Technical Support and E-Warranty Certificate www.vevor.com/support
VIBRATING ROLLER
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major top
brands and does not necessarily mean to cover all categories of tools offered by us. You are
kindly reminded to verify carefully when you are placing an order with us if you are actually saving
half in comparison with the top major brands.
- 1 -
MODEL: HY-5007
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
Technical Support and E-Warranty Certificate www.vevor.com/support
This is the original instruction, please read all manual instructions carefully before
operating. VEVOR reserves a clear interpretation of our user manual. The
appearance of the product shall be subject to the product you received. Please
forgive us that we won't inform you again if there are any technology or software
updates on our product.
- 2 -
PARAMETER
Model
Product Size
Attachment
Recommended
Charger
HY-5007
Φ120*400mm
1* USB Cable
5V, 2A
(Not included)
Warning-To reduce the risk of injury, user must read instructions
manual carefully.
FCC Information:
CAUTION: Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to
operate the equipment!
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1) This product may cause harmful interference.
2)This product must accept any interference received, including
interference that may cause undesired operation.
WARNING: Changes or modifications to this product not expressly
approved by the party.responsible for compliance could void the
user's authority to operate the product.
Note: This product has been tested and found to comply with the
limits for a Class B digital device pursuant to Part 15 of the FCC
Rules, These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This product generates, uses and can radiate radio frequency
energy, and if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this product does cause
harmful interference to radio or television reception,which can be
determined by turning the product off and on, the user is encouraged
- 3 -
to try to correct the interference by one or more of the following
measures.
· Reorient or relocate the receiving antenna.
· Increase the distance between the product and receiver.
· Connect the product to an outlet on a circuit different from that to
which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for
assistance.
CORRECT DISPOSAL
This product is subject to the provision of european Directive
2012/19/EU. The symbol showing a wheelie bin crossed through
indicates that the product requires separate refuse collection in the
European Union. This applies to the product and all accessories
marked with this symbol. Products marked as such may not be
discarded with normal domestic waste, but must be taken to
acollection point for recycling electrical and electronic devices.
BATTERY DISPOSAL
To minimize hazards to health and the environment at the end of this
product's life，laws dealing with Waste Electrical and Electronic
Equipment（WEEE）and The Waste Battery Directive require you to
dispose of this product at a suitable collection facility where it will be
sent in order to remove the batteries and for appropriate
recycling.Please contact your local authorities for more details on
recycling and safe disposal of these in your area.
GENERAL SAFETY INSTRUCTIONS
The important precautions described within this section must be followed carefully
to prevent any injuries and/or property damage.
1. The appliance is not intended to be used by children and people with physical
or mental disabilities without supervision.
2. Make sure to connect the appliance to a power outlet that has the same
corresponding power as described in the specifications.
3. Do not place the appliance near heat sources, open flames, wet areas, near
- 4 -
sharp or flammable objects, and under direct sunlight.
4. Place the appliance on a flat surface in a well-ventilated area.
5. Do not immerse the appliance and its USB cable in water or any other liquid.
6. This appliance is not recommended to be used by people with skin disorders,
open wounds, swollen or inflamed body areas, people who suffer heart
disease, and people that are using electronic medical devices such as
pacemakers and hearing aids.
7. People with body traumas or fractures, women in their menstrual period, and
pregnant women are recommended to consult a doctor before using the
appliance.
8. Do not use the appliance for more than its recommended 30 minutes for one
time to prevent overuse.
9. Always turn off the appliance after use.
10. Do not use the appliance at the same time with other medical equipment.
11. Only use this appliance for its intended use described in this manual.
12. This appliance is for household use only, do not use it outdoors.
CLEANING AND MAINTENANCE
1. Make sure to turn off and unplug the appliance before cleaning.
2. To clean the appliance, wipe it by using a soft cloth.
3. Do not use abrasive cleaners to clean the appliance.
4. Do not immerse the appliance in water or any other liquid.
5. Store the appliance in a safe, dry place when not in use. It is recommended to
store the appliance inside its packaging box to avoid damage.
- 5 -
SPECIFICATION
Power：
10W
Voltage：
DC5V,2A
Battery Capacity
：
2200mAh
Plug Type
：
USB type-C
HOW TO USE
NOTE:
1. The appliance has built-in battery. Please fully charge it before use.
2. Please also charge it within 1 week after the battery runs out, or the battery
will be useless.
3. After fully charged, the indicator lights of the battery capacity will be on.
Please remove the USB cable from the appliance after charge.
4. Before charging the appliance, please turn off the appliance if it is on.
5. During charging, the appliance can not work.
Push
to ON to enter into the standby status. The corresponding indicator
light of battery capacity will be on.
- 6 -
Then press
button to turn on the appliance. The timer is 15 minutes. The
default status is vibration level 1 and mode 1, and the related indicator lights will be
on. Press the button once, the intensity level will be changed once, and the
sequence of change is level 1 → level 2 → level 3 → level4 → level 1, and the
corresponding indicator light(s) of vibration level will be on. When the appliance is
working, long press this button to turn it off, and the indicator lights of vibration
level and mode will be off. After the appliance is working for 15 minutes, the
appliance will be off automatically.
After use, push
to OFF to protect the battery.
When the appliance is working, press
to change the mode status. The
sequence of change is Mode 1 → Mode 2 → Mode 3 → Mode 1. The related
indicator light will be on.
XIAMEN HIGH TOP ELECTRONIC TECHNOLOGY CO.,LTD.
Address: F2-5, No.118 Siming Garden, Tong'an Industrial Park, Xiamen
City.FUJIAN, 361000, CHINA
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122
Australia
Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place,
Rancho Cucamonga, CA 91730
REP
EC
E-CrossStu GmbH
Mainzer Landstr.69, 60329 Frankfurt am Main.
REP
UK
YH CONSULTING LIMITED.
C/O YH Consulting Limited Office 147, Centurion House,
London Road, Staines-upon-Thames, Surrey, TW18 4AX
