,
detergents, kerosene, fuel oil,
varnish etc. to prevent removal and
deformation of the prints on the
plastic part. Use lukewarm water and
a soft cloth for cleaning and then
wipe it dry.
6.1. Preventing Bad Odour
The product is manufactured free of any
odorous materials. However, keeping the food in
inappropriate sections and improper cleaning of
internal surfaces may lead to malodour.
To avoid this, clean the inside with carbonated
water every 15 days.
• Keep the foods in sealed holders.
Microorganisms may spread out
of unsealed food items and cause
malodour.
• Do not keep expired and spoilt foods
in the refrigerator.
6.2. Protecting Plastic Surfaces
Oil spilled on plastic surfaces may damage the
surface and must be cleaned immediately with
warm water.
28 / 36 EN
Refrigerator / User Manual
7. Troubleshooting
Check this list before contacting the service. Doing so will save you time and money. This list includes
frequent complaints that are not related to faulty workmanship or materials. Certain features mentioned
herein may not apply to your product.
The refrigerator is not working.
• The power plug is not fully settled. >>> Plug it in to settle completely into the socket.
• The fuse connected to the socket powering the product or the main fuse is blown. >>> Check
the fuses.
Condensation on the side wall of the cooler compartment (MULTI ZONE, COOL,
CONTROL and FLEXI ZONE).
• The door is opened too frequently >>> Take care not to open the product’s door too frequently.
• The environment is too humid. >>> Do not install the product in humid environments.
• Foods containing liquids are kept in unsealed holders. >>> Keep the foods containing liquids in
sealed holders.
• The product’s door is left open. >>> Do not keep the product’s door open for long periods.
• The thermostat is set to too low temperature. >>> Set the thermostat to appropriate
temperature.
Compressor is not working.
• In case of sudden power failure or pulling the power plug off and putting back on, the gas
pressure in the product’s cooling system is not balanced, which triggers the compressor
thermic safeguard. The product will restart after approximately 6 minutes. If the product does
not restart after this period, contact the service.
• Defrosting is active. >>> This is normal for a fully-automatic defrosting product. The defrosting
is carried out periodically.
• The product is not plugged in. >>> Make sure the power cord is plugged in.
• The temperature setting is incorrect. >>> Select the appropriate temperature setting.
• The power is out. >>> The product will continue to operate normally once the power is
restored.
The refrigerator's operating noise is increasing while in use.
• The product’s operating performance may vary depending on the ambient temperature
variations. This is normal and not a malfunction.
The refrigerator runs too often or for too long.
29 / 36 EN
Refrigerator / User Manual
Troubleshooting
• The new product may be larger than the previous one. Larger products will run for longer
periods.
• The room temperature may be high. >>> The product will normally run for long periods in
higher room temperature.
• The product may have been recently plugged in or a new food item is placed inside. >>> The
product will take longer to reach the set temperature when recently plugged in or a new food
item is placed inside. This is normal.
• Large quantities of hot food may have been recently placed into the product. >>> Do not place
hot food into the product.
• The doors were opened frequently or kept open for long periods. >>> The warm air moving
inside will cause the product to run longer. Do not open the doors too frequently.
• The freezer or cooler door may be ajar. >>> Check that the doors are fully closed.
• The product may be set to temperature too low. >>> Set the temperature to a higher degree
and wait for the product to reach the adjusted temperature.
• The cooler or freezer door washer may be dirty, worn out, broken or not properly settled. >>>
Clean or replace the washer. Damaged / torn door washer will cause the product to run for
longer periods to preserve the current temperature.
The freezer temperature is very low, but the cooler temperature is adequate.
• The freezer compartment temperature is set to a very low degree. >>> Set the freezer
compartment temperature to a higher degree and check again.
The cooler temperature is very low, but the freezer temperature is adequate.
• The cooler compartment temperature is set to a very low degree. >>> Set the freezer
compartment temperature to a higher degree and check again.
The food items kept in cooler compartment drawers are frozen.
• The cooler compartment temperature is set to a very low degree. >>> Set the freezer
compartment temperature to a higher degree and check again.
The temperature in the cooler or the freezer is too high.
• The cooler compartment temperature is set to a very high degree. >>> Temperature setting
of the cooler compartment has an effect on the temperature in the freezer compartment. Wait
until the temperature of relevant parts reach the sufficient level by changing the temperature of
cooler or freezer compartments.
• The doors were opened frequently or kept open for long periods. >>> Do not open the doors
too frequently.
• The door may be ajar. >>> Fully close the door.
• The product may have been recently plugged in or a new food item is placed inside. >>> This
is normal. The product will take longer to reach the set temperature when recently plugged in
or a new food item is placed inside.
• Large quantities of hot food may have been recently placed into the product. >>> Do not place
hot food into the product.
Shaking or noise.
• The ground is not level or durable. >>> If the product is shaking when moved slowly, adjust
the stands to balance the product. Also make sure the ground is sufficiently durable to bear the
product.
• Any items placed on the product may cause noise. >>> Remove any items placed on the
product.
30 / 36 EN
Refrigerator / User Manual
Troubleshooting
The product is making noise of liquid flowing, spraying etc.
• The product’s operating principles involve liquid and gas flows. >>> This is normal and not a
malfunction.
There is sound of wind blowing coming from the product.
• The product uses a fan for the cooling process. This is normal and not a malfunction.
There is condensation on the product's internal walls.
• Hot or humid weather will increase icing and condensation. This is normal and not a
malfunction.
• The doors were opened frequently or kept open for long periods. >>> Do not open the doors
too frequently; if open, close the door.
• The door may be ajar. >>> Fully close the door.
There is condensation on the product's exterior or between the doors.
• The ambient weather may be humid, this is quite normal in humid weather. >>> The
condensation will dissipate when the humidity is reduced.
The interior smells bad.
• The product is not cleaned regularly. >>> Clean the interior regularly using sponge, warm
water and carbonated water.
• Certain holders and packaging materials may cause odour. >>> Use holders and packaging
materials without free of odour.
• The foods were placed in unsealed holders. >>> Keep the foods in sealed holders. Micro-
organisms may spread out of unsealed food items and cause malodour. Remove any expired or
spoilt foods from the product.
The door is not closing.
• Food packages may be blocking the door. >>> Relocate any items blocking the doors.
• The product is not standing in full upright position on the ground. >>> Adjust the stands to
balance the product.
• The ground is not level or durable. >>> Make sure the ground is level and sufficiently durable
to bear the product.
The vegetable bin is jammed.
• The food items may be in contact with the upper section of the drawer. >>> Reorganize the
food items in the drawer.
If The Surface Of The Product Is Hot.
• High temperatures may be observed between the two doors, on the side panels and at the rear
grill while the product is operating. This is normal and does not require service maintenance!Be
careful when touching these areas.
A
WARNING:
If the problem persists after following the instructions in this section, contact your
vendor or an Authorised Service. Do not try to repair the product.
31 / 36 EN
Refrigerator / User Manual
BEKO UK AND IRELAND STANDARD MANUFACTURER GUARANTEE TERMS AND CONDITIONS
Your new Beko product is guaranteed against faulty materials, defective components or manufacturing
defects.
The standard guarantee starts from the date of original purchase of the product, and lasts for a period of
twelve (12) months unless Beko plc (the “Manufacturer”) agrees to extend the guarantee for the product
in writing.
If you have purchased an American style Fridge freezer, the standard guarantee starts from the date of
original purchase of the product, and lasts for a period of twenty four (24) months unless Beko plc (the
“Manufacturer”) agrees to extend the guarantee for the product in writing.
If you have any questions about the guarantee on your product (including how long it is valid), please
contact your retailer or our contact centre on
0333 207 971(UK and Northern Ireland) or 01 862 3411 (Republic of Ireland)
This guarantee does not in any way diminish or affect your statutory rights in connection with the
product. This guarantee is in addition to your statutory rights as a consumer. If you have any questions
about these rights, please contact the retailer from which you purchased the product. In certain
circumstances, it is possible that your statutory rights may offer additional or higher levels of protection
than those offered under the terms of this guarantee.
What is covered by this guarantee?
• Repairs to the product required as a result of faulty materials, defective components or manufacturing
defects.
• Functional replacement parts to repair a product.
• The costs of a Beko Approved Engineer to carry out the repair.
What is not covered?
• Transit and delivery damage.
• Cabinet or appearance parts, including but not limited to control knobs, flaps and handles.
• Accessories and/or consumable items including but not limited to ice trays, scrapers, cutlery baskets,
filters and light bulbs.
• Repairs necessary as a direct or indirect result of:
- Accidental damage, misuse or abuse of a product.
- An attempted repair of a product by anyone other than a Beko Approved Engineer (the
“Engineer”).
- Installation or use of a product where such installation or use fails to meet the requirements
contained in this guarantee or the User Instructions Booklet.
• Repairs to a product operated at any time on commercial or non-residential household premises (unless
we have previously agreed to the installation environment).
This guarantee is limited to the cost of repairing the product. To the extent permitted by law, the
Manufacturer does not accept and will not be held liable for any financial loss incurred in connection
with the failure of any product to operate in accordance with the expected standards. Such financial loss
includes but is not limited to loss arising from:
32 / 36 EN
Refrigerator / User Manual
• Time taken off work.
• Damaged food, clothing or other items.
• Meals taken at restaurants or from takeaways.
• General compensation for inconvenience.
Important Notes
1. Your product is designed and built for domestic household use only.
2. The guarantee will automatically be void if the product is installed or is used in commercial
or non-residential domestic household premises, unless we have previously agreed to the installation
environment.
3. The product must be correctly installed, located and operated in accordance with the instructions
contained in the User Instructions Booklet provided with your product.
4. Professional installation by a qualified Electrical Domestic Appliance Installer is recommended
for all Washing Machines, Dishwashers and Electric Cookers (as incorrect installation may result in you
having to pay for the cost of repairing the product).
5. Gas Cookers must be professionally installed by a Gas Safe (or Gas Networks Ireland for Republic
of Ireland) registered gas installer.
6. This guarantee is given in respect of products purchased and used within the United Kingdom
and the Republic of Ireland.
7. This guarantee is effective from the initial date of purchase of a new product from an authorised
retailer and will be void if the product is resold.
8. This guarantee does not apply to graded sales (where the product is purchased as a “second”).
9. Possession of a copy of these terms and conditions does not necessarily mean that a product
has the benefit of this guarantee. If you have any questions, please call our Call Centre on the number
set out above.
10. The Manufacturer reserves the right to terminate the guarantee if its staff or representatives are
subjected to physical or verbal abuse in the course of carrying out their duties.
11. Optional extras, where available (i.e. extendable feet) are supplied on a chargeable basis only.
Does Beko offer replacements?
This is a repair-only guarantee. On occasion, the Manufacturer may at its sole discretion, replace your
product with a new product instead of carrying out a repair. Where a replacement is offered, this would
normally be an identical model but when this is not possible, a model of similar specification will be
provided. The Manufacturer will cover the costs and arrange for the delivery of the new product and for
the return of the old product. Any costs related to disconnecting the faulty product and installing the
replacement product will not be borne by the Manufacturer unless previously agreed to in writing. The
original guarantee will continue to apply to the replacement product; the new product will not come with
a new guarantee.
33 / 36 EN
Refrigerator / User Manual
When will the repair take place?
Our Engineers work Monday to Friday 9.00am to 5.00pm. Appointments outside these hours may be
possible at the sole discretion of the Manufacturer but cannot be guaranteed. Whilst our Engineers will
endeavour to minimize inconvenience and to meet requests for specific timed appointments, this cannot
be guaranteed. We will not be liable for delays or if it is unable to carry out a repair because a convenient
appointment cannot be arranged.
Will there be any charge for the repairs?
It is your responsibility to provide evidence to the Engineer that your product is covered by this guarantee with a
proof of purchase. The Manufacturer reserves the right to charge for the reasonable cost of any service call if:
• You cannot provide evidence that your product is covered by this guarantee.
• Where a service call has been made and the engineer finds that there is no fault with your product.
• That your product has not been installed or operated in accordance with the User Instructions Booklet.
• That the fault was caused by something other than faulty materials, defective components or
manufacturing defects.
• For missed appointments.
Payment of these costs are due immediately upon the Engineer providing you with an invoice. The
Manufacturer reserves the right to terminate the guarantee if you fail to pay the costs for the service call
in a timely manner.
If you are a resident of the United Kingdom, this guarantee will be governed by English law and subject to
the English Courts, save where you live in another part of the United Kingdom, in which case the law and
courts of that location will apply.
If you are resident in the Republic of Ireland, this guarantee will be governed by Irish law and the Irish
courts will have jurisdiction.
This guarantee is provided by Beko plc. Beko House, 1 Greenhill Crescent, Watford, Hertfordshire. WD18
8QU.
Beko plc is registered in England and Wales with company registration
number 02415578
34 / 36 EN
Refrigerator / User Manual
BEKO UK AND IRELAND BUILT-IN APPLIANCES GUARANTEE TERMS AND CONDITIONS
If you have purchased a built-in or integrated appliance, and registered it within 90 days of purchase
by completing the online registration form, then the standard 12 month guarantee will be extended to
24 months, under the same terms and conditions as detailed in our Standard Guarantee Terms and
Conditions.
Beko Free standing appliances come with a 12 month parts and labour guarantee as standard,
Beko Built-in appliances come with a 12 month parts and labour guarantee as standard. This is extended
to 24 months, free of charge, upon registration of the appliance. When you register your appliance for
additional guarantee, you will automatically activate the ProSmart Motor 10 year guarantee. You do not
need to register twice. (beko.co.uk/guarantee-terms).
To make a claim against your Beko ProSmart Inverter Motor Guarantee (the “Guarantee”), all customer
and product details must be registered with Beko plc using the procedure outlined below.
1. This extra 9 years (for free standing appliances) or 8 years (for built-in or integrated appliances)
guarantee is only effective after the expiration of the standard manufacturer’s guarantee.
2. It is only valid for the ProSmart Inverter motors of selected washing machines, washer-dryers,
tumble dryers and dishwashers. It does not cover any labour charge or any other components of the
product. In addition, it is only valid for one replacement of the ProSmart motor during the extra 9-year (for
free standing appliances) or 8 year (for built-in appliances) guarantee period.
3. To activate your guarantee, you MUST register your appliance within 90 days of the original
purchase date, by visiting beko.co.uk/register.
4. Customers will receive a unique reference code as proof of guarantee validation by email or post,
which must be quoted at the time of a claim being made.
5. Any repair/replacement of the ProSmart Inverter motor must only be carried out by an authorised
Beko Service Agent (the “Service Agent”).
6. Labour for the repair/replacement of the ProSmart Inverter motor is not included in this guarantee
and is chargeable directly by the Service Agent.
35 / 36 EN
Refrigerator / User Manual
7. Any additional components fitted to the product at any time will not be covered by this guarantee
and will be chargeable directly by the Service Agent.
8. The guarantee is not transferable and cannot be exchanged for cash.
9. There are no alternative or additional offers to this Guarantee.
10. The guarantee is exclusive of the manufacturer’s standard guarantee
11. The Terms and Conditions shown above are in addition to the standard terms and conditions of
your product guarantee. Please read and refer to such Terms and Conditions when making any claim.
12. We may use the information you provide for marketing purposes and to analyse your purchasing
preferences. We may keep your information for a reasonable period for these purposes in accordance
with the applicable Data Protection Laws and General Data Protection Regulations (GDPR). You can opt
into this service during the registration process. Further details are available at http://www.beko.co.uk/
cookie-and-privacy.
13. These Terms and Conditions are governed by the laws of England and Wales; manufacturer: Beko
plc, Beko House, 1 Greenhill Crescent, Watford WD18 8QU. Company Registration Number: 02415578.
HOW TO OBTAIN SERVICE FOR YOUR APPLIANCE
Please keep your purchase receipt or other proof of purchase details in a safe place; you will need to
have this documentation available should the product require attention under guarantee.
Please take a few moments to complete the details below, as you will need this information when you call
us, or to use our online services. When you call us you may be required to input your serial number into
your telephone keypad. For help please visit beko.co.uk/support/model-finder
• The product model number is printed on the Operating Instruction Booklet / User guide
• The product model and serial number is printed on the Rating Label affixed to the appliance.
36 / 36 EN
Refrigerator / User Manual
• The Retailer (Purchased from) and Date of purchase will be printed on your purchase receipt or other
proof of purchase paperwork
Recording of these details alone will not count as proof of purchase. A valid proof of purchase is required for
requesting service under guarantee.
Model number Serial number Purchased from Date of purchase
For service under guarantee or for product advice please call our Contact centre
Before requesting service please check the troubleshooting guide in the Operating Instructions booklet,
as a charge may be levied where no fault is found, and even though your product may still be under
guarantee.
After arranging service the area around the product must be easily accessible to the Engineer, without the
need for cabinets or furniture to be removed or moved.
It is your responsibility to ensure our Engineers have a clean and safe environment to carry out any
repairs.
Please have your Model number and Serial number available when you call us, as you may be required to
input your serial number into your telephone keypad during your call.
UK Mainland & Northern Ireland:
0333 207 9710
Landline or mobile calls to 0333 numbers cost no more than calls to geographic numbers 01 or 02, and
are charged at the basic rate. Calls from landlines and mobiles are included in free call packages but
please check with your telephone service provider for exact call charges.
Republic of Ireland:
01 862 3411
Service once the manufacturers guarantee has expired
If you have purchased an extended guarantee please refer to the instructions contained within the
extended guarantee agreement document, otherwise please call us using the appropriate number above,
where service can be obtained at a charge.
37 / 36 EN
Refrigerator / User Manual
Should you experience any difficulty in obtaining service please call us on 0333 207 9710 or 01 862 3411
Contact us though our website
Send us a secure message through our online contact us form. Please visit our website, click Contact Us
and choose a product support topic from the list of options. Complete the required details and click send
message.
Product registrations
For UK registrations please visit beko.co.uk/register and for the Republic of Ireland visit beko.ie/register.
DISCLAIMER / WARNING
Some (simple) failures can be adequately handled by the end-user without any safety issue or
unsafe use arising, provided that they are carried out within the limits and in accordance with the
following instructions (see the “Self-Repair” section).
Therefore, unless otherwise authorized in the “Self-Repair” section below, repairs shall be
addressed to registered professional repairers in order to avoid safety issues. A registered
professional repairer is a professional repairer that has been granted access to the instructions
and spare parts list of this product by the manufacturer according to the methods described in
legislative acts pursuant to Directive 2009/125/EC.
However, only the service agent (i.e. authorized professional repairers) that you can
reach through the phone number given in the user manual/warranty card or through
your authorized dealer may provide service under the guarantee terms. Therefore,
please be advised that repairs by professional repairers (who are not authorized by
Beko) shall void the guarantee.
Self-Repair
Self-repair can be done by the end-user with regard to the following spare parts: door
handles,door hinges, trays, baskets and door gaskets (an updated list is also available in support.
beko.com as of 1st March 2021).
Moreover, to ensure product safety and to prevent risk of serious injury, the mentioned self-repair
shall be done following the instructions in the user manual for self-repair or which are available in
support.beko.com. For your safety, unplug the product before attempting any self-repair.
Repair and repair attempts by end-users for parts not included in such list and/or not following the
instructions in the user manuals for self-repair or which are available in support.beko.com, might
give raise to safety issues not attributable to Beko, and will void the warranty of the product.
Therefore, it is highly recommended that end-users refrain from the attempt to carry out repairs
falling outside the mentioned list of spare parts, contacting in such cases authorized professional
repairers or registered professional repairers. On the contrary, such attempts by end-users may
cause safety issues and damage the product and subsequently cause fire, flood, electrocution and
serious personal injury to occur.
By way of example, but not limited to, the following repairs must be addressed to authorized
professional repairers or registered professional repairers: compressor, cooling circuit, main
board,inverter board, display board, etc.
The manufacturer/seller cannot be held liable in any case where end-users do not comply with
the above.
The spare part availability of the refrigerator that you purchased is 10 years.
During this period, original spare parts will be available to operate the refrigerator properly
The minimum duration of guarantee of the refrigerator that you purchased is 24 months.
This product is equipped with a lighting source of the "G" energy class.
The lighting source in this product shall only be replaced by professional repairers.
